Estimated daily intake of pesticide residues exposure by vegetables grown in greenhouses in Al-Qassim region,Saudi Arabia

Residues of 23 pesticides (13 insecticides, 3 fungicides, 3 herbicides, 2 acaricides, 1 rodenticide and 1 nematicide) in 160 different vegetable samples cultivated under greenhouse conditions and collected from 4 major supermarkets located in Al-Qassim region, Saudi Arabia were monitored. A multiresidue method was carried out by gas chromatography with mass spectrometry (GC–MS). Residues were found in 89 samples. Fifty four samples were found above the maximum residue levels (MRLs). The most frequently found pesticides were carbaryl followed by biphenyl and then carbofuran. MRL values exceeded most often in cabbage (11 samples) followed by squash, green pepper and carrot (7 samples each) followed by cucumber and lettuce (6 samples each), egg-plant (5 samples) and then tomato (4 samples). Also, cabbage showed the highest contamination rates (16 samples), followed by carrot, cucumber and green pepper (12 samples each), squash (11 samples), lettuce and tomato (9 samples each) and egg-plant (8 samples). The highest concentrations were determined in lettuce followed by squash, cabbage and carrot. Al-Qassim region population’s average daily intake (EDI) has been estimated between 2 × 10^?5 and 0.597 μg/kg body weight/day and the hazard index (EDI/acceptable daily intake (ADI)) less than the unity for the tested compounds. The data illustrated that the intakes are much lower than the ADIs and the exposure level to whole pesticides was below the level to produce health risk. The data indicated also the need for regular monitoring programs for pesticide residues in vegetables cultivated under greenhouse conditions, at the national level, to protect consumers’ health.     

GIS and Multi-Criteria Evaluation: Robust Tools for Integrated Water Resources Management

Abstract

Integrated water resources planning and management are considered very complex issues. These issues are usually addressed through the multi-sectoral, interdisciplinary and hierarchal decomposition approaches. In general, integrated resource management indicates the consideration of water, social, socio-economic, economic and environmental issues. The current study aims at merging the GIS and Multi-Criteria Evaluation (MCE) techniques for the integrated water resource management of a cropped area. An area of about 120,000 Hectares located in the Northern Nile River Delta area with a coastal zone on the Mediterranean was selected and GIS was applied to represent the area's different environment, social, economic, and water factors. Different randomization cropping pattern distribution scenarios were proposed. Through the merging of GIS and MCE approaches, three scenarios were run and evaluated at three different levels: farm, canal catchment area and whole area. This merging resulted in a very powerful tool for the evaluation of different plans. The merging of GIS and MCE really facilitated the decision making process for these types of integrated water management problems.     

Analysis of deformations and stresses in balanced and unbalanced adhesively bonded single-strap joints

Adhesively bonded joints are increasingly being used in joining various structural components. Adequate understanding of the behaviour of adhesively bonded joints is necessary to ensure efficiency, safety and reliability of such joints. While several joint configurations, such as the single- and double-lap joints have received considerable consideration, the single-strap joint configuration has received little attention, partly because earlier studies have shown it to be the least efficient.

One of the objectives of this paper is to demonstrate that strap joints can be as efficient as lap joints, as long as they are properly designed. This will be done through a detailed analytical investigation into influence of the parameters that govern peak stresses in the adhesive. The next objective is to produce simple equations by which the design of strap joint could be facilitated in an effective manner. For this, the developed analytical expressions are simplified and shown to provide accurate results. The derived solutions provide better insight into understanding the parameters that most influence the edge forces.     

Speech emotion recognition using optimized genetic algorithm-extreme learning machine

Multimedia Tools and Applications - Automatic Emotion Speech Recognition (ESR) is considered as an active research field in the Human-Computer Interface (HCI). Typically, the ESR system is...     

Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying Load Conditions

Abstract—In this article, a method based on the application of the discrete wavelet transform to the instantaneous reactive power signal, for diagnosing the occurrence of broken rotor bars in induction motors operating under time-varying load conditions, is presented. This method is based on the decomposition of the instantaneous reactive power signal, from which wavelet approximation and detail coefficients are extracted. The energy evaluation of known bandwidths permits to de?ne a fault severity factor. This method has been tested through the simulation of an induction motor using a mathematical model based on the winding-function approach. These simulation results are complemented by experimental tests conducted on an induction motor with several faulty rotors that can be interchanged and both simulation and experimental results have shown the effectiveness of the proposed method for broken rotor bars diagnosis in induction motors even under time-varying load conditions.     

Harmonic modeling,analysis, mitigation of Kuwait EHV electrical network

The issue of power system quality has been of great concern in the last decade. The problem associated with high harmonic contents in the power system not only results in poor quality of supply but also the operation of the system will get affected. Thus, the quality of a power supply system can be assured with the implementation of effective harmonic analysis and compensation. This paper presents a harmonic analysis of the Kuwait EHV network. Maximum loading conditions for the network are considered. Big industrial loads are located and simulated as they are considered the main source of harmonics in this network. The network is modeled using ETAP PowerStation software for both fundamental and harmonic load flow studies. A complete fundamental and harmonic load flow analysis is performed. Standard harmonic limits are adopted to propose the suitable shunt filters in order to reduce the total harmonic distortion. Results before and after using filters are presented and evaluated.     

Influence of temperature and permeate recovery on energy consumption of a reverse osmosis system

A model permits analysis of the influence of temperature on permeate recovery and energy consumption. The proposed model is based on the following assumptions: (1) membrane morphology is temperature-independent; (2) membrane rejection and other transport characteristics of membranes are position-independent; (3) specific water permeability of membranes was based on exponential dependence of viscosity vs. temperature; (4) temperature-dependence depembrane rejection is assumed to be linear. This allows for analyzing the influence of channel geometry, feed concentration, flow rate and temperature on permeate recovery and energy consumption. Calculated data are included. The solutionpresented can be segmented andbuilt into systems for comprehensive techno-economic evaluation of the RO-based process where temperature-dependence of process characteristics has to be considered.     

Mechanical properties of gamma‐irradiated styrene‐butadiene rubber/acid‐treated vermiculite clay/maleic anhydride nanocomposites

Nanoparticle vermiculite (VMT) clay was prepared by treatment with hydrochloric acid. Styrene‐butadiene rubber (SBR) nanocomposites were prepared by mixing different contents (2.5, 5, 7.5, and 10 phr) of untreated (VMT) and acid‐treated (DVMT) vermiculite clay, respectively. In addition, different contents (3, 7, and 10 phr) of maleic anhydride (MA) as compatibilizer were mixed via direct melt compounding in internal mixer. The effect of gamma irradiation, VMT clay, and MA contents on the mechanical properties was studied. The acid‐treated VMT clay was characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared (FT‐IR) spectroscopy. Meanwhile, the SBR/VMT composites, SBR/DVMT, and SBR/DVMT/MA nanocomposites were characterized via crosslinking density and tensile mechanical testing and FT‐IR spectroscopic analysis. The results indicated that good yield of nanoparticle vermiculite was achieved when the acid treatment was carried out for 120 h. In addition, the results showed that the presence of DVMT clay improved the chemical bonding in the SBR nanocomposites and hence their mechanical properties. The highest improvement was obtained when the contents of DVMT clay, MA, and irradiation dose were 10 phr, 3 phr, and 100 kGy, respectively. POLYM. ENG. SCI., 59:355–364, 2019. © 2018 Society of Plastics Engineers     

Inertia Effects on the Flow of Bingham Plastics Through Sudden Contractions in a Pipe

The present numerical study concentrates on the effects of moderate and high Reynolds numbers on the laminar flow of a non-Newtonian rigid viscoplastic (Bingham) fluid through a sudden contraction in a pipe. The flow is assumed to be steady, incompressible, and isothermal. Results are presented for a wide range of the governing Reynolds and yield numbers and the significant effects of these two parameters both on the integral and local kinematic properties of the flow field are established. Low yield numbers result in the disappearance of the recirculating flow region at the corner replacing it with a region of very low rates of deformation. The evolution of the centerline velocity in the vicinity of the contraction plane is shown to be independent of the yield number and dependent on the Reynolds number, while the concavities in the streamwise velocity profiles appearing at high Reynolds numbers are independent of the yield number. The pressure losses through the contraction increase with yield number with the effect being more pronounced at lower Reynolds numbers.     

Improved Approximations for Guarding 1.5-Dimensional Terrains

We present a 4-approximation algorithm for the problem of placing the fewest guards on a 1.5D terrain so that every point of the terrain is seen by at least one guard. This improves on the previous best approximation factor of 5 (see King in Proceedings of the 13th Latin American Symposium on Theoretical Informatics, pp. 629–640, 2006). Unlike most of the previous techniques, our method is based on rounding the linear programming relaxation of the corresponding covering problem. Besides the simplicity of the analysis, which mainly relies on decomposing the constraint matrix of the LP into totally balanced matrices, our algorithm, unlike previous work, generalizes to the weighted and partial versions of the basic problem.