A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Optimal channel coordination in use-based product-service system contracts

Nowadays, service economy efficiencies are key to keep competitiveness and increase market advantages. The development of Product-Service Systems (PSS) can be an interesting strategy as they seek to improve the business performance of all the participants in the value chain. This paper proposes a novel reliability-based reward scheme for use-oriented PSS contracts. In a PSS instead of paying for the product, the client pays a fee for its performance. The contribution of this work to the existing literature is to provide a quantitative tool for the development of a use-oriented PSS contract based on non-repairable component reliability and risk sharing. It can be extended to other performance metrics such as availability and reliability. A well designed PSS achieves a mutual growth agreement for the client and the supplier if it aligns their interests through channel coordination. This is achieved by balancing the improvement in the expected cost and profit for the client and the supplier, respectively. The improvement is measured with respect to a baseline scenario where no PSS contract exists. The methodology is tested using a case study that analyses mining haul truck tires. The results show a significant overall improvement in the main key performance indicators and environmental impact of the value chain.     

Recent advances in the production of γ‐valerolactone from biomass‐derived feedstocks via heterogeneous catalytic transfer hydrogenation

γ‐valerolactone (GVL) is an important intermediate chemical with a wide range of applications as fuel, fuel additive and as a green solvent which has received a great deal of attentions from both academia and industry. This review aims to summarise the advances in conversion of renewable feedstocks into GVL through heterogeneous catalytic transfer hydrogenation (CTH) with a strong emphasis on discussing preparation, characterisation and performance of the catalysts in order to provide a better understanding of various catalytic systems and also to compare them in terms of catalytic performance. © 2017 Society of Chemical Industry     

Planar array of corrugated tapered slot antennas for ultrawideband biomedical microwave imaging system

A planar antenna array that includes 12 corrugated tapered slot elements for use in ultrawideband (UWB) biomedical microwave imaging systems is presented. The used corrugate tapered slot antenna has a compact size, low profile, moderate gain, and distortionless performance in the time domain. The array is immersed in a carefully designed matching liquid of suitable dielectric constant to improve the matching between the array and the imaged object, and thus, to increase the dynamic range of the imaging system. A suitable platform is designed and fabricated to accommodate the array, breast phantom, and a coupling liquid for the case of UWB breast imaging. The design of the whole system is optimized using trust‐region framework method in the simulation tool CST Microwave Studio. The performance of the designed array is confirmed via measurements in a realistic imaging environment. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Hypoglycemic effects of cocoa (Theobroma cacao L.) autolysates

Fat, alkaloid and polyphenol contents of two clones of cocoa (UIT1 and PBC 140) were removed and the remaining powder was autolyzed at pH 3.5 and 5.2. Based on the results, autolysates of UIT produced at pH 3.5 exhibited the highest ability to inhibit α-amylase activity. However, no α-glucosidase inhibition activity was observed under the conditions specified. Autolysates produced under pH 3.5 caused the highest amount of insulin secretion. In streptozotocin-diabetic rats, all cocoa autolysates significantly decreased blood glucose at 4 h. To assure that the results from the assays were not due to the polyphenols of cocoa autolysates qualitative and quantitative tests were applied. According to their results cocoa autolysates were found to be free from polyphenols. Analysis of amino acid composition revealed that cocoa autolysates were abundant in hydrophobic amino acids. It can be suggested that besides other compounds of cocoa, its peptides and amino acids could contribute to its health benefits.     

Efficient functionalization of multi‐walled carbon nanotubes with p‐aminophenol and their application in the fabrication of poly(amide‐imide)‐matrix composites

The ultrasonically assisted preparation and characterization of poly(amide‐imide) (PAI) composites containing functionalized multi‐walled carbon nanotubes (MWCNTs) are reported. To improve the dispersion in and compatibility with the polymer matrix, the MWCNTs were surface‐modified with p‐aminophenol (p‐AP) under microwave irradiation. The process is fast, one‐pot, easy and results in a high degree of functionalization as well as dispersibility in organic solvents. The p‐AP‐functionalized MWCNTs (MWCNTs‐AP) were analysed by means of field emission and transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction and thermogravimetric analysis (TGA). The results consistently confirm the formation of p‐AP functionalities on MWCNTs which are able to undergo additional reactions, while the structure of the MWCNTs remains relatively intact. MWCNTs‐AP/PAI hybrid films were prepared with various MWCNTs‐AP contents (5–15 wt%) using a solution‐casting technique. Microscopic observations show that the dispersion of the MWCNTs‐AP is improved as a result of the organic groups on the MWCNT surface and functional groups in the PAI structure. The properties of the obtained composites were characterized extensively using the aforementioned techniques. TGA results show that the hybrid films exhibit a good thermal stability. Tensile mechanical testing was performed for the prepared composites, the results of which indicate an increase in the elastic modulus and tensile strength with increasing MWCNTs‐AP content. © 2013 Society of Chemical Industry     

Prediction of carbon dioxide separation from gas mixtures in petroleum industries using the Levenberg–Marquardt algorithm

In this study, two mathematical models for hydrate formation process to separate carbon dioxide by a combination of two different kinds of organic and surfactant promoters are presented. Promoters such as sodium dodecyl sulfate, sodium dodecyl benzene sulfonate, and dodecyl trimethyl ammonium chloride as surfactant promoters; also, tetrahydrofuran, cyclopentane, 1,3-dioxolane, and 2-methyl tetrahydrofuran as organic promoters have been used in recent years. The results showed that a combination of 3000 ppm of surfactant promoters and 4 wt% organic promoters had the highest separation rate of carbon dioxide and; consequently, the investigated models were based on this optimum condition. As a matter of fact, by using these simulations the hydrate formation behavior was predicted with high accuracy; moreover, conducting consuming experiments is not essential anymore. To sum up, in the present research both Vandermonde matrix model and Levenberg-Marquardt algorithm were applied to predict the hydrate formation behavior; in addition, their results were precisely considered and validated with experimental data.