Towards a systematic description of the field using bibliometric analysis: malware evolution

Scientometrics - Malware is a blanket term for Trojan, viruses, spyware, worms, and other files that are purposely created to harm computers, mobile devices, or computer networks. Malware commonly...     

Cold-Active Lipases and Esterases: A Review on Recombinant Overexpression and Other Essential Issues

Cold environments characterised by diverse temperatures close to or below the water freezing point dominate about 80% of the Earth’s biosphere. One of the survival strategies adopted by microorganisms living in cold environments is their expression of cold-active enzymes that enable them to perform an efficient metabolic flux at low temperatures necessary to thrive and reproduce under those constraints. Cold-active enzymes are ideal biocatalysts that can reduce the need for heating procedures and improve industrial processes’ quality, sustainability, and cost-effectiveness. Despite their wide applications, their industrial usage is still limited, and the major contributing factor is the lack of complete understanding of their structure and cold adaptation mechanisms. The current review looked at the recombinant overexpression, purification, and recent mechanism of cold adaptation, various approaches for purification, and three-dimensional (3D) crystal structure elucidation of cold-active lipases and esterase.     

Locally Secreted Semaphorin 4D Is Engaged in Both Pathogenic Bone Resorption and Retarded Bone Regeneration in a Ligature-Induced Mouse Model of Periodontitis

It is well known that Semaphorin 4D (Sema4D) inhibits IGF-1-mediated osteogenesis by binding with PlexinB1 expressed on osteoblasts. However, its elevated level in the gingival crevice fluid of periodontitis patients and the broader scope of its activities in the context of potential upregulation of osteoclast-mediated periodontal bone-resorption suggest the need for further investigation of this multifaceted molecule. In short, the pathophysiological role of Sema4D in periodontitis requires further study. Accordingly, attachment of the ligature to the maxillary molar of mice for 7 days induced alveolar bone-resorption accompanied by locally elevated, soluble Sema4D (sSema4D), TNF-α and RANKL. Removal of the ligature induced spontaneous bone regeneration during the following 14 days, which was significantly promoted by anti-Sema4D-mAb administration. Anti-Sema4D-mAb was also suppressed in vitro osteoclastogenesis and pit formation by RANKL-stimulated BMMCs. While anti-Sema4D-mAb downmodulated the bone-resorption induced in mouse periodontitis, it neither affected local production of TNF-α and RANKL nor systemic skeletal bone remodeling. RANKL-induced osteoclastogenesis and resorptive activity were also suppressed by blocking of CD72, but not Plexin B2, suggesting that sSema4D released by osteoclasts promotes osteoclastogenesis via ligation to CD72 receptor. Overall, our data indicated that ssSema4D released by osteoclasts may play a dual function by decreasing bone formation, while upregulating bone-resorption.     

Synthesis,characterization, and cure reaction of methacrylate‐based multifunctional monomers for dental composites

The synthesis of 2,2‐bis[(4‐(2‐hydroxy‐3‐methacryloxyethoxy)phenyl]propane (BHEP) and (1‐methacryloxy‐3‐ethoxymethacryloxy‐2‐hydroxy)propane (MEHP) for use as the monomer phase in dental composites are reported. The monomers were prepared by the reaction of 2‐hydroxyethyl methacrylate (HEMA) with diglycidyl‐ether of bisphenol A (DGEBA) and with glycidyl methacrylate (GMA), respectively. The progress of the reaction was followed by measuring the disappearance of the epoxide group peak using FTIR and the structure of the monomers was characterized by ¹H‐NMR. BHEP and MEHP have lower viscosity because of the presence of long aliphatic spacer on both sides of the aromatic ring in BHEP and the absence of aromatic rings and the presence of only one hydroxyl group in each molecule of MEHP. Thermal curing of the monomers was conducted in a DSC using benzoyl peroxide as an initiator. Photopolymerization of the monomers was also conducted with the visible light using camphorquinone and N,N‐dimethylaminoethyl methacrylate as the photoinitiating system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis of zinc oxide nanostructures on graphene/glass substrate by electrochemical deposition: effects of current density and temperature

The electrochemical growth of zinc oxide (ZnO) nanostructures on graphene on glass using zinc nitrate hexahydrate was studied. The effects of current densities and temperatures on the morphological, structural, and optical properties of the ZnO structures were studied. Vertically aligned nanorods were obtained at a low temperature of 75°C, and the diameters increased with current density. Growth temperature seems to have a strong effect in generating well-defined hexagonal-shape nanorods with a smooth top edge surface. A film-like structure was observed for high current densities above -1.0 mA/cm² and temperatures above 80°C due to the coalescence between the neighboring nanorods with large diameter. The nanorods grown at a temperature of 75°C with a low current density of -0.1 mA/cm² exhibited the highest density of 1.45 × 10⁹ cm^-2. X-ray diffraction measurements revealed that the grown ZnO crystallites were highly oriented along the c-axis. The intensity ratio of the ultraviolet (UV) region emission to the visible region emission, I_UV/I_VIS, showed a decrement with the current densities for all grown samples. The samples grown at the current density below -0.5 mA/cm² showed high I_UV/I_VIS values closer to or higher than 1.0, suggesting their fewer structural defects. For all the ZnO/graphene structures, the high transmittance up to 65% was obtained at the light wavelength of 550 nm. Structural and optical properties of the grown ZnO structures seem to be effectively controlled by the current density rather than the growth temperature. ZnO nanorod/graphene hybrid structure on glass is expected to be a promising structure for solar cell which is a conceivable candidate to address the global need for an inexpensive alternative energy source.     

A comparative study of the corrosion inhibition of mild steel in sulphuric acid by 4,4-dimethyloxazolidine-2-thione

The corrosion protection of mild steel in a 2.5 M H₂SO₄ solution by 4,4-dimethyloxazolidine-2-thione (DMT) was studied at different temperatures by measuring changes in open circuit potential (OCP), potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS). Corrosion current densities calculated from EIS data were comparable to those obtained from polarisation measurements. Results showed that DMT inhibited mild steel corrosion in a 2.5 M H₂SO₄ solution and indicated that the inhibition efficiencies increased with the concentration of inhibitor, but decreased proportionally with temperature. Polarisation curves showed that DMT is a mixed-type inhibitor. Changes in impedance parameters suggested the adsorption of DMT on the mild steel surface, leading to the formation of protective films. The DMT adsorption on the mild steel surface followed the Langmuir adsorption isotherm. The kinetic and thermodynamic parameters for dissolution and adsorption were investigated. Comprehensive adsorption (physisorption and chemisorption) of the inhibitor molecules on the mild steel surface was suggested based on the thermodynamic adsorption parameters.     

Crystal structure of single phase and low sintering temperature of α-cordierite synthesized from talc and kaolin

Cordierite body with the formulation of 2.8MgO·1.5Al₂O₃·5SiO₂ was prepared from talc and kaolin as the basic raw materials. Following glass crystallization technique the glass powder was successfully heat treated at 900 °C for 2 h to form a single-phase α-cordierite. The crystal structure of α-cordierite was analysed using X-ray diffraction technique and the Rietveld structural refinement method. Differential thermal analysis (DTA), Fourier-transform infrared (FTIR), field emission scanning electron microscopy (FESEM), coefficient of thermal expansion (CTE) and dielectric properties were also performed. Results show that the materials crystallized as a hexagonal structure with space group of P6/mcc and the room temperature lattice parameters are a = 9.743742 (Å) and c = 9.389365 (Å). FTIR analysis on the glass revealed that only silicate species is the only unit that exists in the glass network. DTA also confirmed that α-cordierite completely formed after 13.5 min of isothermal heating at 900 °C. Coefficient of thermal expansion of synthesized α-cordierite is 2.5 × 10⁻⁶ °C⁻¹. The dielectric constant is between 5.0 and 5.5 for 1 MHz and 1.8 GHz, respectively, and the dielectric loss is in the range 10⁻². FESEM micrographs revealed that the material is fully densified.     

Intumescent flame retardant polyurethane/starch composites: Thermal,mechanical, and rheological properties

Intumescent flame retardant polyurethane/starch (IFRPU/starch) composites were prepared by means of melt blending. Microencapsulated ammonium polyphosphate (MCAPP) was added to improve its compatibility with matrix, retardation of reaction between acid and carbon source, and its water resistancy. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of hydrogen bonding and entangled network between IFR system and PU matrix. Further, scanning electron microscopy (SEM) illustrated homogeneity of starch in matrix. By addition of 10 wt % of starch and 20 wt % of IFR, limiting oxygen index (LOI) increased from 22.0 to 40.0 and UL94 V0 rating was achieved. Differential scanning calorimetry (DSC) detected three endothermic transitions and one glass transition (T_g). The temperature of transition III and T_g increased with starch due to crosslinking between PU and starch. The improved thermal stability in the presence of starch was confirmed by thermogravimetric analysis (TGA). Beside the fact that starch was used as a carbonization agent to improve flame retardancy, it also effectively led to enhanced mechanical and viscoelastic properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41158.     

Design optimisation of high sensitivity MEMS piezoresistive intracranial pressure sensor using Taguchi approach

Microsystem Technologies - MEMS piezoresistive pressure sensors have been contemporarily used to measure intracranial pressure. Since an intracranial signal is of the pulsating type, the...     

Rock strength estimation: a PSO-based BP approach

Application of back-propagation (BP) artificial neural network (ANN) as an accurate, practical and quick tool in indirect estimation of uniaxial compressive strength (UCS) of rocks has recently been highlighted in the literature. This is mainly due to difficulty in direct determination of UCS in laboratory as preparing the core samples for this test is troublesome and time-consuming. However, ANN technique has some limitations such as getting trapped in local minima. These limitations can be minimized by combining the ANNs with robust optimization algorithms like particle swarm optimization (PSO). This paper gives insight into development of a hybrid PSO–BP predictive model of UCS. For this reason, dataset comprising the results of 228 laboratory tests including dry density, moisture content, P wave velocity, point load index test, slake durability index and UCS was prepared. These tests were conducted on 38 sandstone samples which were taken from two excavation sites in Malaysia. Findings showed that PSO–BP model performs well in predicting UCS. Nevertheless, to compare the prediction performance of the PSO–BP model, the UCS is predicted using ANN-based PSO and BP models. The correlation coefficient, R, values equal to 0.988 and 0.999 for training and testing datasets, respectively, suggest that the PSO–BP model outperforms the other predictive models.