Ideal crosslinked-polymers and their characterization in free-radical monovinyl-divinyl copolymerizations

The critical conditions in which the classical Flory-Stockmayer gelation theory (F-S theory) is applicable to monovinyl-divinyl copolymerizations were pursued in detail. The resulting prepolymers or precursors of ideal crosslinked-polymers were characterized as standard polymers for the discussion of network formation in free-radical monovinyl-divinyl copolymerizations. Methyl methacrylate was copolymerized with a small amount of ethylene dimethacrylate, butylene dimethacrylate or nonapropyleneglycol dimethacrylate in the presence of lauryl mercaptan, a chain transfer agent to reduce the occurrence of a thermodynamic excluded volume effect and intramolecular crosslinking as the primary and secondary factors, respectively, for the greatly delayed gelation in the free-radical monovinyl-divinyl copolymerizations and, moreover, to keep the primary chain length constant by inhibiting a gel effect. The ratio of the actual gel point to the theoretical one reached 1.1, supporting the validity of F-S theory. The resulting prepolymers were subjected to SEC-MALLS analysis to determine the molecular weights, the molecular-weight distributions and the radii of gyration; the correlations of molecular weight vs. elution volume and radius of gyration vs. molecular weight were useful for the characterization of the precursors of ideal network-polymers.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

Growth Morphology and Mechanism of a Hollow ZnO Polycrystal

When zinc oxide and graphite were placed into an alumina crucible, with a square hole (∼3 mm ×∼3 mm) near the top, and the crucible was covered by an alumina lid and heated at >1050°C, a hollow polycrystal composed of needlelike, ribbon(comb)-like, dendritic, and bulk zinc oxide crystals grew from the hole toward the outside of the crucible. The diameter and length of the polycrystal grown at 1050°C after 1 h were ∼2.2 mm and ∼20 cm, respectively. The diameter increased, while the length decreased, with increasing temperature. Most of the needlelike zinc oxide crystals in the hollow polycrystal were elongated along the c -axis.     

Online-Religion in Japan: Websites and Religious Counseling from a Comparative Cross-Cultural Perspective

This article considers the nature of online religion by examining the websites and religious counseling activities conducted by new Japanese religions. Beginning with an overview of the widespread use of the Internet in Japan and its use in religion, the article examines the cultural and social factors that keep the religious use of the Internet from becoming as pervasive in Japan as it is in the U.S. The article then describes a website with elements of online religion and the Internet-based religious counseling services being provided by ministers of the new Shintō-derived religions of Konkōkyō and Tenrikyō. These activities have successfully given some people who need religious assistance access to religious teaching. In concluding, the article examines the reasons for the success of these efforts, as well as the reasons why they have not expanded in scope, in light of the cultural and organizational advantages and disadvantages that affect Internet use.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

A lightweight sensing method of tooth-touch sound for disabled person using remote controller

To support disabled people to use remote controllers, several biological signals are used. The tooth-touch is one of desirable biological signals. This is because it is the simple and natural human behavior. However, a sophisticated signal processing to extract only the tooth-touch sound is needed since the tooth-touch sound is mixed with the voice sound. This paper proposes a lightweight sensing method extracting the tooth-touch without a sophisticated signal processing to eliminate only voice sound from the sound wave in which tooth-touch and voice are mixed. Instead of the audible sound wave, proposal uses a shock wave (i.e., ultrasonic wave) which is generated when the upper tooth and the lower tooth hit each other. Using the shock wave generated to detect the tooth-touch, a trivial high-pass filter can eliminate only voice sound in the lower frequency domain than in the ultrasonic domain including the tooth-touch. Through a preliminary experiment that uses a conventional microphone and well-known digital high-pass filter, we show that the used electret microphone can sense the tooth-touch as ultrasonic wave and the high-pass filter can extract only tooth-touch. Then, we show some robustness of our method by using the sound waves including the voice and tooth-touch. In addition, we design the filtering hardware to implement a small and cheap system-on-chip achieving a real-time operation. Through the implementation of Field Programmable Gate Array, and the simulation, we show that our hardware is small and performs well for a real-time operation.     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Pulsed NMR study in nuclear ordered solid3He

The nuclear spin dynamics in nuclear spin ordered solid³He in low magnetic fields on the melting curve has been studied by pulsed NMR down to 0.6 mK. The free induction decay signals (FID) were measured in single crystals of solid³He at three operating frequencies of 920, 1380, and 1840 kHz. The FIDs were nonexponential and dependent on the rf pulse strength _p H ₁ t _w , where is the gyromagnetic ratio,H ₁ is the rf field strength, andt _w is the pulse width. At small _p they decayed almost linearly in time with a small exponential tail at the end. When _p was further increased they became shorter and neither exponential nor linear in time. At large _p they decayed very rapidly and sometimes could not be observed at all because of the dead time of the NMR detection system. Such behavior of the FID was observed in many different single crystals in the given temperature range at 920 kHz. Tsubota and Tsuneto have shown by solving the nonlinear equations of motion numerically that the motion of the nuclear spin becomes chaotic when the tipping angle exceeds a critical value. Comparing their result with our experimental results, we concluded that some of the results of the rapid decay of the FID at large _p might be attributed to the onset of the chaotic motion. At 1840 kHz it is expected that the nonlinear effects in the equations of motion become less effective than that at 920 kHz. In fact, at this operating frequency the FIDs even at large _p and the tipping angle-dependent frequency shift could be observed. These frequency shifts were in rather good agreement with Namaizawa's theory provided an effective tipping angle was taken into account.     

Shock consolidation of diamond powders

Fine and coarse diamond powders were shock-compacted at peak pressures of 77, 90, and 108 GPa. The densification and consolidation mechanisms of diamond powders under shock compression were investigated. The densification behaviour of the diamond powders depended strongly on the particle size of the starting materials. Fine diamond powders were densified primarily by plastic deformation, while coarse diamond powders were densified mainly by particle fracture. The relative densities of the compacted diamond samples increased with an increase in the initial particle size of the diamond and with shock pressure. The consolidation mechanism of the diamond powders under shock compression was closely related to the densification mechanism, and depended on the initial particle size of the diamond. At a shock pressure of 90 GPa, particle sizes of 2 to 4 m grade and 10 to 20 m grade were desirable as the starting material in order to produce well-bonded diamond compacts. Diamond compacts having microhardness values over 80 GPa were obtained from 2 to 4 m grade and 10 to 20 m grade diamond powders at a shock pressure of 90 G Pa, and their relative densities were 88.5% and 91.0%, respectively.