Synthesis of the nitrogen-fixing enzyme system in oligonitrophilic bacteria

Oligonitrophilic bacteria were cultivated on a medium containing only 2.5--10.0 mg/litre of nitrogen compounds. They assimilated elementary nitrogen only after utilization of these nitrogen compounds during growth and formation of nitrogen-fixing enzyme system. Their cells grown on a medium containing high concentrations of bound nitrogen did not fix nitrogen during further incubation in the atmosphere of 15N; therefore, the enzymes involved in nitrogen fixation were induced. These organisms are characterized by diauxia during their growth on media containing "start" doses of nitrogen. Enzymes catalysing nitrogen fixation in azotobacter are also induced. But, contrary to oligonitrophilic bacteria, the azotobacter does not require nitrogen compounds in the medium in order to adapt to molecular nitrogen, and its growth curve is not of a biphasal character. These data and the evidence of other authors suggest that all nitrogen-fixing microorganisms are characterized by the induced, not constitutive, enzymes involved in reduction of molecular nitrogen.     

Effect of Cd Addition on Superconducting Fluctuations and Mechanical Properties of Bi1.82Pb0.36Sr2Ca2Cd x Cu3O y System

A study was made of the effect of Cd additions on the superconducting and mechanical properties of Bi_1.82Pb_0.36Sr₂Ca₂ Cd_xCu₃O_y (x = 0.0, 0.15, 0.25, 0.35 and 0.55). Characterization of the Cd-samples using XRD, DTA, and SEM techniques, has confirmed that remarkably formation of low-T _c phase (2212) by the addition of Cd up to 0.35. High-resolution electrical resistivity ρ (T) data on the composition of Cd = 0.35 have been taken for investigating critically the superconducting fluctuations. Using the Aslamazov and Larkin (AL) and Lawrence and Doniach (LD) models of excess conductivity. Excess conductivity analysis shows that this composition (Cd = 0.35) is 2D in the temperature range 137.8–163.7 K and a 3D one below 137.8 K. Thus, a crossover from 2D to 3D is observed at 137.8 K. Sample microhardness and density are greatly improved by Cd-additions (0.35). This trend is probably due to the intercalation of cadmium between superconducting grains in compositions may provide a plastic-flow region that allows relaxation of undesirable stresses resulting from the grain anisotropy of superconductors.     

Shape retention of injection molded stainless steel compacts

The effects of the binder composition, the powder loading, the thermal properties of feedstocks, and the injection molding parameters on the compact shape retention for metal injection molding 17-4PH stainless steel were investigated. The high-density polyethylene is more effective than ethylene vinyl acetate as a second component of the wax-based binder to retain compact shape due to its higher pyrolytic temperature and less heat of fusion. The compact distortion decreases with increasing the powder loading, molding pressure and molding temperature. There exists an optimal process combination including the powder loading of 68 %, molding pressure of 120 MPa and molding temperature of 150℃. Under this process condition, the percentage of distorted compacts is the lowest.     

Performance recovery under output feedback sampled-data stabilization of a class of nonlinear systems

This paper studies sampled-data output feedback control of a class of nonlinear systems. It is shown that the performance of a stabilizing continuous-time state feedback controller can be recovered by a sampled-data output feedback controller when the sampling period is sufficiently small. The output feedback controller uses a deadbeat discrete-time observer to estimate the unmeasured states. Two schemes are proposed to overcome large initial transients when the controller is switched on.     

Photoconductivity and photoluminescence under bias in GaInNAs/GaAs MQW p-i-n structures

The low temperature photoluminescence under bias (PLb) and the photoconductivity (PC) of a p-i-n GaInNAs/GaAs multiple quantum well sample have been investigated. Under optical excitation with photons of energy greater than the GaAs bandgap, PC and PLb results show a number of step-like increases when the sample is reverse biased. The nature of these steps, which depends upon the temperature, exciting wavelength and intensity and the number of quantum wells (QWs) in the device, is explained in terms of thermionic emission and negative charge accumulation due to the low confinement of holes in GaInNAs QWs. At high temperature, thermal escape from the wells becomes much more dominant and the steps smear out.     

The benefits of the transition from fossil fuel to solar energy in Libya: A street lighting system case study

The Libyan economy is dominated by the oil and the gas industry which are considered as the primary energy sources for the generating power plants. With the increased energy demands in the near future, Libya will be forced to burn more oil and gas. This, in turn will result in reducing the country revenue, threatening the economy and increasing the CO₂ emission. This triggers the alarm for Libya to an urgent plan to diversify the energy sources through using sustainable energy. The sun showers Libya every day by a huge amount of sunshine, especially during the peaks in the summer days. Recently, the country has been struggling to satisfy its escalating energy demands. The residential and street lighting loads constitute more than 50% of the electricity demands in Libya. Street lighting consumes more than 3.996 TW h, which is around one fifth of the energy demands in Libya. Energy conservation and transition from fossil fuel to renewable energy could have significant profit on the energy sector in Libya. For example, Libya is still relying on the old-fashioned, inefficient and unsustainable street lighting systems. Replacing the old technology lighting systems with up-to-date solar powered lighting system can achieve energy saving and sustainability. In this paper, improving the energy situation in Libya through replacing the high pressure sodium street lighting systems with solar powered LED street lighting systems is investigated. A four km road is chosen as a case study. Four alternatives are analyzed; grid-powered high pressure sodium lamp street lighting system, grid-powered LED lamp street lighting system, stand-alone solar powered LED street lighting system and grid-connected solar powered LED street lighting system. The four options are compared in terms of the capital cost, maintenance cost, total cost, fuel cost and the CO₂ emission. Replacing the high pressure sodium lamp system with LED lamp system saves 75% of energy and reduces the CO₂ emission by 75%. The stand-alone solar powered LED lighting system cuts the CO₂ emission, saves the fuel and is economically feasible. Furthermore, improvement is attained if the solar powered lighting system is connected to the grid where the excess energy is fed to the grid. The two solar powered options are economically feasible and sustainable.     

Extraction,optimisation and characterisation of phenolics from Thymus vulgaris L.: phenolic content and profiles in relation to antioxidant,antidiabetic and antihypertensive properties

The objectives of this study were to examine varying extraction conditions of Thymus vulgaris L. as related to phenolic content and profiles of the extracts and their antioxidant, antihypertensive and antidiabetic properties. Phenolics were extracted under various conditions pertaining to free and bound phenolics, solvent type and combination of extraction time and temperature, and these extracts were evaluated in terms of their antioxidant activities and inhibitory activities of angiotensin‐converting enzyme (ACE), α‐glucosidase and α‐amylase. The acetone–water solvent mixture (1:1; v/v) produced the extract with the greatest phenolic content, antioxidant activity and inhibitory activities of ACE and α‐glucosidase. The optimal extraction temperature for maximum phenolic content and antioxidant activity associated with methanol extraction was 60 °C, whereas a lower temperature at 40 °C was required to maximise inhibitory activities for ACE, α‐glucosidase and α‐amylase. An inverse relationship was seen between antioxidant and glucosidase inhibitory activities vs. the ACE and α‐amylase inhibitory activities, which suggests the need for extractions to be directed to specific bioactivities of thyme extracts. Generally, the results indicate major differences in phenolic profiles among the tested extraction conditions with thymol as the predominant phenolic seen in most extractions, while gallic acid, rosmarinic acid or diosmin also predominated in other extracts. Extracts with the same predominant phenolic compound and similar phenolic content showed major disparities in their ACE, glucosidase and α‐amylase inhibitory activities, indicating that the major phenolic profiles of thyme extracts may not be necessarily related to the degree of inhibition of ACE, glucosidase and α‐amylase enzymes.     

An experimental study on multi‐purpose desiccant integrated vapor‐compression air‐conditioning system

In this paper, a multi‐purpose hybrid desiccant integrated vapor‐compression air‐conditioning system of a small capacity is experimentally investigated. The system, referred as hybrid desiccant‐assisted air conditioner (HDAC), is designed to meet the cooling load of spaces having large latent heat portions and at the same time to extract water from atmospheric air. The system is mainly consisted of a liquid‐desiccant dehumidification unit integrated with a vapor‐compression system (VCS). The dehumidification unit uses lithium chloride (LiCl) solution as the working material. The effect of different parameters, such as desiccant solution flow rate, process airflow rate, evaporator and condenser temperatures, strong solution concentration and regeneration temperature on the performance of the system, is studied. This system has a water recovery rate of 6.7 l/h TR (1.91 l/h kW) of pure water at typical north Egyptian climate (20–30°C dry bulb and 35–45% relative humidity). The HDAC system has a COP as high as 3.8 (an improvement of about 68% over the conventional VCS). The system offers a total cooling capacity of about 1.75 TR (6.15 kW) using a 0.75 TR (2.6 kW) VCS unit. Finally, the proposed system is found to have a payback time of about 10 months without any considerable extra capital cost compared with the known split air‐conditioning system. The results emphasize the potential benefits of the HDAC system. Copyright © 2010 John Wiley & Sons, Ltd.     

Curcumin antifungal and antioxidant activities are increased in the presence of ascorbic acid

The objective of this study was to evaluate the antifungal and antioxidant activities of curcumin, ascorbic acid and the mixture of these two compounds. For the antifungal assay, the minimum inhibitory concentrations (MIC) were determined using Candida strains (ATCC and clinical isolates). Curcumin alone inhibited growth of Candida albicans yeast cells, whereas ascorbic acid did not present effects. However, when the mixture of ascorbic acid and curcumin was assayed to determine the association of the two compounds, the curcumin MIC decreased 5- to 10-fold. In the antioxidant assays, the sum of the alone activities of curcumin and ascorbic acid were lower than the activity of the two-compound mixture. This study highlights the importance of the association between two common antioxidants in foods, to improve the antifungal and antioxidant activities of curcumin (in vitro), and can be applied to Candida spp. infection and diseases associated with oxidative stress.