Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Observation of metal on Si(0 0 1) by STM/STS and its consideration based on the first principles calculations

Local density of states (LDOS) is obtained by the first principles calculation based on the density functional theory on the Si(0 0 1)2 × 1 surface and on the surface with an Al dimer. At an Al dimer, LDOS has a high intensity in the conduction band region, which cannot be seen on the Si(0 0 1)2 × 1 surface. This tendency is observed in STS measurements as well. The possibility for a microelementary analysis is presented by applying this method to other metal atoms on the Si surface. Furthermore, it is pointed out that STS measurements should be always performed at the same tip-sample separation to obtain reproducible STS spectrums.     

Jitter Accumulation for Periodic Pattern Signals

It is important to accurately evaluate and reduce jitter accumulation in long-haul digital repeatered lines. Jitter accumulation caused by random pattern signals has already been analyzed. However, periodic pattern signals such as pseudorandom signals are usually used to measure jitter accumulation. This paper describes the difference between the jitter accumulation for both signals and the necessary conditions to accurately estimate jitter accumulation for random pattern signals by using periodic pattern signals. First, it is shown theoretically that systematic jitter for periodic signals saturates, showing a ripple pattern. The limit of increase is determined by the ratio of tank bandwidth and pattern repetition frequency. Up to a certain number of regenerators determined by the ratio, systematic jitter increases in rough proportion to thesqrt{N}slope. It is also shown that the equation to estimate random pattern jitter accumulation is determined by the measured value for periodic pattern signals. Second, jitter characteristics are simulated by optical signal circulating experiments. The results are in agreement with the analysis. In addition, the reduction effects on periodic signal jitter accumulation caused by timing signal delay and nonlinearity of the limiter in the timing circuit are shown.     

An attempt to add biological functions by genetic engineering in order to produce high-performance bioreactor cells for hybrid artificial liver: transfection of glutamine synthetase into Chinese hamster ovary (CHO) cell

Ureteral triplication is a rare congenital anomaly of the upper urinary tract. It is reported to be associated with an increased incidence of congenital anomalies as well as a predisposition to infection and calculus formation. We report a case of type 1 variant of ureteral triplication associated with vesicoureteral reflux into lower and mid pole ureters in a solitary kidney. To our knowledge ureteral triplication in a solitary kidney has not been described previously.     

A majority-logic device using an irreversible single-electron box

We describe a majority-logic gate device suitable for use in developing single-electron integrated circuits. The device consists of a capacitor array for input summation and an irreversible single-electron box for threshold operation. It accepts three binary inputs and produces a corresponding output, a complementary majority-logic output, by using the change in its tunneling threshold caused by the input signals; it produces a logical 1 output if two or three of the inputs are logical 0 and a logical 0 output if two or three of the inputs are logical 1. We combined several of these gate devices to form subsystems, a shift register and a full adder, and confirmed their operation by computer simulation. The gate device is simple in structure and powerful in terms of implementing digital functions with a small number of devices. These superior features will enable the device to contribute to the development of single-electron integrated circuits.     

A 20-ps Si bipolar IC using advanced super self-aligned processtechnology with collector ion implantation

A super self-aligned process technology, SST-1B, which is an advanced version of the previously proposed SST-1A in high-speed Si bipolar LSIs is discussed. A selectively ion-implanted collector (SIC) process and bird's-beak-free isolation process are utilized. The SIC process is designed to improve shallow base-collector profiles in the intrinsic region. It reduces base width and intrinsic base resistance, and suppresses the base push-out effect (Kirk's effect) in high-current operations. The SIC profile is easily controlled by 150-200 keV phosphorous ion implantation at the base-collector junction. Using these processes, SST-1B has achieved a high cutoff frequency of 21.1 to 25.7 GHz and a fast switching delay of 20.5 ps/G for nonthreshold logic and 34.1 ps/G for emitter-coupled logic. SST-1B has potential applications to 50-ps/G logic LSIs and 10-GHz SSIs. Device simulation indicates that it is possible to achieve a cutoff frequency of 40-50 GHz in a future scaled-down Si bipolar transistor with a 40-nm base and graded collector     

A 146-mm/sup 2/ 8-gb multi-level NAND flash memory with 70-nm CMOS technology

An 8-Gb multi-level NAND Flash memory with 4-level programmed cells has been developed successfully. The cost-effective small chip has been fabricated in 70-nm CMOS technology. To decrease the chip size, a one-sided pad arrangement with compacted core architecture and a block address expansion scheme without block redundancy replacement have been introduced. With these methods, the chip size has been reduced to 146 mm/sup 2/, which is 4.9% smaller than the conventional chip. In terms of performance, the program throughput reaches 6 MB/s at 4-KB page operation, which is significantly faster than previously reported and very competitive with binary Flash memories. This high performance has been achieved by the combination of the multi-level cell (MLC) programming with write caches and with the program voltage compensation technique for neighboring select transistors. The read throughput reaches 60 MB/s using 16I/O configuration.     

Elevated Expression of CCN3 in Articular Cartilage Induces Osteoarthritis in Hip Joints Irrespective of Age and Weight Bearing

Osteoarthritis (OA) occurs not only in the knee but also in peripheral joints throughout the whole body. Previously, we have shown that the expression of cellular communication network factor 3 (CCN3), a matricellular protein, increases with age in knee articular cartilage, and the misexpression of CCN3 in cartilage induces senescence-associated secretory phenotype (SASP) factors, indicating that CCN3 promotes cartilage senescence. Here, we investigated the correlation between CCN3 expression and OA degenerative changes, principally in human femoral head cartilage. Human femoral heads obtained from patients who received total hip arthroplasty were categorized into OA and femoral neck fracture (normal) groups without significant age differences. Gene expression analysis of RNA obtained from femoral head cartilage revealed that CCN3 and MMP-13 expression in the non-weight-bearing part was significantly higher in the OA group than in the normal group, whereas the weight-bearing OA parts and normal cartilage showed no significant differences in the expression of these genes. The expression of COL10A1, however, was significantly higher in weight-bearing OA parts compared with normal weight-bearing parts, and was also higher in weight-bearing parts compared with non-weight-bearing parts in the OA group. In contrast, OA primary chondrocytes from weight-bearing parts showed higher expression of CCN3, p16, ADAMTS4, and IL-1β than chondrocytes from the corresponding normal group, and higher ADAMTS4 and IL-1β in the non-weight-bearing part compared with the corresponding normal group. Acan expression was significantly lower in the non-weight-bearing group in OA primary chondrocytes than in the corresponding normal chondrocytes. The expression level of CCN3 did not show significant differences between the weight-bearing part and non-weight-bearing part in both OA and normal primary chondrocytes. Immunohistochemical analysis showed accumulated CCN3 and aggrecan neoepitope staining in both the weight-bearing part and non-weight-bearing part in the OA group compared with the normal group. The CCN3 expression level in cartilage had a positive correlation with the Mankin score. X-ray analysis of cartilage-specific CCN3 overexpression mice (Tg) revealed deformation of the femoral and humeral head in the early stage, and immunohistochemical analysis showed accumulated aggrecan neoepitope staining as well as CCN3 staining and the roughening of the joint surface in Tg femoral and humeral heads. Primary chondrocytes from the Tg femoral head showed enhanced expression of Ccn3, Adamts5, p16, Il-6, and Tnfα, and decreased expression of Col2a1 and -an. These findings indicate a correlation between OA degenerative changes and the expression of CCN3, irrespective of age and mechanical loading. Furthermore, the Mankin score indicates that the expression level of Ccn3 correlates with the progression of OA.