Preparation of lead (Pb) X-ray fluorescence reference materials for the EPA Pb monitoring program and the IMPROVE network using an aerosol deposition method

X-ray fluorescence (XRF) is a commonly used analytical method to quantify lead (Pb), a toxic element, in atmospheric aerosol. The commercially available reference materials used for calibrating XRF do not mimic the concentrations and filter materials of particulate matter (PM) monitoring networks. In this study, we described an aerosol deposition method to generate Pb reference materials (RMs) over a range of concentrations to serve several purposes for the US Environmental Protection Agency (EPA) and Interagency Monitoring of PROtected Visual Environments (IMPROVE) monitoring networks including laboratory auditing, federal equivalency method evaluation, and calibration and quality control of XRF instruments. The RMs were generated using a laboratory-built aerosol chamber equipped with a federal reference sampler at concentration levels ranging from 0.0125 to 0.70 μg/m³. XRF analysis at UC Davis was demonstrated to be equivalent to a US and EU reference method, inductively coupled plasma—mass spectrometry (ICP-MS), for measuring Pb on RMs following a methodology described in the United States and international standards. The Pb concentrations on subsets of the RMs were verified by three other XRF laboratories with different analyzers and/or quantification methods and were shown to be equivalent to the UC Davis XRF analysis. The generated RMs were demonstrated to have short and long-term stability, satisfying an additional requirement of reference materials.

Copyright © 2016 American Association for Aerosol Research     

Polyolefin elastomer grafted unsaturated hindered phenol esters: synthesis and antioxidant behavior

Monomeric antioxidants are synthesized from esterification of 3,5-di-tert-butyl-4-hydroxybenzoic acid and 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid with unsaturated fatty alcohols. The antioxidant activity is evaluated both in blending and radical grafting processes. The effect of chain length and phenolic group is investigated on efficiency of antioxidants. It is demonstrated that the esters of 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid exhibit significantly longer induction time. The results of radical grafting reaction shows synthesized antioxidants can be successfully grafted onto polymer chains and the phenolic moiety is functional after extraction process, while pure and commercially stabilized samples are degraded instantaneously. Also, different initiator systems are utilized to enhance the extent of grafting. Among MEK, DCP, and DHBP peroxides, DHBP can be more effective in increasing the antioxidant grafted onto polymer. In addition, possibility of rising in graft content is investigated in presence of redox initiator. Using this approach, polymer-bound antioxidant with prolonged thermal stability can be achieved.     

Effects of dynamic vulcanization on tensile,morphological, and swelling properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(Kenaf core powder) composites

The effects of dynamic vulcanization on properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(kenaf core powder) composite were studied. Tensile properties indicated that the strength, elongation at break, and Young's modulus of the composites exhibited an increase for samples with dynamic vulcanization. Morphological analysis using scanning electron microscopy showed the interaction between ENR and PVC. There was no bonding between kenaf core powder and the PVC/ENR matrix owing to the different polarity of both components. Filler agglomerates increased, which leads to an increase of filler‐filler interaction and poor dispersion. Furthermore, swelling index indicated that the composite with dynamic vulcanization shows lower absorption of tolune compared with composites without dynamic vulcanization. J. VINYL ADDIT. TECHNOL., 22:206–212, 2016. © 2014 Society of Plastics Engineers     

Gate All Around Dopingless Nanotube TFET Biosensor with Si0.5Ge0.5 – Based Source

Silicon - Through this paper, we discuss how Tunnel Field Effect Transistors can be utilized for the detection of biomaterials hence acting as a biosensor. The device proposed is a 3-D Doping less...     

Regenerated cellulose nanocomposites reinforced with exfoliated graphite nanosheets using BMIMCL ionic liquid

Green nanocomposites of regenerated cellulose/exfoliated graphite nanosheets films with low nanofiller loadings were prepared using environmentally benign 1-butyl-3-methylimidazolium chloride (BMIMCl) ionic liquid. X-ray diffraction revealed well developed intercalated nanocomposites. The tensile strength and Young's modulus of the prepared nanocomposites were increased by 97.5% and 172% respectively when 0.75 wt.% and 1 wt.% exfoliated graphite nanosheets were added. The results were validated using the Halpin–Tsai model. The exfoliated graphite nanosheets were unidirectionally aligned in the regenerated cellulose parallel to the surface of the nanocomposites as revealed by transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). Also, the TEM and FESEM revealed uniform dispersion of the exfoliated graphite nanosheets and good interaction between the nanofillers and the matrix. The addition of the exfoliated graphite nanosheets enhanced the thermal stability and reduced the water absorption and diffusivity of the nanocomposites.     

Single-electron transfer living radical copolymerization of SWCNT-g-PMMA via graft from approach

The sidewall functionalization of single-walled carbon nanotubes (SWCNTs) was established by poly (methyl methacrylate) (PMMA) using controlled radical polymerization (CRP) method. A bromide functionalized SWCNT (SWCNT-Br) has been used as an initiator for the synthesis of SWCNT-graft-PMMA (SWCNT-g-PMMA). The efficiency of the sacrificial initiator (S) was monitored during the polymerization process. The obtained polymers possess a uniform distribution of molecular weight with a lower polydispersity index of 1.36. The SWCNTs-based initiator acts as an efficient medium for the controlled growth of polymer on the SWCNTs surfaces. The presence of bimodal gel permeation chromatographic (GPC) curve for the SWCNT-g-PMMA(S) obtained through sacrificial initiator (S) confirms uncontrolled behavior. However, the clear sharp peak for SWCNT-g-PMMA obtained without sacrificial initiator shows its well-controlled process of polymerization, which acts as a mimic to bone cement. The efficiency of the functionalization of SWCNT and the controlled formation of SWCNT-g-PMMA composites were characterized by TGA, Raman, TEM, NMR, XPS and dispersion measurements.     

Preparation of dendritic adamantane‐based polymers/layered silicate nanocomposites

An adamantane‐based atom transfer radical initiator (Adm‐Br) was prepared by the treatment of 1‐[[N‐[2‐Hydroxy‐l,l‐bis(hydroxymethyl)ethyl]amino]carbonyl]adamantane with bromopropionyl bromide. The resulting initiator was subsequently used in the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to form (Adm‐p‐MMA), which was successfully used, as a macroinitiator, in further ATRP reactions with 3‐O‐methacryloyl‐1,2 5,6‐di‐O‐isopropylidene‐α‐d ‐glucofuranose (gly), a glycomonomer, to afford the Adm‐p‐MMA‐b‐gly polymer. The new Adm‐p‐MMA‐b‐gly polymer subsequently was employed to form a nanocomposite with chitosan‐modified, Nanofil clay (NC). The resulting Adm‐p‐MMA‐b‐gly/NC composite material was progressively hydrolyzed to regenerate the OH groups of the glucose units within the Adm‐p‐MMA‐b‐gly copolymer. The polymer/NC nanocomposites were characterized by X‐ray diffraction, thermal gravimetric analysis, differential scanning calorimetry, and transmission electron microscopy. POLYM. ENG. SCI., 54:2669–2675, 2014. © 2013 Society of Plastics Engineers