Analytical studies on the temperature distribution in spiral plate heat exchangers: Straightforward design formulae for efficiency and mean temperature difference

The temperature distribution in spiral plate heat exchangers has been calculated numerically to obtain the efficiency and the logarithmic mean temperature difference (LMTD) correction factors F as a function of the number of transfer units N, the number of turns n, and the heat capacity rate ratio C. It has been found that the LMTD correction factors, when plotted against the number of transfer units per turn N/n, fall approximately on a single curve. That curve for balanced countercurrent operation (C = −1) can be very closely represented by the simple formula F = (n/N)tanh(N/n). From that simple analytic representation of our numerical results it was concluded that a simpler physical model might exist to represent the overall behaviour of a spiral plate heat exchanger equally well. In fact, a countercurrent cascade of n cocurrent heat exchangers does result exactly in the above-mentioned formula for the LMTD correction factor. From that model the F-factors for other heat capacity rate ratios C (−1 < C 0) can also be calculated and they are in sufficient agreement with the numerical results.     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.     

Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties

Cotton and cotton/polyester fabrics were treated against microbial attack by applying a formulation based essentially on ZnO under high‐energy radiation and thermal curing. To achieve the homogeneity and the reactivity of the treating formulation, a binder (Impron MTP) and a dispersing agent (Setamol WS) were used with ZnO. The antimicrobial property of the fabrics was evaluated, in terms of mechanical properties, by a soil burial test. Moreover, the effect of antimicrobial finishing on the dyeing properties in terms of color strength was investigated. It was found that the best composition that affords the best antimicrobial protection to cotton fabrics contains 2% ZnO, 2% binder, and 1% dispersing agents. For the cotton/polyester blend, the best results were achieved at the same conditions except the ZnO was 1%. It was found that the treatment under the effect of electron‐beam irradiation is better than that of gamma irradiation and thermal curing. The results showed that when the finishing process was carried out before dyeing with a reactive dye, it affects the color strength rather than performing the finishing after the dyeing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1129–1137, 2003     

PRIVACY LEAKAGE IN HEALTH SOCIAL NETWORKS

Members of health social networks may be susceptible to privacy leaks by the amount of information they leave behind. The threat to privacy increases when members of these networks reuse their pseudonyms in other social networks. The risk of re‐identifying users from such networks requires quantitative estimates to evaluate its magnitude. The estimates will enable managers and members of health social communities to take corrective measures. We introduce a new re‐identification attack, the social network attack, that takes advantage of the fact that users reuse their pseudonyms. To demonstrate the attack, we establish links between MedHelp and Twitter (two popular social networks) based on matching pseudonyms. We used Bayesian networks to model the re‐identification risk and used stylometric techniques to identify the strength of the links. On the basis of our model 7‐11. 8% of the MedHelp members in the sample population who reused their pseudonyms in Twitter were re‐identifiable compared with 1% who did not. The risk estimates were measured at the 5% risk threshold. Our model was able to re‐identify users with a sensitivity of 41% and specificity of 96%. The potential for re‐identification increases as more data is accumulated from these profiles, which makes the threat of re‐identification more serious.     

Molecular solutions for minimum and exact cover problems in the tile assembly model

The tile assembly model is a novel biological computing model where information is encoded in DNA tiles. It is an efficient way to solve NP-complete problems due to its scalability and parallelism. In this paper, we apply the tile assembly model to solve the minimum and exact set cover problems, which are well-known NP-complete problems. To solve the minimum set cover problem, we design a MinSetCover system composed of three parts, i.e., the seed configuration subsystem, the nondeterministic choice subsystem, and the detection subsystem. Moreover, we improve the MinSetCover system and propose a MinExactSetCover system for solving the problem of exact cover by 3-sets. Finally we analyze the computation complexity and perform a simulation experiment to verify the effectiveness and correctness of the proposed systems.     

Particle-Substrate Collisions, Particle Rebound and Removal

Recent progress in particle capture and rebound and its effect on the adhesion force is reviewed in this paper. Particles rebound when the incident velocity is greater than a characteristic critical velocity. Lower impaction velocity particles experience elastic and plastic deformation. Recent models for particle rebound and capture are discussed and evaluated in terms of their restrictive assumptions and results. Recent experimental data of particle rebound and capture is also discussed, as is the hydrodynamic removal of captured particles. The removal of particles occurs when the applied hydrodynamic removal force overcomes the adhesion force. The effect of adhesion-induced deformation on the removal of particles is introduced and discussed.     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

Anodic oxidation of bismuth in H2SO4 solutions

Anodic charging curves have been measured on polycrystalline Bi in H₂SO₄ solutions (0·01–6·0 N) at 30°C. The effect of various experimental procedures, eg electrode treatment and stirring, has been established. The anodic behaviour of Bi depends markedly on the acid concentration. In the high range, the results indicate dissolution which follows a Tafel relation. However, in dilute solutions, growth of oxide film occurs, and the potential rises rapidly with time, reaching over 100 V at high cds. Sparking and oxide breakdown start at about 150 V. Oxide growth follows the high field ionic conduction. The reciprocal capacitance is linearly related to the logarithm of cd. The constants of the exponential law, the half-barrier width, and the field strength have been calculated The last lies between 1 and 3 × 10⁶ V/cm at 1 mA/cm². The effect of F⁻ and Cl⁻ ions on oxide growth in H₂SO₄ has been also investigated.     

Dynamic watermarking scheme for quantum images based on Hadamard transform

In this paper, a novel watermarking scheme for quantum images based on Hadamard transform is proposed. In the new scheme, a unitary transform controlled by a classical binary key is implemented on quantum image. Then, we utilize a dynamic vector, instead of a fixed parameter as in other previous schemes, to control the embedding process. The dynamic embedding vector is decided by both the carrier quantum image and the watermark image, which is only known by the authorized owner. The proposed scheme is analyzed from visual quality, computational complexity, and payload capacity. Analysis and results show that the proposed scheme has better visual quality under a higher embedding capacity and lower complexity compared with other schemes proposed recently.