Crystal structures and magnetic properties of iron (III)-based phosphates: Na4NiFe(PO4)3 and Na2Ni2Fe(PO4)3

Crystal structures from two new phosphates Na₄NiFe(PO₄)₃ (I) and Na₂Ni₂Fe(PO₄)₃ (II) have been determined by single crystal X-ray diffraction analysis. Compound (I) crystallizes in a rhombohedral system (S. G: R-3c, Z = 6, a = 8.7350(9) Å, c = 21.643(4) Å, R₁ = 0.041, wR₂=0.120). Compound (II) crystallizes in a monoclinic system (S. G: C2/c, Z = 4, a = 11.729(7) Å, b = 12.433(5) Å, c = 6.431(2) Å, β = 113.66(4)°, R₁ = 0.043, wR₂=0.111). The three-dimensional structure of (I) is closely related to the Nasicon structural type, consisting of corner sharing [(Ni/Fe)O₆] octahedra and [PO₄] tetrahedra forming [NiFe(PO₄)₃]⁴⁺ units which align in chains along the c-axis. The Na⁺ cations fill up trigonal antiprismatic sites within these chains. The crystal structure of (II) belongs to the alluaudite type. Its open framework results from [Ni₂O₁₀] units of edge-sharing [NiO₆] octahedra, which alternate with [FeO₆] octahedra that form infinite chains. Coordination of these chains yields two distinct tunnels in which site Na⁺.The magnetization data of compound (I) reveal antiferromagnetic (AFM) interactions by the onset of deviations from a Curie-Weiss behaviour at low temperature as confirmed by Mössbauer measurements performed at 4.2 K. The corresponding temperature dependence of the reciprocal susceptibility χ⁻¹ follows a typical Curie-Weiss behaviour for T > 105 K. A canted AFM state is proposed for compound (II) below 46 K with a field-induced magnetic transition at H ≈ 19 kOe, revealed in the hysteresis loop measured at 5 K. This transition is most probably associated with a spin-flop transition.     

Synthesis of Novel Series of Benzothieno [2,3-d] Pyrimidine Derivatives, Promising Anticancer Agents

An extension of the authors＇ previous discovery of in vitro antitumor activity of substituted thino [2,3-d] prymidine derivatives is reported. The synthesis of some new spirothino [2,3-d] prymidine （4a-f）, imidazolidin, substituted prymidinyl and substituted thiazolidine thino [2,3-d] prymidine derivatives have been described. Thirteen of the obtained compounds were selected by the NCI and evaluated for their in vitro anticancer activity. Seven of the investigated compounds, 4a, 8a, 9a, （12a, b）, 14a and 15a, displayed high anticancer activity in the primary assay. These compounds have been selected for a full anticancer screening against a 60-cell panel assay where they showed non-selective broad spectrum and promising activity against all cancer cell lines. Compounds 12a and 12b proved to be the active members in this study compared to 5-fluorouracil and cyclophosphamide as reference drugs, respectively. Compounds 12a and 12b were identified as promising lead compounds, evaluated for their in-vitro antitumor activity.     

Impact of salts on polyacrylamide hydrolysis and gelation: New insights

Polyacrylamide (PAM) and its derivatives are the most commonly used polymers in the preparation of polymeric gels for water control in petroleum reservoirs. This study involved the use of polyethylenimine (PEI) as a crosslinker for PAM. In this study, we investigated PAM alkaline hydrolysis at high temperatures. The effects of salts [sodium chloride (NaCl) and ammonium chloride (NH₄Cl)] on the degree of hydrolysis (DH) of PAM were investigated. These salts were used as retarders to elongate the gelation time of the PAM/PEI system. The data obtained from ¹³C‐NMR was used to understand the retardation mechanisms by salts. We found that NH₄Cl accelerated the extent of hydrolysis more in comparison with NaCl. Moreover, the apparent viscosity of the hydrolyzed samples was measured. PAM hydrolysis in the presence of NH₄Cl resulted in a lower solution viscosity than that in the presence of NaCl. Therefore, NH₄Cl was more effective in shielding negative charges on the carboxylate groups of the partially hydrolyzed polyacrylamide (PHPA) chain. NaCl and NH₄Cl were compatible with the PHPA/PEI system, but sodium carbonate showed a white precipitate. In addition, high‐temperature/high‐pressure elastic modulus data were reported for the first time for this system. Differential scanning calorimetry was coupled with rheology to explain the PAM/PEI crosslinking in the presence of salts. Models were developed to assess the impact of the salts on the PAM DH and the induction period before gelation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41185.     

Micro-capacitors based on electrochemically grown vertical arrays of gold nanowires as electrodes

This paper describes the development of micro-capacitors with electrodes based on electrochemically grown vertical gold nanowire arrays. A high aspect-ratio anodized aluminum oxide template integrated on silicon dioxide/silicon substrates was exploited for fabricating a vertical array of nanowires with a high surface to volume ratio. Bismuth ferric oxide thin films were deposited to create high dielectric material between the electrodes using room temperature electrodeposition. This nanofabrication process may be compatible with a complementary metal-oxide-semiconductor (CMOS) process, therefore, this capacitor can be used for protecting and regulating the surge voltage biased to the CMOS circuits. This capacitor achieved a high density capacitance of 3.1 μF/m² at 1 MHz, which was measured using a parallel plate set-up.     

Computations of shear driven vortex flow in a cylindrical cavity using a modified k-ε turbulence model

In this paper, a new variant of the k-ε turbulence model (Saqr et al., CFD Letters, 1(2) pp. 87–94) is used to compute the shear driven vortex flow in an open cylindrical cavity. The results are compared with published LDA measurements for such flow configuration. The modified turbulence model demonstrated good agreement with experimental results, which further supports its validity in computing vortex dominated flows.     

Determinants of rural household food security: a comparative analysis of African and Asian studies

This paper reviews the determinants of rural household food security in Africa and Asia where more than 88% of the world's undernourished people live. A conceptual model is proposed on the basis of the three widely known components of food security: food availability, accessibility and utilisation. This model is used to select a total of 40 peer‐reviewed studies carried out over the last decade (20 each from Africa and Asia). A meta‐analysis technique is then used to identify which determinants of food security have been highlighted and how well the causality is demonstrated. Food availability is the most studied component in both regions, followed by food accessibility, while food utilisation is the most neglected component in these studies. © 2013 Society of Chemical Industry     

Developing a stochastic model to predict the strength and crack path of random composites

We characterize fracture and effective stress–strain graphs in 2D random composites subjected to a uniaxial in-plane uniform strain. The fibers are arranged randomly in the matrix. Both fibers and matrix are isotropic and elastic–brittle. We conduct this analysis numerically using a very fine two-dimensional triangular spring network and simulate the crack initiation and propagation by sequentially removing bonds which exceed a local fracture criterion. In particular, we focus on effect of geometric randomness on crack path of random composites. Based on that two stochastic micro-mechanic models are presented that can predict with confidence the failure probability of random matrix–inclusion composites.     

Antifungal activity of films and solutions based on chitosan against typical seed fungi

The use of eco-freindly polymers as antimicrobial materials is in growth due to the need to reduce the negative impact of conventional treatments on the environment and the human health. The purpose of the present study was to assess the antifungal properties of films and solutions based on chitosan with different molecular weight at different concentrations. Surfactants were added to the formulation to assess their impact on treatment efficiency. The antifungal activity was conducted against tree fungi, Aspergillus niger, Alternaria alternata and Rhizopus oryzae. Results indicated important and significant differences of the antifungal activity between chitosan based solutions and chitosan based films. Furthermore, the antifungal activity of the different treatment depended on the type of fungus treated. Thus, chitosan film treatments were significantly more effective on A. niger than solution treatments. On the other hand, solution treatments resulted in higher radial inhibition when applied against A. alternata or R. oryzae. The highest radial inhibition was observed against A. alternata (97%) using a chitosan solution. The influence of the other parameters (concentration, molecular weight and surfactant type) on treatment efficiency was not as important and their significance depended on treatment type and fungus nature.     

ENERGY DISSIPATION DISTRIBUTION AND MIXING IN A TORUS REACTOR

Previous works devoted to the development of the swirl flow generated by rotation of the marine screw impeller in the loop toroidal reactor show that the flow structure is characterized by the existence of a secondary flow. The deformation of the axial velocity profile, due to the bends curvature and the rotation of the agitator, modify considerably the friction and the transfer near the wall. The objective of this work is to study the toroidal flow and to characterize the wall turbulence. The wall shear stress distribution in the torus were performed by using an electrochemical method. The measurements of the wall shear stress were carried out in the inner and outer walls. The evolution of the wall velocity gradient with the longitudinal distance depends on the location in the torus. These results allow to obtain information about the friction factor, which is compared with the one measured directly by using piezometric connections. The experimental determination of the axial dispersion coefficient is obtained by using the dispersion plug flow model with a total recirculation. Finally, a relationship between the turbulent characteristics and the mixing parameters has been established.     

Tea and coffee consumption in relation to vitamin D and calcium levels in Saudi adolescents

ABSTRACT: BACKGROUND: Coffee and tea consumption was hypothesized to interact with variants of vitamin D-receptor polymorphisms, but limited evidence exists. Here we determine for the first time whether increased coffee and tea consumption affects circulating levels of 25-hydroxyvitamin D in a cohort of Saudi adolescents. METHODS: A total of 330 randomly selected Saudi adolescents were included. Anthropometrics were recorded and fasting blood samples were analyzed for routine analysis of fasting glucose, lipid levels, calcium, albumin and phosphorous. Frequency of coffee and tea intake was noted. 25-hydroxyvitamin D levels were measured using enzyme-linked immunosorbent assays. RESULTS: Improved lipid profiles were observed in both boys and girls, as demonstrated by increased levels of HDL-cholesterol, even after controlling for age and BMI, among those consuming 9--12 cups of coffee/week. Vitamin D levels were significantly highest among those consuming 9--12 cups of tea/week in all subjects (p-value 0.009) independent of age, gender, BMI, physical activity and sun exposure. CONCLUSION: This study suggests a link between tea consumption and vitamin D levels in a cohort of Saudi adolescents, independent of age, BMI, gender, physical activity and sun exposure. These findings should be confirmed prospectively.