Generating hydrogen-rich fuel-cell feeds from dimethyl ether (DME) using physical mixtures of a commercial Cu/Zn/Al2O3 catalyst and several solid–acid catalysts

Homogeneous physical mixtures containing a commercial Cu/ZnO/Al₂O₃ catalyst and a solid–acid catalyst were used to examine the acidity effects on dimethyl ether hydrolysis and their subsequent effects on dimethyl ether steam reforming (DME-SR). The acid catalysts used were zeolites Y [Si/Al = 2.5 and 15: denoted Y(Si/Al)], ZSM-5 [Si/Al = 15, 25, 40, and 140: denoted Z(Si/Al)] and other conventional catalyst supports (ZrO₂, and γ-Al₂O₃). The homogeneous physical mixtures contained equal amounts, by volume, of the solid–acid catalyst and the commercial Cu/ZnO/Al₂O₃ catalyst (BASF K3-110, denoted as K3). The steam reforming of dimethyl ether was carried out in an isothermal packed-bed reactor at ambient pressure.

The most promising physical mixtures for the low-temperature production of hydrogen from DME contained ZSM-5 as the solid–acid catalyst, with hydrogen yields exceeding 90% (T = 275 °C, S/C = 1.5, τ = 1.0 s and P = 0.78 atm) and hydrogen selectivities exceeding 94%, comparable to those observed for methanol steam reforming (MeOH-SR) over BASF K3-110, with values equaling 95% and 99%, respectively (T = 225 °C, S/C = 1.0, τ = 1.0 s and P = 0.78 atm). Large production rates of hydrogen were directly related to the type of acid catalyst used. The hydrogen production activity trend as a function of physical mixture was

     

Extension of Master Sintering Curve Theory to Organic Decomposition

The ability to predict and control organic decomposition of a material under arbitrary thermal treatments is one of the main objectives of thermogravimetric studies. The development of this ability provides significant potential to ensure reliability and reproducibility for a given processing method and can be used in planning optimized thermal treatment strategies. Based on this report, the master sintering curve theory has been successfully extended to similar kinetically controlled phenomena. The theory has been applied to organic decomposition reaction kinetics to develop a master organic decomposition curve. The fundamental kinetics are assumed to be governed by an Arrhenius-type reaction rate, making master sintering and decomposition curves analogous to one another. The formulation and construction of a master decomposition curve are given in this paper. Simultaneous thermogravimetric and differential thermal analysis of a low-temperature co-fire glass/ceramic dielectric tape (Dupont 951 Green Tape^TM) is analyzed and used to demonstrate this new concept. The results reveal two independent organic decomposition reactions, the first occurring at ≈245°C and the second at ≈365°C. The analysis is used to produce a master decomposition curve and to calculate the activation energy for these reactions, at 86±6 and 142±4 kJ/mol, respectively. In addition, the weight loss of product and the rate of decomposition can be predicted under varying thermal paths (time–temperature trajectories) following a minimal set of preliminary experiments.     

Substrate-mediated interactions and intermolecular forces between molecules adsorbed on surfaces

Adsorbate interactions and reactions on metal surfaces have been investigated using scanning tunneling microscopy. The manners in which adsorbates perturb the surface electronic structure in their vicinity are discussed. The effects these perturbations have on other molecules are shown to be important in overlayer growth. Interactions of molecules with surface steps are addressed, and each molecule's electron affinity is shown to dictate its adsorption sites at step edges. Standing waves emanating from steps are demonstrated to effect transient molecular adsorption up to 40 A away from the step edge. Halobenzene derivatives are used to demonstrate how the surface is important in aligning reactive intermediates.     

Analysis of impersonation attacks on systems using RF fingerprinting and low-end receivers

Recently, physical layer security commonly known as Radio Frequency (RF) fingerprinting has been proposed to provide an additional layer of security for wireless devices. A unique RF fingerprint can be used to establish the identity of a specific wireless device in order to prevent masquerading/impersonation attacks. In the literature, the performance of RF fingerprinting techniques is typically assessed using high-end (expensive) receiver hardware. However, in most practical situations receivers will not be high-end and will suffer from device specific impairments which affect the RF fingerprinting process. This paper evaluates the accuracy of RF fingerprinting employing low-end receivers. The vulnerability to an impersonation attack is assessed for a modulation-based RF fingerprinting system employing low-end commodity hardware (by legitimate and malicious users alike). Our results suggest that receiver impairment effectively decreases the success rate of impersonation attack on RF fingerprinting. In addition, the success rate of impersonation attack is receiver dependent.     

Foresight for a responsible future with ICT

The ACM Code of Ethics asserts that computing professionals have an ethical responsibility to minimize the negative consequences of information and communication technologies (ICT). Negative consequences are rarely intended, but they can often be foreseen with careful sociotechnical analysis in advance of system building. Motivated by an interest in extremely complex sociotechnical contexts (e.g., mortgage lending and automated trading) where ICT appears to be having negative consequences in addition to many benefits, this paper identifies and evaluates future-oriented problem analysis and solution design tools in three potentially relevant literatures: 1) ICT ethics, 2) environmental sustainability, and 3) technology hazards. Several promising future-oriented technology analysis techniques (e.g., anticipatory technology ethics, technology roadmapping, morphological analysis, and control structure analysis) were found and are discussed in this paper, but much work remains to be done to customize them, integrate them, and codify them for use in education and high-quality IS research on very complex sociotechnical contexts like the global financial network.     

On detecting co-resident cloud instances using network flow watermarking techniques

Virtualization is the cornerstone of the developing third-party compute industry, allowing cloud providers to instantiate multiple virtual machines (VMs) on a single set of physical resources. Customers utilize cloud resources alongside unknown and untrusted parties, creating the co-resident threat—unless perfect isolation is provided by the virtual hypervisor, there exists the possibility for unauthorized access to sensitive customer information through the exploitation of covert side channels. This paper presents co-resident watermarking, a traffic analysis attack that allows a malicious co-resident VM to inject a watermark signature into the network flow of a target instance. This watermark can be used to exfiltrate and broadcast co-residency data from the physical machine, compromising isolation without reliance on internal side channels. As a result, our approach is difficult to defend against without costly underutilization of the physical machine. We evaluate co-resident watermarkingunder a large variety of conditions, system loads and hardware configurations, from a local laboratory environment to production cloud environments (Futuregrid and the University of Oregon’s ACISS). We demonstrate the ability to initiate a covert channel of 4 bits per second, and we can confirm co-residency with a target VM instance in $<$ 10 s. We also show that passive load measurement of the target and subsequent behavior profiling is possible with this attack. We go on to consider the detectability of co-resident watermarking, extending our scheme to create a subtler watermarking attack by imitating legitimate cloud customer behavior. Our investigation demonstrates the need for the careful design of hardware to be used in the cloud.     

Designing for video: investigating the contextual cues within viewing situations

The viewing of video increasingly occurs in a wide range of public and private environments via a range of static and mobile devices. The proliferation of content on demand and the diversity of the viewing situations means that delivery systems can play a key role in introducing audiences to contextually relevant content of interest whilst maximising the viewing experience for individual viewers. However, for video delivery systems to do this, they need to take into account the diversity of the situations where video is consumed, and the differing viewing experiences that users desire to create within them. This requires an ability to identify different contextual viewing situations as perceived by users. This paper presents the results from a detailed, multi-method, user-centred field study with 11 UK-based users of video-based content. Following a review of the literature (to identify viewing situations of interest on which to focus), data collection was conducted comprising observation, diaries, interviews and self-captured video. Insights were gained into whether and how users choose to engage with content in different public and private spaces. The results identified and validated a set of contextual cues that characterise distinctive viewing situations. Four archetypical viewing situations were identified: ‘quality time’, ‘opportunistic planning’, ‘sharing space but not content’ and ‘opportunistic self-indulgence’. These can be differentiated in terms of key contextual factors: solitary/shared experiences, public/private spaces and temporal characteristics. The presence of clear contextual cues provides the opportunity for video delivery systems to better tailor content and format to the viewing situation or additionally augment video services through social media in order to provide specific experiences sensitive to both temporal and physical contexts.     

BUBBLE MEASUREMENTS IN A GAS-LIQUID JET

Measurements have been carried out in the developing and fully developed regions of a free, axisymmetric, isothermal, air-water, bubbly jet. Three experiments have been conducted at a fixed jet-exit Reynolds number and gas superficial velocity using three different bubble injector assemblies producing bubbles of moderately different average sizes and size distributions. The volume fraction of the bubbly jet flow examined in this study is low and the resulting dispersed flow is dilute. A one-component Phase-Doppler Velocimetry system has been employed to measure bubble size and velocity non-intrusively. Visual data collected simultaneously with the light-scattering measurements were analyzed with the aid of image processing and used to verify the trends portrayed by the light-scattering measurements and to determine average bubble size. Our measurements show that, even in the dilute flow examined here, differences in initial bubble-size and size distribution can influence the RMS velocity fluctuations of the bubbles, particularly in the jet development region. The average bubble velocities are less sensitive. Evidence that the development pattern of the jet near the exit is affected by the presence of the bubbles is also presented. Near the exit of the jet, bubbles are shown to be ejected laterally outside the jet due to the significant lift force caused by the high velocity gradient in the axisymmetric shear layer. The observed sensitivity of the bubble flow to size-related parameters and initial conditions in this dilute case, indicates that discrepancies in previous measurements of dispersed, bubbly flows could be attributed to different size characteristics and/or initial conditions.     

Analysis of the Insect OS-D-Like Gene Family

Insect OS-D-like proteins, also known as chemosensory (CSP) or sensory appendage proteins (SAP), are broadly expressed in various insect tissues, where they are thought to bind short to medium chain length fatty acids and their derivatives. Although their specific function remains uncertain, OS-D-like members have been isolated from sensory organs (including the sensillum lymph in some cases), and a role in olfaction similar to that of the insect odorant binding proteins (OBP) has been suggested for some. We have identified 15 new OS-D-like sequences: four from cDNA clones described herein and 11 from sequence databases. The os-d-like genes from the Anopheles gambiae, Apis mellifera, Drosophila melanogaster, and Drosophila pseudoobscura genomes typically have single, small introns with a conserved splice site. Together with all family members entered on GenBank, a total of 70 OS-D-like proteins, representing the insect orders Diptera, Dictyoptera, Hymenoptera, Lepidoptera, Orthoptera, and Phasmatodea, were analyzed. A neighbor joining distance phenogram identified several protein similarity classes that were characterized by highly conserved sequence motifs, including (A) N-terminal YTTKYDN(V/I)(N/D)(L/V)DEIL, (B) central DGKELKXX(I/L)PDAL, and (C) C-terminal KYDP. In contrast, three similarity classes were characterized by their diversion from these conserved motifs. The functional importance of conserved amino acid residues is discussed in relation to the crystal and NMR structures of MbraCSPA6.     

An axisymmetric model for thread forming in polycarbonate and polypropylene screw and boss fasteners

Plastic boss and screw fasteners are an economical means of securing automotive components, such as instrument or body panels. However, new materials and/or suboptimal design present challenges to the boss/screw effectiveness. Failure of a boss/screw can result is loss of functional performance or increased squeak and rattle. Failure is often controlled by what occurs during the initial thread‐forming process. Thus, the goal of this paper is to develop an FEA model to elucidate the thread‐forming process so that we can facilitate subsequent design and/or process optimization, and understand potential failure modes. The FEA must accommodate nonlinear couplings, such as large strain and heat transfer. Heat generation is present in the forms of interfacial shear heating and plastic work associated with the large deformation of the interface between the boss and screw. Strain rate‐dependent materials are included using the Eyring theory for plastic flow of polymeric materials. Results of the model are presented and compared to experimentally determined torque curves and temperatures. Polym. Eng. Sci. 44:1498–1508, 2004. © 2004 Society of Plastics Engineers.