Magnetic properties of directionally solidified Bi-Mn alloys

Microstructure, composition and magnetic property correlations have been attempted for directionally solidified dilute Bi-Mn alloys. The ingots exhibited predominantly acicular BiMn precipitate particles in a bismuth matrix, and showed magnetic anisotropy along the direction of solidification. The saturation magnetization has been found to increase linearly with the weight percentage of manganese over the entire composition range investigated, starting from the hypoeutectic (0.15% Mn) to the hypereutectic (6.6% Mn) region. The intrinsic coercivity has been observed to be a maximum along the direction of solidification, but it decreased with manganese content in both the as-cast and the directionally solidified alloys. The results are discussed in terms of the crystal anisotropy, shape anisotropy and packing factor of the magnetic particles.     

Serological study of Japanese encephalitis in Nepal

Antibodies against Japanese encephalitis virus (JEV) were examined in 356 serum samples from individuals visiting Tribhuvan University Teaching Hospital using neutralization test. A total of 13.2% (47/356) seropositivity was observed. Antibody positivity against both Nakayama-NIH and Beijing-1 strains was seen in 7.9% subjects. Infection by Nakayama-NIH strain alone was seen to be 4.2% while 1.1% of study populations were found to be infected only by Beijing-1 strain. High antibody titer was observed in the 20-40 years age-group and did not increase with age. Seropositivity was more common in zone-A (Tarai) area compared to zone-B (Hills) and zone-C (Mountains). Spectrum of antigenicity of JEV in zone-A as shown by neutralization test was identical to Indian isolates (strains). Difference in seropositivity was observed against Nakayama-NIH and Beijing-1 strain in zone-B and C indicating recent spread of JEV in these areas.     

Influence of sludge disintegration by high pressure homogenizer on microbial growth in sewage sludge: an approach for excess sludge reduction

Excess sludge treatment and disposal is currently a challenge in wastewater treatment plant due to socio-economic and environmental regulation factors. Therefore, it is necessary to explore and develop technology for reduction of excess sludge in wastewater treatment plants rather than treating the generated sludge. This paper discusses technologies for excess sludge growth reduction using high pressure homogenizer treatment which causes cell lysis. The cell lysis and the microbial cellular maintenance energy requirement increases as a result of applied stress. This causes the energy required for non-growth reactions to increase with simultaneous increase in substrate conversion into carbon dioxide rather than microbial cell multiplication.     

Isothermal Grain Growth Studies on Nanostructured 9Cr-1Mo and 9Cr-1W Ferritic Steels Containing Nano-sized Oxide Dispersoids

Analysis of isothermal grain growth kinetics of nanocrystalline Fe-9Cr-1Mo and Fe-9Cr-1W-based ferritic oxide dispersion strengthened alloys is reported. Fe-9Cr-1Mo-0.25Ti-0.5Y₂O₃ alloy exhibited ~900 and ~250 pct enhancement in grain-coarsening resistance at 1073 K (800 °C) in comparison with Fe-9Cr-1Mo-0.5Y₂O₃ alloy and Fe-9Cr-1W-0.5Y₂O₃ alloy, respectively. Comparison of grain growth time exponents also revealed that addition of Ti and Y₂O₃ to nanocrystalline Fe-9Cr alloy has significantly enhanced the grain growth resistance. This is attributed to the possible presence of Y-Ti-O-based nanoclusters (<5 nm).     

Processing of Alumina-Rich Iron Ore Slimes: Is the Selective Dispersion–Flocculation–Flotation the Solution We Are Looking for the Challenging Problem Facing the Indian Iron and Steel Industry?

Beneficiation of alumina rich iron ore slimes is a major challenge for the Indian iron ore industry. Considering the limits of gravity and magnetic separation processes in the relatively finer size range in terms of achieving adequate separation efficiency, selective flotation (with and without selective flocculation) of iron ore slimes, which is being used commercially in several countries for the beneficiation of iron ores, is worth exploring for the beneficiation of Indian iron ores. Based on the extensive work carried out in our laboratories, we have concluded that the design and development of highly selective reagents to achieve satisfactory separation of hematite and goethite from alumina containing minerals (gibbsite or kaolinite) in the ore and ore slimes, is the key to solving the challenging problem of processing alumina rich iron ores. Accordingly our research work has been focused on finding/designing selective reagents for iron oxide–gibbsite–kaolinite separation based on a molecular modeling computational approach developed by us for the design of mineral processing reagents. We present in this paper the results of our density functional theory computations to evaluate the interaction energies of a wide variety of different reagent functional groups such as carboxylic acid, hydroxamic acid, phosphonic acid, iminobismethyl phosphoric acid, xanthate and starch with hematite, gibbsite and kaolinite surfaces. Among all the reagents investigated so far, starch exhibits the highest selectivity towards the hematite surface with a difference in interaction energy of ~63 kcal/mol between hematite and gibbsite surfaces. Based on our earlier work which indicated polyvinyl pyrrolidone (PVP) to be more selective dispersant for kaolinite compared to conventional sodium silicate and sodium hexametaphosphate, we have investigated selective flocculation–dispersion of natural iron ore slimes (three different samples obtained from three different mines in India) with PVP and starch reagent combination. The results are promising. While the work is still in progress, the implications of our recent results are discussed in the context of the challenging problem of processing of alumina rich iron ore slimes in India.     

Phase Transformation Studies in U–xZr (x = 2, 5, 10 wt%) Alloys Using Dynamic Calorimetry

The thermo-kinetics aspects of phase transformations in U rich U–xZr binary alloys, with x = 2, 5 and 10 wt% Zr have been investigated using dynamic calorimetry. The on-heating and cooling transformations at controlled scan rates in the range, 1–99 K min^?1, have been monitored and the following transformation sequence is obtained at slow heating (3 K min^?1) of a U–2Zr alloy: (i) α or α′ (distorted orthorhombic martensite) + δ(UZr₂) → α + γ₂ (bcc phase enriched in Zr); (ii) α + γ₂ → β (tetragonal) + γ₂; (iii) β + γ₂ → β + γ₁ (bcc phase enriched in U); (iv) β + γ₁ → γ; (v) γ (bcc) → liquid (melting). Similar transformation sequence for other compositions with varying enthalpy effects has been witnessed for 5 and 10 Zr alloys. The observed transformation characteristics are rationalized for the effect of Zr content and heating/cooling rate variations.     

On the prediction of groundwater mound formation due to transient recharge from a rectangular area

Recharge to the aquifer leads to the growth of a groundwater mound. Therefore, for the proper management of an aquifer system, an accurate prediction of the spatio-temporal variation of the water table is very essential. In this paper, a problem of groundwater mound formation in response to a transient recharge from a rectangular area is investigated. An approximate analytical solution has been developed to predict the transient evolution of the water table. Application of the solution and its sensitivity to the variation of the recharge rate have been illustrated with the help of a numerical example.Notations a = Kh/e [L²/T] - A = aquifer's extent in the x-direction [L] - B = aquifer's extent in the y-direction [L] - e = effective porosity - h = variable water table height [L] - h ₀= initial water table height [L] - h = weighted mean of the depth of saturation [L] - K = hydraulic conductivity [L] - m, n = integers - P = constant rate of recharge [L/T] - P ₁+P₀= initial rate of transient recharge [L/T] - P ₁= final rate of transient recharge [L/T] - s = h ²–h ₀ ² [L²] - t = time of observation [T] - x,y = space coordinates - x ₂–x₁= length of recharge area in x-direction [L] - y ₂–y₁= width of recharge area in y-direction [L] - z = decay constant [T^-1]     

Randomised controlled trial of aspirin and aspirin plus heparin in pregnant women with recurrent miscarriage associated with phospholipid antibodies (or antiphospholipid antibodies)

OBJECTIVE: To determine whether treatment with low dose aspirin and heparin leads to a higher rate of live births than that achieved with low dose aspirin alone in women with a history of recurrent miscarriage associated with phospholipid antibodies (or antiphospholipid antibodies), lupus anticoagulant, and cardiolipin antibodies (or anticardiolipin antibodies). DESIGN: Randomised controlled trial. SETTING: Specialist clinic for recurrent miscarriages. SUBJECTS: 90 women (median age 33 (range 22-43)) with a history of recurrent miscarriage (median number 4 (range 3-15)) and persistently positive results for phospholipid antibodies. INTERVENTION: Either low dose aspirin (75 mg daily) or low dose aspirin and 5000 U of unfractionated heparin subcutaneously 12 hourly. All women started treatment with low dose aspirin when they had a positive urine pregnancy test. Women were randomly allocated an intervention when fetal heart activity was seen on ultrasonography. Treatment was stopped at the time of miscarriage or at 34 weeks' gestation. MAIN OUTCOME MEASURES: Rate of live births with the two treatments. RESULTS: There was no significant difference in the two groups in age or the number and gestation of previous miscarriages. The rate of live births with low dose aspirin and heparin was 71% (32/45 pregnancies) and 42% (19/45 pregnancies) with low dose aspirin alone (odds ratio 3.37 (95% confidence interval 1.40 to 8.10)). More than 90% of miscarriages occurred in the first trimester. There was no difference in outcome between the two treatments in pregnancies that advanced beyond 13 weeks' gestation. Twelve of the 51 successful pregnancies (24%) were delivered before 37 weeks' gestation. Women randomly allocated aspirin and heparin had a median decrease in lumbar spine bone density of 5.4% (range -8.6% to 1.7%). CONCLUSION: Treatment with aspirin and heparin leads to a significantly higher rate of live births in women with a history of recurrent miscarriage associated with phospholipid antibodies than that achieved with aspirin alone.