A 16-Mb Toggle MRAM With Burst Modes

This paper describes a recently developed 16-Mb toggle magnetic random access memory (MRAM). It has 100-MHz burst modes that are compatible with a pseudo-SRAM even though the toggle cell requires reading and comparing sequences in write modes. To accelerate operating clock frequency, we propose a distributed-driver wide-swing current-mirror scheme, an interleaved and pipelined memory-array group activation scheme, and a noise-insulation switch scheme. These circuit schemes compensate the toggle cell timing overhead in write modes and maintain write-current precision that is essential for the wide operational margin of MRAMs. Because toggle cells are very resistant to write disturbance errors, we designed the 16-Mb MRAM to include a toggle MRAM cell. The MRAM was fabricated with 0.13-mum CMOS and 0.24-mum MRAM processes with five metal layers.     

Estimate of physiological variability of peak latency in single sweep P300

Lengthening is generally accepted method of treatment for extremity length discrepancy. This attractive method carries the risk of many complications that may ruin primary treatment plan. The aim of this paper was to analyze complications and their management in own material consisting of 60 extremities in 58 patients aged 8-37 years. Limb length discrepancy was caused by congenital bony hypoplasia in 44 cases, trauma in 8 and infection in 8 cases. Initial shortening ranged from 4 to 15 cm (mean 6.5 cm). Ilizarov technique was used in 20 cases, Wagner method in 6 cases and DeBastiani in 34 cases. Expected elongation has been achieved in 60% cases; in remaining 40% complications occurred. New bone formation disturbances and axial malalignement were among most severe ones. An autogenic marrow injections were used to stimulate callus formation, osteogenon was administered. Axial malalignement was corrected by osteotomy. Percentage of complications decreased as number of elongations performed increased.     

Transparent Hydroxyapatite Prepared by Hot Isostatic Pressing of Filter Cake

Hydroxyapatite powder was synthesized and formed into a compact in an aqueous medium using a filter-cake method. The compact was hot isostatically pressed at 700° to 1000°C and 100 MPa for 2 h. Fully dense, transparent materials were obtained above 800°C. Both forming and densification methods were found to be important in obtaining transparent materials.     

Removal of NO by absorption and the subsequent reduction method using YBa2Cu3Oy and Ce-ZSM-5

The effectiveness of the ab(ad)sorption and the subsequent reduction (abbreviated as ASR hereafter) system for the removal of highly dilute NO has been examined using a flow-type reaction system. The ASR system comprises two serial processes: first, NO is absorbed into (and/or adsorbed on) the system in the presence of O₂ until saturation, and then the absorbed NO is decomposed, for example, by reduction at a higher temperature in the presence of propene and oxygen. YBa₂Cu₃O_y (YBC) and Ce-ZSM-5 were chosen in this study as materials for absorption and reduction, respectively. Efficient removal of NO was attained when the first layer consisting of a mixture of YBC and Ce-ZSM-5 was combined with the second layer of Ce-ZSM-5, and propene was additionally introduced between the two layers during the reductive decomposition. By this ASR system, the amount of NO absorption reached 1.5 mol per mole of YBC at 573 K and 60% of the NO absorbed was selectively decomposed to N₂ at 623 K in 9 h (N balance, 75%; N₂ selectivity, 79%).     

Development of a 3-D simulation analysis system for PWR control rod drive mechanism

A 3-D virtual analysis system to analyze the motion of control rod drive mechanism (CRDM) was developed. The analysis system consists of a 3-D model established as per the actual dimensions and interfaces of CRDM parts and a routine to calculate the forces acting on the mechanism, and was verified by mock-up test using the same equipment as the actual product. The analysis system is useful for functional evaluation in maintenance or to factor out root causes in the case of malfunction of CRDM.     

Recording of bridge damage areas by 3D integration of multiple images and reduction of the variability in detected results

Machine learning models have been developed to perform damage detection using images to improve bridge inspection efficiency. However, in damage detection using images alone, the 3D coordinates of the damage cannot be recorded. Furthermore, the accuracy of the detection depends on the quality of the images. This paper proposes a method to integrate and record the damage detected from multiple images into a 3D model using deep learning to detect the damage from bridge images and structure from motion to identify the shooting position. The proposed method reduces the variability of the detection results between images and can assess the scale of damage or, conversely, where there is no damage and the extent of inspection omissions. The proposed method has been applied to a real bridge, and it has been shown that the actual damage locations can be recorded as a 3D model.     

Evaluation of temperature characteristics of high-efficiency InGaP/InGaAs/Ge triple-junction solar cells under concentration

Temperature characteristics of the open-circuit voltage (V_oc) were investigated in the temperature range from 30°C to 240°C for the InGaP/InGaAs/Ge triple-junction cells. Also, single-junction cells that had the similar structure to the subcells in the triple-junction cells were studied. In the high-temperature range (from 170°C to 240°C), the temperature coefficients of V_oc of the InGaP/InGaAs/Ge triple-junction solar cell (dV_oc/dT) were different from those in the low-temperature range (from 30°C to 100°C). This is because photo-voltage from the Ge subcell becomes almost 0 V in the high-temperature range. It was found that the open-circuit voltage of a Ge single-junction cell reduced to almost 0 V temperatures over 120°C under 1 sun condition.     

Radical-induced degradation mechanism of perfluorinated polymer electrolyte membrane

The degradation mechanism induced by radicals was investigated for Nafion^®-117 by solution analysis. Nafion^® was exposed independently to three kinds of radicals, OH, H and O₂⁻ which were produced separately by γ-irradiation. Based on the eluted elements, the scission site in the membrane was analyzed. The results showed that the scission site was classified into two and these locations were closely relating to oxidative and reductive reactions. The decreasing rate of proton conductivity was more significant under the influence of reductive radicals. The progression of the unzipping reaction of main chain was suggested to be initiated by the production of tertiary carbon radical by reductive radicals such as H and O₂⁻ with the aid of OH. The structural degradation such as collapse of cluster and the cluster decomposition as well as the performance degradation was found to be initiated by such reductive radicals.     

Nano-strip grating lines self-organized by a high speed scanning CW laser

After a laser annealing experiment on Si wafer, we found an asymmetric sheet resistance on the surface of the wafer. Periodic nano-strip grating lines (nano-SGLs) were self-organized along the trace of one-time scanning of the continuous wave (CW) laser. Depending on laser power, the nano-trench formed with a period ranging from 500 to 800 nm with a flat trough between trench structures. This simple method of combining the scanning laser with high scanning speed of 300 m min(-1) promises a large area of nanostructure fabrication with a high output. As a demonstration of the versatile method, concentric circles were drawn on silicon substrate rotated by a personal computer (PC) cooling fan. Even with such a simple system, the nano-SGL showed iridescence from the concentric circles.     

Bioaugmented membrane bioreactor (MBR) with a GAC-packed zone for high rate textile wastewater treatment

The long-term performance of a bioaugmented membrane bioreactor (MBR) containing a GAC-packed anaerobic zone for treatment of textile wastewater containing structurally different azo dyes was observed. A unique feeding strategy, consistent with the mode of evolution of separate waste streams in textile plants, was adopted to make the best use of the GAC-zone for dye removal. Dye was introduced through the GAC-zone while the rest of the colorless media was simultaneously fed through the aerobic zone. Preliminary experiments confirmed the importance of coupling the GAC-amended anaerobic zone to the aerobic MBR and also evidenced the efficacy of the adopted feeding strategy. Following this, the robustness of the process under gradually increasing dye-loading was tested. The respective average dye concentrations (mg/L) in the sample from GAC-zone and the membrane-permeate under dye-loadings of 0.1 and 1 g/L.d were as follows: GAC-zone (3, 105), permeate (0, 5). TOC concentration in membrane-permeate for the aforementioned loadings were 3 and 54 mg/L, respectively. Stable decoloration along with significant TOC removal during a period of over 7 months under extremely high dye-loadings demonstrated the superiority of the proposed hybrid process.