Barrier layer effect of tantalum on the electromigration in sputtered copper films on hydrogen silsesguioxane and SiO2

As IC devices scale down to the submicron level, the resistance-capacitance (RC) time delays are the limitation to circuit speed. A solution is to use low dielectric constant materials and low resistivity materials. In this work, the influence of underlying barrier Ta on the electromigration (EM) of Cu on hydrogen silsesquioxane (HSQ) and SiO₂ substrates was investigated. The presence of a Ta barrier not only improves the adhesion between Cu and dielectrics, but also enhances the crystallinity of Cu film and improves the Cu electromigration resistance. The activation energy obtained suggests a grain boundary migration mechanism and the current exponent calculated indicates the Joule heating effect.     

Fiber-optic confocal reflectance microscope with miniature objective for in vivo imaging of human tissues

We have built a fiber-optic confocal reflectance microscope capable of imaging human tissues in near real time. Miniaturization of the objective lens and the mechanical components for positioning and axially scanning the objective enables the device to be used in inner organs of the human body. The lateral resolution is 2 micrometers and axial resolution is 10 micrometers. Confocal images of fixed tissue biopsies and the human lip in vivo have been obtained at 15 frames/s without any fluorescent stains. Both cell morphology and tissue architecture can be appreciated from images obtained with this microscope.     

Fast locking delay-locked loop using initial delay measurement

A delay-locked loop (DLL) architecture capable of incorporating fast locking and low jitter features simultaneously is reported. A test chip was fabricated in a 0.6 μm CMOS process to prove its functionality. The proposed DLL can align the internal clock to the external reference clock within two cycles and maintain its locking state with the aid of feedback operation     

Visual Cryptography Based on an Interferometric Encryption Technique

This paper presents a new method for a visual cryptography scheme that uses phase masks and an interferometer. To encrypt a binary image, we divided it into an arbitrary number of slides and encrypted them using an XOR process with a random key or keys. The phase mask for each encrypted image was fabricated under the proposed phase‐assignment rule. For decryption, phase masks were placed on any path of the Mach‐Zehnder interferometer. Through optical experiments, we confirmed that a secret binary image that was sliced could be recovered by the proposed method.     

A Surface Tailoring Method of Ultrathin Polymer Gate Dielectrics for Organic Transistors: Improved Device Performance and the Thermal Stability Thereof

Tailoring the surface of the dielectric layer is of critical importance to form a good interface with the following channel layer for organic thin film transistors (OTFTs). Here, a simple surface treatment method is applied onto an ultrathin (<15 nm) organosilicon‐based dielectric layer via the initiated chemical vapor deposition (iCVD) to make it compatible with organic semiconductors without degrading its insulating property. A molecular‐thin oxide capping layer is formed on a 15 nm thick poly(1,3,5‐trimetyl‐1,3,5‐trivinyl cyclotrisiloxane) (pV3D3) by a brief oxygen plasma treatment. The capping layer greatly enhances the thermal stability of the dielectrics, without degrading the original mechanical flexibility and insulating performance of the dielectrics. Moreover, the surface silanol functionalities formed by the plasma treatment can also be utilized for the surface modification with silane compounds. The surface‐modified dielectrics are applied to fabricate low‐voltage operating (<5 V) pentacene‐based OTFTs. The highest field‐effect mobility of the device with the surface‐treated 15 nm thick pV3D3 is 0.59 cm² V^?1 s^?1, which is improved up to two times compared to the TFT with the pristine pV3D3. It is believed that the simple surface treatment method can widely extend the applicability of the highly robust, ultrathin, and flexible pV3D3 gate dielectrics to design the surface of the dielectrics to match well various kinds of organic semiconductors.     

Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium Batteries

Li[Ni_0.65Co_0.13Mn_0.22]O₂ cathode with two‐sloped full concentration gradient (TSFCG), maximizing the Ni content in the inner part of the particle and the Mn content near the particle surface, is synthesized via a specially designed batch‐type reactor. The cathode delivers a discharge capacity of 200 mAh g^?1 (4.3 V cutoff) with excellent capacity retention of 88% after 1500 cycles in a full‐cell configuration. Overall electrochemical performance of the TSFCG cathode is benchmarked against conventional cathode (CC) with same composition and commercially available Li[Ni_0.8Co_0.15Al_0.05]O₂ (NCA). The TSFCG cathode exhibits the best cycling stability, rate capability, and thermal stability of the three electrodes. Transmission electron microscopy analysis of the cycled TSFCG, CC, and NCA cathodes shows that the TSFCG electrode maintains both its mechanical and structural integrity whereas the NCA electrode nearly pulverizes due to the strain during cycling.     

Interconnection Technology Based on InSn Solder for Flexible Display Applications

A novel interconnection technology based on a 52InSn solder was developed for flexible display applications. The display industry is currently trying to develop a flexible display, and one of the crucial technologies for the implementation of a flexible display is to reduce the bonding process temperature to less than 150°C. InSn solder interconnection technology is proposed herein to reduce the electrical contact resistance and concurrently achieve a process temperature of less than 150°C. A solder bump maker (SBM) and fluxing underfill were developed for these purposes. SBM is a novel bumping material, and it is a mixture of a resin system and InSn solder powder. A maskless screen printing process was also developed using an SBM to reduce the cost of the bumping process. Fluxing underfill plays the role of a flux and an underfill concurrently to simplify the bonding process compared to a conventional flip‐chip bonding using a capillary underfill material. Using an SBM and fluxing underfill, a 20 μm pitch InSn solder SoP array on a glass substrate was successfully formed using a maskless screen printing process, and two glass substrates were bonded at 130°C.     

Effects of Nd2O3 and TiO2 Addition on the Microstructures and Microwave Dielectric Properties of BaO-Nd2O3-TiO2 System

The effects of Nd₂O₃ and TiO₂ addition on the microstructures and microwave dielectic properties of BaO-Nd₂O₃-TiO₂ system were investigated. BaNd₂Ti₄O₁₂ or BaNd₂Ti₅O₁₄ phases were observed for compositions based on BaO/Nd₂O₃ = 1 ratio. The compositions deviated from BaO/Nd₂O₃ = 1 ratio were composed of major phases of BaNd₂Ti₄O₁₂ or BaNd₂Ti₅O₁₄, and the compound of Nd₂O₃ and TiO₂ (Nd₂Ti₂O₇) or that of BaO and TiO₂ (BaTi₄O₉). The microstructure of ceramic with BaO·Nd₂O₃ ·4TiO₂ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing Nd₂O₃, the optimum sintering temperature with maximum density increased, and the dielectric constant( · _r) and quality factor(Q) decreased due to the formation of secondary phases. With increasing TiO_2/ the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ·_f shifted toward positive direction. The dielectric ceramics with BaO/Nd₂O₃ = 1 showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.     

Threshold‐Based Camera Motion Characterization of MPEG Video

We propose an efficient scheme for camera motion characterization in MPEG‐compressed video. The proposed scheme detects six types of basic camera motions through threshold‐based qualitative interpretation, in which fixed thresholds are applied to motion model parameters estimated from MPEG motion vectors (MVs). The efficiency and robustness of the scheme are validated by the experiment with real compressed video sequences.     

A reconfigurable microstrip antenna for switchable polarization

A novel reconfigurable microstrip antenna with switchable polarization sense is proposed. The proposed antenna has a simple structure, consisting of a corner-truncated square radiating patch, four small triangular conductors, and a microstrip line feed. Using independently biased PIN diodes on the patch, it can produce linear polarization, or left- or right-hand circular polarization according to bias voltages. From the measured results, low cross-polarization levels when operated in the linear state and good axial ratios in the circular state are observed.