Probiotics for cure of Helicobacter pylori infection: A review

Human physiology normally contains pathogenic and non-pathogenic microorganisms in the gastrointestinal flora. Disturbance of these microorganism balance results in the formation of infection. Extensive use of antibiotics for cure of these disturbances like Helicobacter pylori (H. pylori) infection leads to patient discomfort and associated side-effects. There is a need to adopt adjunct or alternative approach in order to minimize such conditions. Probiotics is one of the potential therapies to cure gastrointestinal discomforts especially associated with H. pylori. It competes through non-immune and immune systems. This review article concludes that probiotics are used to eradicate the infection at increased rate, and decreased associated side-effects are caused by triple therapy. A proper evaluation of these probiotics is demanded before their use in future as a commercial product. Furthermore, their effect on immune system requires more research work so that their usage for other chronic disorders can also be considered.     

Synthesis and Properties of MoSi2–MoB–SiC Ceramics

MoB and SiC particulate reinforced MoSi₂ matrix composites were synthesized in situ from Mo, Si, and B₄C powder mixtures by self‐propagating high‐temperature synthesis (SHS). The SHS MoSi₂–MoB–SiC products were vacuum hot‐pressed (HPed) at 1400°C for 90 min to fabricate high‐density (> 97.5% relative density) bulk composites. Microstructure refinement and improvements in the Vickers hardness and fracture toughness of the HPed composites were observed with increasing B₄C content in the reaction mixture. The HPed composite of composition MoSi₂–0.4MoB–0.1SiC exhibited grain size of 1–5 μm, Vickers hardness of 12.5 GPa, bending strength of 537 MPa, and fracture toughness of 3.8 MPa.m^1/2. These excellent mechanical properties indicate that MoB and SiC particulate reinforced MoSi₂ composites could be promising candidates for structural applications.     

Effect of fortification on physico-chemical and microbiological stability of whole wheat flour

Stability of fortified whole wheat flour (WWF) was evaluated using NaFeEDTA, elemental iron, ZnSO₄ and ZnO as fortificants. Fortified WWF was stored in tin boxes and polypropylene bags for 60 days under ambient storage condition (ASC) and controlled storage condition (CSC). Fortification significantly (p ? 0.05) decreased moisture and protein content and increased ash content to 5.44%, 6% and 23%, as compared to control. Fortified WWF, assayed periodically for mould contamination manifested a significant inhibition (∼1 log reduction) in flours containing elemental iron. Low storage temperature and relative humidity (RH) indicated lower level of mould count during extended storage time. Tin boxes, as storage material, exhibited a better protection against mould attack, acting as an effective barrier for moisture. Fortificants exerted a slight deteriorative effect on texture characteristics of the chapattis made of these flours but chapattis were still accepted by the judges. Zinc fortificants seemed like having little or no effect on the quality of the flours and chapattis, made of such flours. Shelf life of fortified flour may be extended by using elemental iron as fortificant and storing the product in tin boxes under relatively low temperature and RH.     

Isolation and identification of lipase producing thermophilic Geobacillus sp. SBS-4S: cloning and characterization of the lipase

A thermophilic microorganism, SBS-4S, was isolated from a hot spring located in Gilgit, Northern Areas of Pakistan. It was found to be an aerobic, gram-positive, rod-shaped, thermophilic bacterium that grew on various sugars, carboxylic acids and hydrocarbons at temperatures between 45°C and 75°C. Complete 16S rRNA gene sequence of the microorganism exhibited homology to various species of genus Geobacillus. A highest homology of 99.8% was found with Geobacillus kaustophilus. A partial (0.7 kbp) chaperonin gene sequence also showed a highest homology of 99.4% to that of G. kaustophilus whereas biochemical characteristics of the microorganism were similar to Geobacillus uzenensis. Based on biochemical characterization, 16S rRNA and chaperonin gene sequences, we identified SBS-4S as a strain of genus Geobacillus. Strain SBS-4S produced several extracellular enzymes including amylase, protease and lipase. The lipase encoding gene was cloned, expressed in Escherichia coli and the gene product was characterized. The recombinant lipase was optimally active at 60°C with stability at wide pH range (6-12). The enzyme activity was enhanced remarkably in the presence of Ca(+2). The K(m) and the V(max) for the hydrolysis of p-nitrophenyl acetate were 3.8mM and 2273 μmol min(-1)mg(-1), respectively. The ability of the recombinant enzyme to be stable at a wide pH range makes it a potential candidate for use in industry.     

Preparation of Co–Mo/B2O3/Al2O3 catalysts for hydrodesulfurization: Effect of citric acid addition

The effect of citric acid (CA) addition was studied on the HDS of thiophene over Co–Mo/(B)/Al₂O₃ catalysts. The catalysts were characterized by means of LRS, Mo K-edge EXAFS, NO adsorption capacity measurements, and UV–vis spectra. The catalysts were subjected to a chemical vapor deposition (CVD) technique using Co(CO)₃NO as a precursor of Co in order to get deeper insights into the effect of citric acid addition. It was shown that the HDS activity was enhanced by the citric acid addition up to the CA/Mo mole ratio of around 1 and leveled off with further addition. The amount of Co anchored by the CVD was increased by the addition of citric acid, suggesting an increase in the dispersion of MoS₂ particles on the catalyst by the simultaneous presence of Co, Mo and citric acid, in conformity with the increase in the NO adsorption capacity. In contrast to Co–Mo catalysts, the edge dispersion of MoS₂ particles in Mo/B/Al₂O₃ was not affected by the addition of citric acid. The LRS, UV–vis spectra and Mo K-edge EXAFS showed that Co–CA and Mo–CA surface complexes are formed by the addition of citric acid. The Co–CA surface complex is more preferentially formed on CoMo/Al than on CoMo/B/Al, in agreement with a greater promoting effect of citric acid at a lower CA/Mo mole ratio for CoMo/Al than for CoMo/B/Al.     

N-3 Polyunsaturated Fatty Acids Modulate In-Vitro T Cell Function in Type I Diabetic Patients

In this work, we assessed the in-vitro effects of eicosapentaenoic acid (EPA; C20:5n-3) and docosahexaenoic acid (DHA; C22:6n-3) (final concentration, 15 microM) on T cell blastogenesis, interleukin-2 and -4 (IL-2, IL-4) secretion, fatty acid composition and intracellular oxidative status in type I diabetic patients with or without complications. Con A stimulated lymphocyte proliferation, glucose uptake, intracellular reduced glutathione levels and catalase activity were lower in diabetics as compared to controls, regardless to the presence of complications. EPA and DHA diminished T-lymphocyte proliferation and IL-2 production but enhanced IL-4 secretion in both diabetic and control groups. No changes in the levels of reduced glutathione and in the activities of catalase and SOD were observed in control T cells cultured in the presence of EPA and DHA. However, in diabetic patients, addition of n-3 PUFA to culture induced an increase in T cell levels of reduced glutathione and hydroperoxide, and in activities of catalase and SOD. Low levels of arachidonic acid (C20:4n-6) were found in plasma membrane phospholipids of lymphocytes from diabetic patients compared to controls. Incubation of lymphocytes with EPA and DHA was associated with an incorporation of these fatty acids in membrane phospholipids. In conclusion, the beneficial effects of n-3 PUFA on T cell functions in type I diabetes could be attributed to their suppressive action and modulation of cytokine secretion, and to the improvement of intracellular oxidative status.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

Discrete‐time Lyapunov stable‐staggered estimator MIMO adaptive interference cancelation with experimental verification

Adaptive interference cancelation is of vital importance in a broad array of scientific and engineering disciplines. In this paper we develop a closed‐loop discrete‐time interference cancelation algorithm. The novel features of this algorithm are its ability to deal with multiple channels being affected by interferences with different frequency spectrums. Also we provide a proof of Lyapunov stability of closed‐loop system and asymptotically perfect interference cancelation for a class of interference signals. Furthermore, we introduce a new approach for updating the estimator through the use of staggered estimate. The goal of staggered estimation is to minimize the total number of estimates/calculations done within a time period while ensuring that there is no estimator aliasing. Finally, the proposed algorithm is implemented on an TMS320C6713 DSP Kit and an experimental verification is obtained. Copyright © 2009 John Wiley & Sons, Ltd.     

Laser nitriding of tool steel: thermal stress analysis

In this paper, bees algorithm (BA) has been used for determine the optimal number of material handling equipment (MHE) used on the production centers. The unmet demands become zero at the end of the planning horizon, i.e., the part demands are totally satisfied through the horizon. The newly developed model provides network information, such as unmet demands and number of loaded and empty of MHE at any given time and centers. Consequently, the model provides a tool for helping managers with planning and decision-making in manufacturing systems. Computational tests showed that small-sized instances can be solved by the exact approach in a fair amount of central processing unit time, but it is not feasible for medium and large-sized instances. To tackle this problem, a bees algorithm is proposed to solve the model. The algorithm is a search procedure inspired by the way honeybees forage for food. The results obtained show the robust performance of the bees algorithm.     

Structural stability of silver under single-chamber solid oxide fuel cell conditions

In the present study, structural stability of silver under single-chamber conditions has been examined. Micro-tubular cells made of conventional solid oxide fuel cell materials (Ni-YSZ/YSZ/LSM) with silver paste and silver current-collecting wires (for both electrodes) were prepared. The cells were operated with methane/air mixture of 25/60 mL min⁻¹, furnace temperature of 750 °C, and at an operating voltage of 0.5 V. The results showed increasing porosity in the current-collecting silver wire with time, leading to rupture, finally. It is postulated that the porosity formation could be due to the formation of silver oxide which is highly unstable (volatile) at operating temperature considered in this study. Furthermore, vaporization and melting of silver due to cell overheating under mixed-reactant conditions is expected. Based on experimental evidences, it is concluded that silver may not be a good choice to be employed under the above specified operating conditions, as it lacks long-term structural stability.