Preparation and properties of multiwalled carbon nanotube/polycaprolactone nanocomposites

Multiwalled carbon nanotube/polycaprolactone nanocomposites (MWNT/PCL) were prepared by in situ polymerization, whereby as‐received MWNTs (P‐MWNTs) and purified MWNTs (A‐MWNTs) were used as reinforcing materials. The A‐MWNTs were purified by nitric acid treatment, which introduced the carboxyl groups (COOH) on the MWNT. The micrographs of the fractured surfaces of the nanocomposites showed that the A‐MWNTs in A‐MWNT/PCL were better dispersed than P‐MWNTs in PCL matrix (P‐MWNT/PCL). Percolation thresholds of the P‐MWNT/PCL and A‐MWNT/PCL, which were studied by rheological properties, were found at ～2 wt % of the MWNT. The conductivity of the P‐MWNT/PCL was between 10^?1 and 10^?2 S/cm by loading of 2 wt % of MWNT although that of the A‐MWNT/PCL reached ～10^?2 S/cm by loading of 7 wt % of MWNT. The conductivity of the P‐MWNT/PCL was higher than that of the A‐MWNT/PCL at the entire range of the studied MWNT loading, which might be due to the destruction of π‐network of the MWNT by acid treatment, although the A‐MWNT/PCL was better dispersed than the P‐MWNT/PCL. The amount of the MWNT at which the conductivity of the nanocomposite started to increase was strongly correlated with the percolation threshold. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1957–1963, 2007     

Crystal structures and magnetic properties of iron (III)-based phosphates: Na4NiFe(PO4)3 and Na2Ni2Fe(PO4)3

Crystal structures from two new phosphates Na₄NiFe(PO₄)₃ (I) and Na₂Ni₂Fe(PO₄)₃ (II) have been determined by single crystal X-ray diffraction analysis. Compound (I) crystallizes in a rhombohedral system (S. G: R-3c, Z = 6, a = 8.7350(9) Å, c = 21.643(4) Å, R₁ = 0.041, wR₂=0.120). Compound (II) crystallizes in a monoclinic system (S. G: C2/c, Z = 4, a = 11.729(7) Å, b = 12.433(5) Å, c = 6.431(2) Å, β = 113.66(4)°, R₁ = 0.043, wR₂=0.111). The three-dimensional structure of (I) is closely related to the Nasicon structural type, consisting of corner sharing [(Ni/Fe)O₆] octahedra and [PO₄] tetrahedra forming [NiFe(PO₄)₃]⁴⁺ units which align in chains along the c-axis. The Na⁺ cations fill up trigonal antiprismatic sites within these chains. The crystal structure of (II) belongs to the alluaudite type. Its open framework results from [Ni₂O₁₀] units of edge-sharing [NiO₆] octahedra, which alternate with [FeO₆] octahedra that form infinite chains. Coordination of these chains yields two distinct tunnels in which site Na⁺.The magnetization data of compound (I) reveal antiferromagnetic (AFM) interactions by the onset of deviations from a Curie-Weiss behaviour at low temperature as confirmed by Mössbauer measurements performed at 4.2 K. The corresponding temperature dependence of the reciprocal susceptibility χ⁻¹ follows a typical Curie-Weiss behaviour for T > 105 K. A canted AFM state is proposed for compound (II) below 46 K with a field-induced magnetic transition at H ≈ 19 kOe, revealed in the hysteresis loop measured at 5 K. This transition is most probably associated with a spin-flop transition.     

Plasmodium species aware based quantification of malaria parasitemia in light microscopy thin blood smear

Malaria is a serious worldwide disease, caused by a bite of a female Anopheles mosquito. The parasite transferred into complex life round in which it is grown and reproduces into the human body. The detection and recognition of Plasmodium species are possible and efficient through a process called staining (Giemsa). The staining process slightly colorizes the red blood cells (RBCs) but highlights Plasmodium parasites, white blood cells and artifacts. Giemsa stains nuclei, chromatin in blue tone and RBCs in pink color. It has been reported in numerous studies that manual microscopy is not a trustworthy screening technique when performed by nonexperts. Malaria parasites host in RBCs when it enters the bloodstream. This paper presents segmentation of Plasmodium parasite from the thin blood smear points on region growing and dynamic convolution based filtering algorithm. After segmentation, malaria parasite classified into four Plasmodium species: Plasmodium falciparum, Plasmodium ovale, Plasmodium vivax, and Plasmodium malaria. The random forest and K‐nearest neighbor are used for classification base on local binary pattern and hue saturation value features. The sensitivity for malaria parasitemia (MP) is 96.75% on training and testing of the proposed approach while specificity is 94.59%. Beside these, the comparisons of the two features are added to the proposed work for classification having sensitivity is 83.60% while having specificity is 94.90% through random forest classifier based on local binary pattern feature.     

Effect of anti-scale agents on the solubility of CO2 in seawater at temperatures of 60 to 90ºC and pressures of 1–2 bar

The objective of this work is to present experimental data that would show the effect of temperature, salinity, pressure and the presence of anti-scale additives on CO₂ solubility in seawater. The paper examines the solubility of CO₂ in real seawater and real seawater dosed with two different anti-scale additives. The study has been performed at temperatures between 60ºC and 90ºC and at pressures of 1 and 2 bar. To assess the effect of each anti-scale additive on CO₂ gas solubility varying doses, 2–10 ppm of anti-scale additive have been used. For the purpose of the experimentation an experimental rig has been designed to ensure adequate contact between the gas phase and the aqueous phase. The continuous quantitative analysis of CO₂ concentration flowing from the experimental rig was measured using a CM-5011 Carbon Coulometer. A mass balance was carried out to calculate the amount of CO₂ absorbed into solution; Henry’s law constant was then calculated.     

Synthesis of Novel Series of Benzothieno [2,3-d] Pyrimidine Derivatives, Promising Anticancer Agents

An extension of the authors＇ previous discovery of in vitro antitumor activity of substituted thino [2,3-d] prymidine derivatives is reported. The synthesis of some new spirothino [2,3-d] prymidine （4a-f）, imidazolidin, substituted prymidinyl and substituted thiazolidine thino [2,3-d] prymidine derivatives have been described. Thirteen of the obtained compounds were selected by the NCI and evaluated for their in vitro anticancer activity. Seven of the investigated compounds, 4a, 8a, 9a, （12a, b）, 14a and 15a, displayed high anticancer activity in the primary assay. These compounds have been selected for a full anticancer screening against a 60-cell panel assay where they showed non-selective broad spectrum and promising activity against all cancer cell lines. Compounds 12a and 12b proved to be the active members in this study compared to 5-fluorouracil and cyclophosphamide as reference drugs, respectively. Compounds 12a and 12b were identified as promising lead compounds, evaluated for their in-vitro antitumor activity.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Microscopic melanoma detection and classification: A framework of pixel‐based fusion and multilevel features reduction

The numbers of diagnosed patients by melanoma are drastic and contribute more deaths annually among young peoples. An approximately 192,310 new cases of skin cancer are diagnosed in 2019, which shows the importance of automated systems for the diagnosis process. Accordingly, this article presents an automated method for skin lesions detection and recognition using pixel‐based seed segmented images fusion and multilevel features reduction. The proposed method involves four key steps: (a) mean‐based function is implemented and fed input to top‐hat and bottom‐hat filters which later fused for contrast stretching, (b) seed region growing and graph‐cut method‐based lesion segmentation and fused both segmented lesions through pixel‐based fusion, (c) multilevel features such as histogram oriented gradient (HOG), speeded up robust features (SURF), and color are extracted and simple concatenation is performed, and (d) finally variance precise entropy‐based features reduction and classification through SVM via cubic kernel function. Two different experiments are performed for the evaluation of this method. The segmentation performance is evaluated on PH2, ISBI2016, and ISIC2017 with an accuracy of 95.86, 94.79, and 94.92%, respectively. The classification performance is evaluated on PH2 and ISBI2016 dataset with an accuracy of 98.20 and 95.42%, respectively. The results of the proposed automated systems are outstanding as compared to the current techniques reported in state of art, which demonstrate the validity of the proposed method.     

Internationalisation for Survival: The Case of New Ventures

The aim is to deepen our understanding about the internationalisation–survival relationship in the case of new ventures in traditional manufacturing sectors. Hypotheses were tested through Cox’s proportional hazard regressions on a sample of 3,350 firms aged 10 years or less, from the textile-clothing and footwear industry in Spain. A vast majority of new ventures that were both established and closed down over that time are purely domestic firms. That means, a firm increases its likelihood of survival when it becomes international. The highest failure risk relates to those new ventures which are territorially agglomerated and are domestically oriented. Internationalisation is an unconditional strategy for surviving in the case of new manufacturing ventures. In addition, location and efficiency in the activity both matter when operating in international markets. Statistical tests show that an interactive effect of agglomeration and internationalisation exists, while no support for the interaction between age and internationalisation is found. Future research should investigate the trade-off between growth and survival forces to determine the optimum moment to go international and to characterise the strategic choices followed by those new ventures that survive longest.     

Impact of salts on polyacrylamide hydrolysis and gelation: New insights

Polyacrylamide (PAM) and its derivatives are the most commonly used polymers in the preparation of polymeric gels for water control in petroleum reservoirs. This study involved the use of polyethylenimine (PEI) as a crosslinker for PAM. In this study, we investigated PAM alkaline hydrolysis at high temperatures. The effects of salts [sodium chloride (NaCl) and ammonium chloride (NH₄Cl)] on the degree of hydrolysis (DH) of PAM were investigated. These salts were used as retarders to elongate the gelation time of the PAM/PEI system. The data obtained from ¹³C‐NMR was used to understand the retardation mechanisms by salts. We found that NH₄Cl accelerated the extent of hydrolysis more in comparison with NaCl. Moreover, the apparent viscosity of the hydrolyzed samples was measured. PAM hydrolysis in the presence of NH₄Cl resulted in a lower solution viscosity than that in the presence of NaCl. Therefore, NH₄Cl was more effective in shielding negative charges on the carboxylate groups of the partially hydrolyzed polyacrylamide (PHPA) chain. NaCl and NH₄Cl were compatible with the PHPA/PEI system, but sodium carbonate showed a white precipitate. In addition, high‐temperature/high‐pressure elastic modulus data were reported for the first time for this system. Differential scanning calorimetry was coupled with rheology to explain the PAM/PEI crosslinking in the presence of salts. Models were developed to assess the impact of the salts on the PAM DH and the induction period before gelation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41185.