Evaluation of temperature characteristics of high-efficiency InGaP/InGaAs/Ge triple-junction solar cells under concentration

Temperature characteristics of the open-circuit voltage (V_oc) were investigated in the temperature range from 30°C to 240°C for the InGaP/InGaAs/Ge triple-junction cells. Also, single-junction cells that had the similar structure to the subcells in the triple-junction cells were studied. In the high-temperature range (from 170°C to 240°C), the temperature coefficients of V_oc of the InGaP/InGaAs/Ge triple-junction solar cell (dV_oc/dT) were different from those in the low-temperature range (from 30°C to 100°C). This is because photo-voltage from the Ge subcell becomes almost 0 V in the high-temperature range. It was found that the open-circuit voltage of a Ge single-junction cell reduced to almost 0 V temperatures over 120°C under 1 sun condition.     

Numerical computation on the control of aerial flow by the magnetizing force in gravitational and nongravitational fields

Two-dimensional numerical computations were carried out in order to examine the effect of magnetizing force for the air in a cylindrical container with thermal and magnetic field gradients. In a gravitational field, the air was driven by both gravitational and magnetizing forces, and flow pattern and the heat transfer rate greatly depended on the axial position of the coil. Moreover, when the magnetizing and gravitational forces cancel out each other, convection became almost quiescent. On the other hand, the aerial flow was induced by the magnetizing force even in a nongravitational field, and the air behaved like an electrically conducting fluid.     

Soluble network polymers based on trifluoropropyl-substituted open-cage silsesquioxane: Synthesis,properties, and application for surface modifiers

Fluorinated completely condensed polyhedral oligomeric silsesquioxanes (F-CC-POSSs) are widely utilized as surface modifiers for polymeric materials because of their polyhedral and fluorine-rich structures, which generate polymers with lower surface energies under molecular-level control. In contrast, their derivatives, fluorinated incompletely condensed or open-cage POSSs (F-IC-POSSs), have similarly intriguing structures, but their utilization for polymer synthesis remains undeveloped. Herein, fluorinated network polymers were prepared based on a 3,3,3-trifluoropropyl-substituted IC-POSSs via hydrosilylation polymerization with isobutyl- and phenyl-substituted IC-POSS under optimized conditions. In addition to their good thermal stability and tunable refractive indices, these polymers exhibited solution processability and their casting films showed excellent optical transparency, indicating their potential for constructing fluorinated polymers. Their utilization as surface modifiers was examined by addition to poly(methylmethacrylate) (PMMA) films. Intriguingly, modified PMMA films with 2.0 and 0.5 wt% addition showed similar hydrophobicity and surface energies to the films prepared with only fluorinated network polymers.     

Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel

A nanoindentation hardness testing system, including an atomic-force microscope (AFM)-based nanoindentation tester and a calibration method using electrolytically polished single-crystal metals as references, was proposed. This was applied to a study of the mechanical properties of fine-grained ferritic steel (grain size of 1.2 μm) and coarse-grained ferritic steel (30 μm). An empirical function giving the macroscopic hardness for all four reference metals from the nanoindentation force curves was established. The converted Vickers hardness (HV*) of the coarse-grained steel is almost independent of the indent size. The fine-grained steel shows only HV* 130 with an indent of only 100 nm, compared with a macroscopic hardness of HV 210. The difference, HV 80, is considered to reflect the amount of grain-boundary strengthening. The critical indent size for the hardness transition seems to be around 1 μm, comparable to the grain size of the specimen. This result supports the explanation of grainboundary strengthening. It is also consistent with Pickering’s work on low-carbon steel, as the estimated locking parameter (k of 2.6×10⁵ N/m^3/2) in the Hall-Petch relationship is in good agreement with his value of 2.4×10⁵ N/m^3/2.     

EFFECTS OF HEXASULFOBUTYLATED C60 ON THE GASTRIC CIRCULAR MUSCLE OF GUINEA PIG

The effects of hexasulfobutylated (FC₄S), the fullerene derivative on the contraction of smooth muscle were tested pharmacologically on the circular muscle of stomach of guinea pigs. The effects of monomalonic acid C₆₀ (MMA C₆₀) on the same preparations were compared. The effects of those compounds on the taenia coli, portal vein and vas deferens of guinea pigs were also tested. The FC₄S did, while MMA C₆₀ did not elicit contracture of the circular muscle of stomach and taenia coli. Both FC₄S and MMA C₆₀ did not elicit contraction on the portal vein and on the vas deferens of the guinea pig. Prazosin (0.5 μM) or propranolol (0.5 μM) did not alter the FC₄S elicit contracture of the circular muscle of stomach. However, atropine (0.01, 0.1 and 1 μM), tetrodotoxin (0.1 μM) or low calcium medium decreased reversibly the FC₄S elicited contracture of the circular muscle of stomach. The effect of FC₄S on the contracture of the gastric muscles was also tested using various muscarinic receptor subtype antagonists. 4-DAMP (1 μM), muscarinic M3 receptor antagonist, and tropicamide (1 μM), muscarinic M4 receptor antagonist, did not alter the contracture elicited by FC₄S. Pirenzepine (0.1 μM), muscarinic M1 receptor antagonist, and methoctramine (0.25 μM), muscarinic M2 receptor antagonist, significantly decreased the FC₄S elicited contracture of the circular muscle. Atropine (1 μM) or tetrodotoxin (0.1 μM) completely blocked the FC₄S elicited contracture of the circular muscle of stomach. It is concluded that FC₄S elicited contracture of the circular muscle of stomach. The effect may be due to FC₄S acts on the cholinergic cells existed in the gastric muscle and indirectly activating the tetrodotoxin dependent releasing of the transmitters from the cells, then, activating the muscarinice M1, M2 receptors in the muscle eliciting the contractures.     

Single molecule fluorescence autocorrelation measurement on anisotropic molecular diffusion in nematic liquid crystal

Diffusion kinetics of three dyes in nematic liquid crystals are studied with single-molecule fluorescence autocorrelation spectroscopy. Markedly large anisotropy was observed in the diffusion coefficient and structure of diffusion molecules showed no marked effect on the anisotropy.     

Poly(dithiafulvene)s containing alkoxy groups and mesogenic moiety in the side chain: synthesis,properties and their charge-transfer complex

Summary Poly(dithiafulvene)s having alkoxy group and mesogenic moiety in the side chain were prepared by cycloaddition polymerization. The effects of the side chains on the structural and optical properties of poly(dithiafulvene)s in solution were investigated. Furthermore, the film state properties of the polymers and their charge transfer complex with electron acceptor were studied before and after annealing.     

Anionic surfactants: lauric products

Lauryl sulfate and lauryl ether sulfate obtained by the sulfation of lauryl alcohol and lauryl alcohol ethoxylate are representative of anionic surfactants and are used as a formable detergent or an emulsifier. For the sulfation of lauryl alcohol and lauryl alcohol ethoxylate, SO₃ gas, it was found that the quality of products was significantly influenced by the reaction conditions. In order to obtain good quality products we developed a new technology by using a new type of reactor called a “climbing film reactor,” in which SO₃ gas and liquid raw material flow ascendingly.     

DNA taken into Bacillus subtilis competent cells by lysed-protoplast transformation is not ssDNA but dsDNA

Competent Bacillus subtilis incorporates whole-genome DNA (4215 kb) from the protoplast lysate of B. subtilis subtilis [Akamatsu, T. and Taguchi, H., Biosci. Biotechnol. Biochem., 65, 823-829 (2001)]. A continuous incorporated DNA is longer than 1500 kb [J. Biosci. Bioeng., 101, 257-262 (2006)]. Whether the incorporated DNA is single-stranded (ssDNA) or double-stranded DNA (dsDNA) has been studied by examining the transforming activity of the incorporated DNA. B. subtilis BEST7027 was used as the donor strain, which has a heterologous region consisting of the 145 kb region of the Synechocystis sp. PCC6803 genome and erm gene. The donor DNA was transferred to a wild-type or a recA recipient strain (AYG2 or SYN9), and protoplast lysate was prepared from the transformants and used as the donor DNA source for the second recipient strain (AU1 or AV1). The intergenote region showed a significant transforming activity. When DNase I was added to both cells collected from the first transformation mixture and the following protoplastization, the result was similar to that obtained without DNase I. All of the observations strongly suggest that the incorporated DNA is dsDNA, and the transformation of competent B. subtilis by DNA in protoplast lysate is different from that by purified DNA taken up conventionally.     

A variational approach to multi-phase motion of gas, liquid and solid based on the level set method

We propose a simple and robust numerical algorithm to deal with multi-phase motion of gas, liquid and solid based on the level set method [S. Osher, J.A. Sethian, Front propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulation, J. Comput. Phys. 79 (1988) 12; M. Sussman, P. Smereka, S. Osher, A level set approach for capturing solution to incompressible two-phase flow, J. Comput. Phys. 114 (1994) 146; J.A. Sethian, Level Set Methods and Fast Marching Methods, Cambridge University Press, 1999; S. Osher, R. Fedkiw, Level Set Methods and Dynamics Implicit Surface, Applied Mathematical Sciences, vol. 153, Springer, 2003]. In Eulerian framework, to simulate interaction between a moving solid object and an interfacial flow, we need to define at least two functions (level set functions) to distinguish three materials. In such simulations, in general two functions overlap and/or disagree due to numerical errors such as numerical diffusion. In this paper, we resolved the problem using the idea of the active contour model [M. Kass, A. Witkin, D. Terzopoulos, Snakes: active contour models, International Journal of Computer Vision 1 (1988) 321; V. Caselles, R. Kimmel, G. Sapiro, Geodesic active contours, International Journal of Computer Vision 22 (1997) 61; G. Sapiro, Geometric Partial Differential Equations and Image Analysis, Cambridge University Press, 2001; R. Kimmel, Numerical Geometry of Images: Theory, Algorithms, and Applications, Springer-Verlag, 2003] introduced in the field of image processing.