Anodic oxidation of bismuth in H2SO4 solutions

Anodic charging curves have been measured on polycrystalline Bi in H₂SO₄ solutions (0·01–6·0 N) at 30°C. The effect of various experimental procedures, eg electrode treatment and stirring, has been established. The anodic behaviour of Bi depends markedly on the acid concentration. In the high range, the results indicate dissolution which follows a Tafel relation. However, in dilute solutions, growth of oxide film occurs, and the potential rises rapidly with time, reaching over 100 V at high cds. Sparking and oxide breakdown start at about 150 V. Oxide growth follows the high field ionic conduction. The reciprocal capacitance is linearly related to the logarithm of cd. The constants of the exponential law, the half-barrier width, and the field strength have been calculated The last lies between 1 and 3 × 10⁶ V/cm at 1 mA/cm². The effect of F⁻ and Cl⁻ ions on oxide growth in H₂SO₄ has been also investigated.     

Pentavalent vanadium ion-induced grafting of methyl methacrylate onto cotton cellulose

Graft polymerization of methyl methacrylate (MMA) onto cotton cellulose using vanadium pentanitrate as initiator was studied under a variety of conditions. The graft yield increased with increasing initiator concentration up to 8 mmole/l. and then decreased upon further increase in initiator concentration. Increasing MMA concentration from 1 to 5% was accompanied by a significant increase in the degree of grafting. The latter was also affected by the kind and concentration of the acid incorporated in the polymerization medium. Based on graft yields, the efficiency of the acids follows the order H₂SO₄ > HNO₃ > HClO₄. Replacement of the acid with isopropyl alcohol was also examined. An isopropyl alcohol concentration of 10% constitutes the optimal concentration for grafting. Maximum graft yield depends upon the polymerization temperature; it follows the order 50°C ≥ 60°C > 40°C > 30°C > 70°C. Reaction mechanisms for grafting in the presence of acid as well as in the presence of isopropyl alcohol are proposed.     

Electrodeposition of catalytically active nickel powders from sulphate baths. I. Effect of bath constituents

A detailed study was made of the influence of the sulphate bath constituents: 0.3 - 0.0125 NiSO₄·7H₂O (I), 0.05 – 0.23 (NH₄)₂SO₄ (II), 0.1 – 0.4 H₃BO₃ (III) and 0.07 – 0.35 mol l^?1 Na₂SO₄·10H₂O (IV) on the electrodeposition of nickel powder. The cathodic polarization, current efficiency, growth morphology, crystallite size and catalytic activity of the electrodeposited nickel powders were affected to different extents by the bath constituents. A highly pure nickel powder characterized by a small crystallite size (776 Å) and moderate catalytic activity was obtained from a bath containing: 0.0125 (I), 0.23 (II), 0.1 (III) and 0.07 mol l^?1 (IV) at a current density of 10 A dm^?2 and electrolysis time 60 min. at 25 °C. Structural studies with a scanning electron microscope are given and a reaction mechanism for the electrolytic powder deposition is discussed.     

Behavior of cellulose graft copolymer towards persulphate oxidation. III. Poly(acrylonitrile) graft copolymers

Cotton cellulose was graft copolymerized with poly(acrylonitrile) to different levels. The copolymers so obtained together with the nongrafted cellulose were oxidized at different pH's (4–10) and temperatures (50–70°C) with potassium persulphate. The oxidation reaction was studied with respect to oxygen consumption, mass loss, and changes in copper number and carboxyl content of the cellulosic materials. It was found that the rates of oxidation at pH 4 for the copolymers are substantially higher than that of the nongrafted cellulose and the rate of oxidation is higher the higher the level of grafting. The reverse is the case at pH 10. The mass loss increases as the oxygen consumption increases irrespective of the substrate used and the pH employed. The magnitude of the mass loss is substantially lower in the case of grafted cellulose than in the case of nongrafted cellulose. The cellulosic copolymers with higher graft levels show lower mass loss than those having lower graft levels. However, the copper number and carboxyl content of the oxidized grafted cellulose are higher than those of the nongrafted cellulose at the same oxygen consumption. It is believed that the presence of poly(acrylonitrile) graft in the molecular structure of cellulose impedes cellulosic chain scission without necessarily preventing oxidation of cellulose hydroxyls.     

Grafting of nylon 66 with methyl methacrylate using dimethylaniline–benzyl chloride–acetic acid initiating system

Grafting of nylon 66 with methyl methacrylate (MMA) under the initiating influence of dimethylaniline (DMA)–benzyl chloride (BC)–acetic acid (AC) mixture was studied to discover optimal conditions for grafting. Results of this investigation showed that a mixture of water/ethanol at a ratio of 90:10 constitutes the most favorable medium for the grafting reaction. Optimal grafting occurred when a concentration of 0.16 mole/l. DMA plus 0.17 mole/l. BC plus 0.2 mole/l. AC was used. Using lower or higher concentrations of this initiator led to lower grafting. On the other hand, increasing MMA concentration brings about a significant increase in the graft yield. The same holds true for reaction time and temperature, though an induction period was observed at a lower temperature (65°C) and when lower monomer concentration (2%) was used.     

Graft copolymerization of vinyl monomers on modified cottons. VI. Vinyl graft copolymerization initiated by manganese (IV)

The ability of potassium permanganate in the presence of different acids to induce grafting of methyl methacrylate and acrylonitrile onto sodium hydroxide-treated cotton, partially carboxymethylated cotton, partially cyanoethylated cotton, and partially acetylated cotton was investigated. The copolymerization reaction was carried out under a variety of conditions. The graft yields are greatly enhanced by increasing concentration of monomer, reaction time, and temperature. The opposite holds true for initiator at higher concentrations. The effectiveness of the acids was: nitric acid > sulfuric acid > perchloric acid > hydrochloric acid. The change in the physical and/or chemical structure of cellulose by its modification via etherification reaction or esterification reaction had a significant effect on the susceptibility of cellulose toward grafting. While partial carboxymethylation or partial cyanoethylation of cellulose prior to grafting increased the graft yield, partial acetylation caused a decrease.     

Graft polymerization of methyl methacrylate onto wool using dimethylaniline/copper(II) system

Dimethylaniline (DMA)/Cu^II-induced grafting of methyl methacrylate (MMA) onto wool fibres was studied under different conditions. The grafting reaction was found to be influenced by Cu^II, DMA, and MMA concentrations as well as polymerization temperature, reaction time, and polymerization medium. While the graft yield increased by increasing the amount of MMA from 100 to 500 mmol/L, maximum grafting occurred at 0.5 mmol/L CuSO₄, 10 mmol/L DMA. The graft yield increased by increasing the reaction time from 15 to 150 min and by raising the polymerization temperature from 60 to 80°C. Using dimethylformamide/water and ethyl alcohol/water mixture as a medium for grafting decreased the graft yield, while using isopropyl alcohol/water mixtures increased the graft yield as compared to pure aqueous medium.     

Heat transfer and fluid flow characteristics in flash desalination units

The present work investigates the effects of different operating and geometrical parameters on the flashing efficiency of water in a single stage flashing chamber. This chamber uses a submerged rectangular orifice as flow control area. Experiments were performed to investigate the effects of flow rate, liquid level in the flashing chamber, liquid inlet temperature and flashing range, on the flashing efficiency under various design conditions. These comprise flow with baffle placed in the flashing chamber, and wire meshes placed at the orifice to increase the turbulence level.It was found that the efficiency increased with the increase of the turbulence levels, flashing range and liquid inlet temperature; the efficiency deceased with the increase of the flow rate and liquid level in the flashing chamber. The application of numerical procedure to predict flow pattern and heat transfer in the flashing chamber is introduced as a powerful design tool.     

Synthesis and properties of new poly(amide imide)s containing trimellitic rings and hydantoin moieties in the main chain under microwave irradiation

Trimellitic anhydride was reacted with 4,4′‐diaminodiphenyl ether in a mixture of acetic acid and pyridine (3 : 2) at room temperature and was refluxed at 90–100°C, and N,N′‐(4,4′‐diphenylether) bistrimellitimide (3) was obtained in a quantitative yield. 3 was converted into N,N′‐(4,4′‐diphenylether) bistrimellitimide diacid chloride (4) by a reaction with thionyl chloride. Then, six new poly(amide imide)s were synthesized under microwave irradiation with a domestic microwave oven through the polycondensation reactions of 4 with six different derivatives of 5,5‐disubstituted hydantoin in the presence of a small amount of a polar organic medium such as o‐cresol. The polycondensation proceeded rapidly and was completed within 7–10 min, producing a series of new poly(amide imide)s in high yields with inherent viscosities of 0.27–0.66 dL/g. The resulting poly(amide imide)s were characterized by elemental analysis, viscosity measurements, differential scanning calorimetry, thermogravimetric analysis, derivative thermogravimetry, solubility testing, and Fourier transform infrared spectroscopy. All the polymers were soluble at room temperature in polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and N‐methyl‐2‐pyrrolidone. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3447–3453, 2004     

油罐水高智能测量装置研究

原油在开采和加工过程中必须除去原油中的水分,以减少在输送和储存过程中的浪费,确保输送、加工过程中的安全。因此,油罐底部水在线监测对原油生产和管理具有重要意义。油罐水高智能测量装置通过石油密度计、浮球式液位仪、压力传感器的在线测得参数,利用这3个参数关系,通过PLC编程计算实现对油罐中油水混合状态下底部水高的在线实时自动监测。这对于在石油脱水和存储过程中及时排放罐底水提供技术支持。