Scattering of Electromagnetic Waves by a Coated Nihility Cylinder

An analytical solution for the scattering of electromagnetic plane waves from an infinitely long nihility cylinder, coated with a double positive (DPS), double negative (DNG), epsilon negative (ENG), or mu negative (MNG) layer of uniform thickness is presented. The solution is determined by solving the scalar wave equation in the cylindrical coordinates, for different regions and applying the appropriate boundary conditions at the interfaces. Both TM and TE polarizations as incident plane have been considered in the analysis. Comparison of behaviors of a coated nihility cylinder with a coated PEC cylinder has been made. It is noted that two situations are more closer for DNG coating as compared to DPS coating.     

Geometrical Characteristics and Surface Polarity of Inclined Crystallographic Planes of the Wurtzite and Zincblende Structures

Inclined crystallographic planes of the wurtzite structure were investigated in comparison with the zincblende structure in terms of surface geometry characteristics. The ball–stick model indicates that the semipolar surface possesses a surface polarity resembling the anion polarity, which agrees with the common experimental observations of epitaxial growth preference for the cation-polarity surface over the surface. The wurtzite surface was found to share geometrical similarities with the zincblende {100} surface uniquely among the possible semipolar planes. This finding encourages epitaxial growth on the plane of wurtzite semiconductors, e.g., GaN, with the potential of avoiding atomic step formations typically associated with off-axis crystallographic planes.     

A pilot-assisted non-Cyclic Prefixed MIMO-SCFDE system

A non-Cyclic Prefixed Multiple-Input Multiple-Output Single-Carrier Frequency-Domain Equalization (non-CP MIMO-SCFDE) system based on a recursive algorithm of Joint Channel Es- timation and Data Detection (recursive-JCEDD) is proposed in this paper. Unlike the traditional CP MIMO-SCFDE system, the transmitted block of the proposed system is designed in the way that block-type pilot sequences and Single-Carrier (SC) information sequences have been arranged alter- nately without any cyclic prefix before each ...     

Cellular Controlled Short-Range Communication for Cooperative P2P Networking

This article advocates a novel communication architecture and associated collaborative framework for future wireless communication systems. In contrast to the dominating cellular architecture and the upcoming peer-to-peer architecture, the new approach envisions a cellular controlled short-range communication network among cooperating mobile and wireless devices. The role of the mobile device will change, from being an agnostic entity in respect to the surrounding world to a cognitive device. This cognitive device is capable of being aware of the neighboring devices as well as on the possibility to establish cooperation with them. The novel architecture together with several possible cooperative strategies will bring clear benefits for the network and service providers, mobile device manufacturers and also end users.

Downlink Capacity Analysis of Collaborative Crossed Timeslots in CDMA TDD Systems

Traffic asymmetry between uplink and downlink is expected to be a remarkable 3G characteristic in cellular mobile multimedia communications. CDMA system with TDD is a good solution to this traffic asymmetry. However, the level of traffic asymmetry may be significantly different from a cell to another cell. To tackle this problem and to support the traffic hot spot, crossed slots are examined. The use of crossed slots is restricted within a certain range of a cell by investigating the inter-cell interference and the maximum planned load factor. We examine the radius of inner zone and discuss the capacity of downlink crossed slots for various neighbor cell environments. Computational results show that the capacity increase in the target cell is outstanding by reducing the service range of neighbor cells. When all six neighbors reduce their service range by 20%, the capacity at target cell crossed slot is increased by 35%. Monte Carlo simulation is performed with large scale fading to verify the numerical analysis.

Thermoelectric Effect Spectroscopy and Photoluminescence of High-Resistivity CdTe:In

Thermoelectric effect spectroscopy and photoluminescence techniques were used to study the defect levels in samples from three crystals of CdTe:In grown by the vertical gradient freeze method. The main goal of the investigation was to study defects, which strongly trap charge carriers or act as recombination centers in order to eliminate them from the technological process. The main difference among detecting and non-detecting samples was the absence of electron traps with a very high capture cross-section and energy 0.6 eV to 0.7 eV, which act as lifetime killers even at low concentrations. Recently published ab initio calculations show a complex of Te antisite and Cd vacancy within this energy range.     

A Policy-based Approach for Reconfiguration Management and Enforcement in Autonomic Communication Systems

This paper presents an overview of the policy-based reconfiguration management and enforcement for autonomic communication system platform (Pre-meacs). In contrast to existing management approaches, which require static priori policy configurations, policies are created dynamically. The proposed Pre-meacs framework creates new policies at runtime in response to the changing requirements. A hierarchical policy model is used to refine users and administrators’ high-level goals into low-level objectives. The new approach ensures the success of the reconfiguration through monitoring feedback. The main components of Pre-meacs framework for policy creation, storage, evaluation and enforcement are presented, and the procedures of Pre-meacs in networks reconfiguration management are also demonstrated. Illustrative example demonstrates the performance of the proposed framework.

Programmable SiGe BiCMOS low-pass filter for a multicarrier WCDMA base-station receiver

SiGe BiCMOS low-pass filter for a multicarrier WCDMA base-station receiver is described in this paper. The 4th-order Chebyshev filter with a 0.1-dB passband ripple is designed to drive a high-resolution A/D converter. The −3-dB frequency of the implemented filter can be programmed to four different bandwidths: 2.5, 5, 7.5, and 10 MHz depending on the number of received WCDMA channels. The filter achieves +9.7-dBV in-band IIP3, +20-dBV out-of-band IIP3, and 8.5-nV/√Hz input-referred noise density with 10-MHz bandwidth. The circuit uses a 2.5 V supply and has been fabricated in a 0.25-μm SiGe BiCMOS process.     

Multiconstrained QoS multipath routing in wireless sensor networks

Sensor nodes are densely deployed to accomplish various applications because of the inexpensive cost and small size. Depending on different applications, the traffic in the wireless sensor networks may be mixed with time-sensitive packets and reliability-demanding packets. Therefore, QoS routing is an important issue in wireless sensor networks. Our goal is to provide soft-QoS to different packets as path information is not readily available in wireless networks. In this paper, we utilize the multiple paths between the source and sink pairs for QoS provisioning. Unlike E2E QoS schemes, soft-QoS mapped into links on a path is provided based on local link state information. By the estimation and approximation of path quality, traditional NP-complete QoS problem can be transformed to a modest problem. The idea is to formulate the optimization problem as a probabilistic programming, then based on some approximation technique, we convert it into a deterministic linear programming, which is much easier and convenient to solve. More importantly, the resulting solution is also one to the original probabilistic programming. Simulation results demonstrate the effectiveness of our approach. This work was supported in part by the U.S. National Science Foundation under grant DBI-0529012, the National Science Foundation Faculty Early Career Development Award under grant ANI-0093241 and the Office of Naval Research under Young Investigator Award N000140210464. Xiaoxia Huang received her BS and MS in the Electrical Engineering from Huazhong University of Science and Technology in 2000 and 2002, respectively. She is completing her Ph.D. degree in the Department of Electrical and Computer Engineering at the University of Florida. Her research interests include mobile computing, QoS and routing in wireless ad hoc networks and wireless sensor networks. Yuguang Fang received a Ph.D. degree in Systems Engineering from Case Western Reserve University in January 1994 and a Ph.D degree in Electrical Engineering from Boston University in May 1997. He was an assistant professor in the Department of Electrical and Computer Engineering at New Jersey Institute of Technology from July 1998 to May 2000. He then joined the Department of Electrical and Computer Engineering at University of Florida in May 2000 as an assistant professor, got an early promotion to an associate professor with tenure in August 2003 and to a full professor in August 2005. He holds a University of Florida Research Foundation (UFRF) Professorship from 2006 to 2009. He has published over 200 papers in refereed professional journals and conferences. He received the National Science Foundation Faculty Early Career Award in 2001 and the Office of Naval Research Young Investigator Award in 2002. He has served on several editorial boards of technical journals including IEEE Transactions on Communications, IEEE Transactions on Wireless Communications, IEEE Transactions on Mobile Computing and ACM Wireless Networks. He have also been activitely participating in professional conference organizations such as serving as The Steering Committee Co-Chair for QShine, the Technical Program Vice-Chair for IEEE INFOCOM’2005, Technical Program Symposium Co-Chair for IEEE Globecom’2004, and a member of Technical Program Committee for IEEE INFOCOM (1998, 2000, 2003–2007).     

Theoretical Study of Millimeter Wave Harmonic Oscillator Stabilized with a Transmission Cavity

An equivalent circuit model of millimeter wave second harmonic oscillator stabilized with a transmission cavity has been proposed for constructing analytical formulations between performance parameters of the oscillator and parameters of the circuit. The model consists of an equivalent circuit of fundamental wave and that of second harmonic wave. Each of the circuits comprises circuit models of main cavity, transmission waveguide, and transmission cavity. Absorbing material placed between the transmission waveguide and the transmission cavity can suppress additional resonances originated from transmission cavity. The behavior of the second harmonic oscillator can be effectively described by the circuit model. Furthermore, based on this model, mechanical tuning characteristics have been studied at first, and then analytical formulas for quality factor and efficiency depending on circuit parameters have been derived. The circuit parameters can be conveniently extracted by electromagnetic field simulation. Hence the formulas exhibit both compact form and enough accuracy. Thereafter, general rules of performance parameters varying with circuit parameters have been deduced for the harmonic oscillators. Then some design considerations have been derived according to the corresponding analysis. The equivalent circuit model is useful for designing and adjusting millimeter wave second harmonic stabilizing oscillator with a transmission cavity.