Fourier-transform speckle profilometry: three-dimensional shape measurements of diffuse objects with large height steps and/or spatially isolated surfaces

An interferometric technique for automated profilometry of diffuse objects has been proposed. It is based on the Fourier-fringe analysis of spatiotemporal specklegrams produced by a wavelength-shift interferometer with a laser diode as a frequency-tunable light source. Unlike conventional moiré techniques the proposed technique permits the objects to have discontinuous height steps and/or surfaces spatially isolated from one another. Experimental results are presented that demonstrate the validity of the principle.     

Conductivity of the one-dimensional quantum sine-gordon system (g 2 = 4π) with impurities

We have considered the behavior of the conductivity or the dielectric function of the one-dimensional (1-D) quantum sine-Gordon system (g² = 4) for two models of impurities. We have used a Fermi-Bose relation and a self consistent t-matrix approximation. As for the conductivity at zero temperature, it appears when the concentration of impurities becomes larger than the critical concentration of impurities. It shows the linear increase near the critical concentration. As for the dielectric constant, its behavior is model dependent. We have numerically calculated the frequency dependence of the conductivity at zero temperature. The real part shows the second order increase near the critical frequency. The imaginary part shows the linear decrease from the origin.     

Interpretation of reflection and transmission spectra for thin films: transmission

The optical behavior of a thin film, that is, peak positions and intensities, is discussed for transmission under a thin-film approximation. The infrared transmission spectra of thin films, both standing films and those on dielectric substrates, are simulated for s and p polarization at various angles of incidence. For spectral simulation, the matrix method is used in conjunction with noise-free complex refractive indices based on the dispersion theory. The peak positions in the simulated spectra are compared with transverse optic and longitudinal optic frequencies based on the macroscopic theory. The simulated peak intensities for the standing films are compared with the prediction based on the thin-film approximation. Furthermore, it is found from the spectral simulation for thin films on dielectric substrates that the peak intensity for a thin film may depend on the thickness and refractive index of the substrate.     

Observation of enhanced backscattering from a plane mirror viewed through polymer-film-dispersed liquid crystals

We report experimental results on enhanced backscattering from a plane mirror that is viewed through polymer-film-dispersed nematic liquid crystals. The distribution of the averaged intensity of the light reflected from the mirror placed behind the polymer film is investigated with an image-processing system when a Gaussian beam wave is incident. The enhanced light peak is observed in an incident beam direction, the result of which is predicted by a theory based on the circular Gaussian statistic random-phase-screen model. We pay attention to the enhancement dependence on parameters such as the distance between the polymer film and the flat mirror. The observed result is similar to a previous study by Jakeman et al. in which a random diffusive glass plate was used as a random-phase screen [J. Phys. D 21, 32 (1988)].     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Experimental and clinical study on intraoperative local infusion chemotherapy (ILIC) for advanced gastric carcinoma

An intensive chemotherapy combined with surgery, termed "intraoperative local infusion chemotherapy (ILIC)", was devised. The ILIC procedure is to infuse 50 mg of cisplatin through the feeding artery to the tumor, which has been isolated from blood flow by clamping the stomach and blood vessels, before radical surgery. An experiment in dogs showed considerable free Pt transfer into thoracic lymph after ILIC. Sum total Pt in the thoracic lymph after ILIC (294.5 micrograms/3 h) was 4.3 times that after IV administration (68.3 micrograms/3 h). In ILIC, AUC of free Pt in the thoracic lymph was about 5.8 times that in peripheral blood. ILIC was applied in 24 advanced gastric cancer patients, consisting of 6, 2, 4 and 12 in pTNM stage II, IIIA, IIIB and IV, respectively. Pt concentration of the tissues was high in the tumor (23.22 micrograms/g) and the regional lymph nodes (2.95 micrograms/g) compared to that in the serum (0.45 microgram/ml). The survival rate (Kaplan-Meier) in the ILIC patients was significantly higher than that of control patients (matched pair method) from among patients treated by surgery alone. No fatal complications were encountered in any patient treated by ILIC.     

Negative emotion recognition using multimodal physiological signals for advanced driver assistance systems

Artificial Life and Robotics - Recent advanced driver assistance systems’ (ADASs) control cars to avoid accidents, but few of them consider driver’s comfort. To realize comfortable...     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

Probabilistic calibration of discrete element simulations using the sequential quasi-Monte Carlo filter

The calibration of discrete element method (DEM) simulations is typically accomplished in a trial-and-error manner. It generally lacks objectivity and is filled with uncertainties. To deal with these issues, the sequential quasi-Monte Carlo (SQMC) filter is employed as a novel approach to calibrating the DEM models of granular materials. Within the sequential Bayesian framework, the posterior probability density functions (PDFs) of micromechanical parameters, conditioned to the experimentally obtained stress–strain behavior of granular soils, are approximated by independent model trajectories. In this work, two different contact laws are employed in DEM simulations and a granular soil specimen is modeled as polydisperse packing using various numbers of spherical grains. Knowing the evolution of physical states of the material, the proposed probabilistic calibration method can recursively update the posterior PDFs in a five-dimensional parameter space based on the Bayes’ rule. Both the identified parameters and posterior PDFs are analyzed to understand the effect of grain configuration and loading conditions. Numerical predictions using parameter sets with the highest posterior probabilities agree well with the experimental results. The advantage of the SQMC filter lies in the estimation of posterior PDFs, from which the robustness of the selected contact laws, the uncertainties of the micromechanical parameters and their interactions are all analyzed. The micro–macro correlations, which are byproducts of the probabilistic calibration, are extracted to provide insights into the multiscale mechanics of dense granular materials.     

Differential expression of laminin receptors in human hepatocellular carcinoma

Distortion-product otoacoustic emissions (DPOAEs) have been shown to be ideally sensitive to interruptions of the cochlear blood flow. However, a 15- to 30-second latency typically occurs between cessation of circulation and measurable DPOAE level changes. DPOAEs can also be characterized by phase measures. The aim of the present study was to determine in 10 rabbits the effects on DPOAE phase of repetitively compressing the internal auditory artery. In contrast to the delays measured by DPOAE level, phase changes were detected 1 to 5 seconds after internal auditory artery compression. These data suggest that the essentially "real time" monitoring of cochlear function with DPOAE phase can be used to ensure hearing preservation during surgery involving the porus acousticus and skull base.