High-performance C60 and picene thin film field-effect transistors with conducting polymer electrodes in bottom contact structure

C₆₀ and picene thin film field-effect transistors (FETs) in bottom contact structure have been fabricated with poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) electrodes for a realization of mechanical flexible organic FETs. The C₆₀ thin film FETs showed n-channel enhancement-type characteristics with the field-effect mobility μ value of 0.41 cm² V^?1 s^?1, while the picene thin film FET showed p-channel enhancement-type characteristics with the μ of 0.61 cm² V^?1 s^?1. The μ values recorded for C₆₀ and picene thin film FETs are comparable to those for C₆₀ and picene thin film FETs with Au electrodes.     

Energy transmission transformer for a wireless capsule endoscope: analysis of specific absorption rate and current density in biological tissue

This paper reports on the electromagnetic influences on the analysis of biological tissue surrounding a prototype energy transmission system for a wireless capsule endoscope. Specific absorption rate (SAR) and current density were analyzed by electromagnetic simulator in a model consisting of primary coil and a human trunk including the skin, fat, muscle, small intestine, backbone, and blood. First, electric and magnetic strength in the same conditions as the analytical model were measured and compared to the analytical values to confirm the validity of the analysis. Then, SAR and current density as a function of frequency and output power were analyzed. The validity of the analysis was confirmed by comparing the analytical values with the measured ones. The SAR was below the basic restrictions of the International Commission on Nonionizing Radiation Protection (ICNIRP). At the same time, the results for current density show that the influence on biological tissue was lowest in the 300-400 kHz range, indicating that it was possible to transmit energy safely up to 160 mW. In addition, we confirmed that the current density has decreased by reducing the primary coil's current.     

Advanced Wireless Access System

The key words for the future telecommunications are personalization, multi-media services and high accessibility to the network. These trends naturally lead to radio media application to access links. In this sense, this paper proposes an advanced wireless access system with a capacity supporting broadband video and data services.Concept of the system can be defined as a new radiocommunication category with advantages of both fixed and mobile systems.The system is designed to transport ATM-based signals using SHF (or EHF) bands to wireless terminals, interconnected with optical fibers at the network side. The basic system configuration is presented as well as examples of system parameters.For radio aspects the maximum service coverages of the radio base stations are calculated based on availability consideration. Preferred frequency bands for actual operation are also discussed.     

Silicon based on-chip antenna using an LC resonator for near-field RF systems

This paper presents the silicon based on-chip antenna using a LC resonator. The proposed antenna consists of a stacked capacitor and a spiral inductor on silicon substrate. The spiral inductor structure without underpass was proposed for improvement the performance of the silicon based-antenna. The resonant frequency of the fabricated antenna was measured as 465 MHz. Its return loss was 23.4 dB at resonant frequency. The antenna has a gain of ?35.75 dBi due to small size and silicon substrate. However, the fabricated antenna has good performance in the near-field.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.     

HVEM study of crack-tip dislocations in Si crystals prepared by FIB and twin-blade cutting method

Crack-tip dislocations in silicon crystals have been examined by using high-voltage electron microscopy. Cracks were introduced by the Vickers indentation method at room temperature and the indented specimens were annealed at high temperatures to induce dislocations around crack tips under the presence of residual stress due to the indentation. A selected area around a crack tip was thinned by a focused ion beam (FIB) technique. Specimens were thinned in advance by a twin-blade cutting (TBC) method, which is a simple cutting process for saving FIB machine time. A combination of FIB and TBC can be a useful thinning procedure for the efficient preparation of transmission electron microscopy specimens. Characteristic dislocation structures were observed around the tip of a crack, aiding the elucidation of dislocation processes, which is essential to increase the fracture toughness of materials.     

A Reliable All-2D Materials Artificial Synapse for High Energy-Efficient Neuromorphic Computing

High-performance artificial synaptic devices are indispensable for developing neuromorphic computing systems with high energy efficiency. However, the reliability and variability issues of existing devices such as nonlinear and asymmetric weight update are the major hurdles in their practical applications for energy-efficient neuromorphic computing. Here, a two-terminal floating-gate memory (2TFGM) based artificial synapse built from all-2D van der Waals materials is reported. The 2TFGM synaptic device exhibits excellent linear and symmetric weight update characteristics with high reliability and tunability. In particular, the high linearity and symmetric synaptic weight realized by simple programming with identical pulses can eliminate the additional latency and power consumption caused by the peripheral circuit design and achieve an ultralow energy consumption for the synapses in the neural network implementation. A large number of states up to ≈3000, high switching speed of 40 ns and low energy consumption of 18 fJ for a single pulse have been demonstrated experimentally. A high classification accuracy up to 97.7% (close to the software baseline of 98%) has been achieved in the Modified National Institute of Standards and Technology (MNIST) simulations based on the experimental data. These results demonstrate the potential of all-2D 2TFGM for high-speed and low-power neuromorphic computing.     

Structural advantages of rectangular-like channel cross-section on electrical characteristics of silicon nanowire field-effect transistors

We have experimentally demonstrated structural advantages due to rounded corners of rectangular-like cross-section of silicon nanowire (SiNW) field-effect transistors (FETs) on on-current (I_ON), inversion charge density normalized by a peripheral length of channel cross-section (Q_inv) and effective carrier mobility (μ_eff). The I_ON was evaluated at the overdrive voltage (V_OV) of 1.0 V, which is the difference between gate voltage (V_g) and the threshold voltage (V_th), and at the drain voltage of 1.0 V. The SiNW nFETs have revealed high I_ON of 1600 μA/μm of the channel width (w_NW) of 19 nm and height (h_NW) of 12 nm with the gate length (L_g) of 65 nm. We have separated the amount of on-current per wire at V_OV = 1.0 V to a corner component and a flat surface component, and the contribution of the corners was nearly 60% of the total I_ON of the SiNW nFET with L_g of 65 nm. Higher Q_inv at V_OV = 1.0 V evaluated by advanced split-CV method was obtained with narrower SiNW FET, and it has been revealed the amount of inversion charge near corners occupied 50% of all the amount of inversion charge of the SiNW FET (w_NW = 19 nm and h_NW = 12 nm). We also obtained high μ_eff of the SiNW FETs compared with that of SOI planar nFETs. The μ_eff at the corners of SiNW FET has been calculated with the separated amount of inversion charge and drain conductance. Higher μ_eff around corners is obtained than the original μ_eff of the SiNW nFETs. The higher μ_eff and the large fractions of I_ON and Q_inv around the corners indicate that the rounded corners of rectangular-like cross-sections play important roles on the enhancement of the electrical performance of the SiNW nFETs.     

Programmed High‐Hole‐Mobility Supramolecular Polymers from Disk‐Shaped Molecules

In this paper a simple, casting solution technique for the preparation of two‐dimensional (2D) arrays of very‐high molecular weight (MW) 1D‐Pc supramolecular inorganic polymers is described. The soluble fluoroaluminium tetra‐tert‐butylphthalocyanine (ttbPcAlF) is synthesized and characterized, which can be self‐assembled to form 2D arrays of very‐high‐MW 1D‐Pc supramolecular inorganic polymers. High‐resolution transmission electron microscopy (HRTEM) demonstrates that the 1D‐ttbPcAlF, having a cofacial ring spacing of ～0.36 nm and an interchain distance of ～1.7 nm, self‐assembles into 2D‐nanosheets (～140 nm in length, ～20 nm in width, and equivalent to MW of 3.2 × 10⁵ g mol^?1). The film cast from a 1,2‐dichloroethane (DCE) solution shows a minimum hole‐mobility of ～0.3 cm² V^?1 s^?1 at room temperature by flash‐photolysis time‐resolved microwave conductivity (TRMC) measurements and a fairly high dark dc‐conductivity of ～1 × 10^?3 S cm^?1.     

Reliability of Liquid Crystal Display

This paper reports the reliability of twisted nematic liquid-crystal display for basic applications such as watches and calculators. We have studied significant stress factors such as voltage, temperature and humidity, and their corresponding failure modes. The main failure mode is LCD misalignment; many different modes appear corresponding to different stress conditions as well as material and process for the LCD. We have analyzed the accelerated test results by Weibull distribution, elucidated accelerating factors, and estimated life time. The life is inversely proportional to 1.78-2.45 power of applied voltage, depending upon misalignment modes. The distribution of life is well expressed by Weibull distribution with shape parameter between 2.5-3.0, and proportional to the square of coefficient of variation of life. We conclude that the acceleration factors could be determined and 99.9% of tested displays will live more than 10 years. The knowledge on reliability of LCD can be now applied to new fields of LCD, such as industrial use, home appliance, and automotive instruments.