A comparative study of the electrical and mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown multi-wall carbon nanotubes

In this study, three different types of multi-wall carbon nanotubes (MWCNTs) were compared as nanostructured reinforcements in epoxy polymers: commercially available CVD-MWCNTs, synthesised in an industrial process, aligned-CVD-MWCNTs and arc-grown MWCNTs, both obtained from a lab-scale processes. The nanocomposite properties were characterised by means of electron microscopy, rheological, electrical and mechanical methods. Industrial CVD-MWCNTs are favourable for the implication of an electrical conductivity in the epoxy due to their high tendency to form conducting networks. The less entangled structure of aligned-CVD-MWCNTs turns out to be favourable for an easy dispersion and low viscosity in epoxy at similar conductivities compared to the CVD-MWCNTs. Additionally, they provide the highest increase in fracture toughness (∼17%). Arc-grown MWCNTs do not offer any electrical conductivity in epoxy without sufficient purification methods. Their high level of impurities and short length further complicate the transfer of their good electrical and mechanical properties into the nanocomposite.     

Relations between anxiety sensitivity, distress tolerance, and fear reactivity to bodily sensations to coping and conformity marijuana use motives among young adult marijuana users.

The present investigation examines anxiety sensitivity, distress tolerance, and fear reactivity to bodily sensations in relation to Coping and Conformity marijuana use motives among a sample of young adult marijuana users (n = 135; 46.7% women; Mage = 20.45, SD = 5.0). After controlling for current marijuana use frequency (past 30 days), daily cigarette smoking rate, average volume of alcohol used over the past year, negative affectivity, and other marijuana use motives, anxiety sensitivity was significantly and uniquely associated with Coping and Conformity motives for marijuana use. Distress tolerance evidenced significant and unique incremental relations to Coping motives, whereas fear reactivity to bodily sensations was unrelated to any marijuana use motive. These results provide novel information related to the role of emotional sensitivity and tolerance factors as they pertain to specific types of motives for marijuana use among young adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Social environment of the church and feelings of gratitude toward god.

The purpose of this study was to see whether the social environment of the church is associated with changes in feelings of gratitude toward God over time. The theoretical thrust of the authors’ analyses is captured in the following conceptual linkages: (a) People who attend church frequently are more likely to believe that their congregation is highly cohesive; (b) individuals who worship in more cohesive congregations will receive more emotional support from fellow church members; (c) people who receive more emotional support from coreligionists will be more likely to feel they have a close spiritual connection with others; and (d) people who feel they are closely connected with other individuals will feel especially grateful to God. Data from a nationwide longitudinal survey of older adults provide support for each of these hypothesized relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Effect of Gradual Fluorination on the Properties of FnZnPc Thin Films and FnZnPc/C60 Bilayer Photovoltaic Cells

Motivated by the possibility of modifying energy levels of a molecule without substantially changing its band gap, the impact of gradual fluorination on the optical and structural properties of zinc phthalocyanine (F_nZnPc) thin films and the electronic characteristics of F_nZnPc/C₆₀ (n = 0, 4, 8, 16) bilayer cells is investigated. UV–vis measurements reveal similar Q‐ and B‐band absorption of F_nZnPc thin films with n = 0, 4, 8, whereas for F₁₆ZnPc a different absorption pattern is detected. A correlation between structure and electronic transport is deduced. For F₄ZnPc/C₆₀ cells, the enhanced long range order supports fill factors of 55% and an increase of the short circuit current density by 18%, compared to ZnPc/C₆₀. As a parameter being sensitive to the organic/organic interface energetics, the open circuit voltage is analyzed. An enhancement of this quantity by 27% and 50% is detected for F₄ZnPc‐ and F₈ZnPc‐based devices, respectively, and is attributed to an increase of the quasi‐Fermi level splitting at the donor/acceptor interface. In contrast, for F₁₆ZnPc/C₆₀ a decrease of the open circuit voltage is observed. Complementary photoelectron spectroscopy, external quantum efficiency, and photoluminescence measurements reveal a different working principle, which is ascribed to the particular energy level alignment at the interface of the photoactive materials.     

Processing of wood plastic composites: The influence of feeding method and polymer melt flow rate on particle degradation

Spruce wood particle (WP)/polypropylene (PP) compounds were prepared in an internal mixer using different rotor speeds. To analyze the effect of feeding method on particle degradation, WP and PP were either fed as dry‐blend or WP was fed into the PP melt. To prevent melt freezing, pre‐heated WP were used as comparison to cold WP. In addition, WPs were compounded with different grades of PP or high‐density polyethylene (HDPE) to analyze the effect of polymer matrix melt flow rate (MFR) on particle degradation. Mixing behavior of compounds containing 30% and 70% (w/w) WP depended on feeding method, represented by a changing relation of final torque values. Feeding as dry‐blend and using pre‐heated particles led to stronger WP degradation. Degradation decreased with increasing polymer MFR. For PP compounds, particle degradation was stronger when containing 70% WP, for HDPE the difference due to WP content was only marginal. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43231.     

Microstructure of the HMX‐Based PBX KS32 after Mechanical Loading

Non‐destructive X‐ray diffraction techniques were applied in order to monitor the influence of mechanical and shock‐loading on the microstructure of the plastic‐bonded high explosive KS32. The investigations uncovered damage to embedded coarse HMX crystals and to the binder system HTPB‐IPDI. Damage to the crystals occurred already during the kneading process in terms of deformation twinning. On higher loading between 400 MPa (static) and 480 MPa (dynamic) also crystal fracture was observed. The change in the binder structure was found after both static and dynamic loading, but not in the cured, differently kneaded samples. Moreover, the change in binder structure after dynamic loading was verified by dynamic mechanical analysis, and interpreted as a partial damage of the binder rubber shell around the explosive particles. The results are compared to literature data from imaging techniques.     

Herstellung von Phenolharzen unter Verwendung von Stärkeprodukten

Usage of Starchy Products for Preparation of Phenolic Resins. Incorporation of starches and starch hydrolysates in phenolic resins of novolak and resol type has been investigated via acid catalyzed dehydration to 5-hydroxymethylfurfural (HMF) in the presence of phenol and formaldehyde. Due to formation of HMF/phenol-condensates savings up to 40% phenol and 65% formaldehyde are possible in comparison to commercial resins. Besides very low amounts of residual monomers, curing is accelerated with increased carbohydrate incorporation, which can be used to reduce time consuming manufacturing processes. Especially starch hydrolysates with different average molecular weights can be used in a very flexible way to achieve special requirements like softening points, mol weight distributions, viscosities and curing behaviour.     

Characteristics of wet‐spun and thermally treated poly acrylonitrile fibers

The performance of carbon fibers depends on the quality of the precursor and the conditions of the thermal treatment. In detail, for a PAN precursor fiber the viscosity of a spinning dope and the draw ratio during the spinning process needs to be considered. Through wet spinning, different types of PAN precursor fibers with defined spinning parameters, including solid content, solvent content in a bath, and especially draw ratio resulting in defined cross section diameters, were fabricated and analyzed with tensile tests, density investigations, SEM, TGA‐MS, FTIR, and XRD. The results show that the mechanical properties of the fibers correlate to crystallinity. The cross section diameter is strongly related to the morphology of the fibers after thermal treatment. By extending the postdrawing of PAN fibers high tenacities were obtained at the cost of the cross section shape. In addition, TGA measurements reveal trapped residues of the wet spinning process as well as show several chemical reactions takes place at the same time at different temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43698.     

Peanut varieties with reduced Ara h 1 content indicating no reduced allergenicity

Peanut allergy is a major cause of food‐induced severe anaphylactic reactions. To date, no medical care is available to prevent and treat peanut allergy and therefore hypoallergenic peanut varieties are of considerable health political and economic interest. Major allergens that induce IgE‐responses in peanut‐sensitive patients are Ara h 1, Ara h 2 and Ara h 3/4. In order to identify hypoallergenic peanuts, commercially locally available peanut varieties were screened for their allergen content. Ara h 1‐deficient peanuts from Southeast Asia were identified by SDS‐PAGE, immunoblotting, inhibition assays and ELISA. 2‐D PAGE analyses demonstrated the different compositions of the tested extracts and revealed a number of variations of the allergen patterns of peanuts from different varieties. Mediator release experiments of these peanut extracts demonstrated similar allergenicities as compared with standard peanut extract. These results indicate that the allergenicity of peanuts with reduced Ara h 1 content might be compensated by the other allergens, and thus do not necessarily cause a reduction of allergenicity.     

Synthese von nitro- und aminosubstituierten Thiobenzamiden durch Thiolierungsreaktionen mit elementarem Schwefel unter milden Bedingungen

Synthesis of Nitro- and Amino-Substituted Thiobenzamides by Thiolation Reactions with Elemental Sulfur at Mild Conditions The Synthesis of thiobenzamides 2 – 7 by basecatalyzed thiolation of nitro-benzyl-halides (type 1 ), especially at low temperatures, and the selective synthesis of p- and m-nitro-thio-benzamides ( 2 , 3 ) or p-and m-amino-thiobenzamides ( 5 , 6 ), respectively, are described. o-Nitro-benzylhalides (→ 4 , 7 ) are less reactive than p- and m-nitro-benzylhalides. The reaction of nitrobenzylhalides (type 1 ) with elemental sulfur and amines occuring at low temperatures to give 2 – 4 leads via structures of the type 11 , 15 and 16 .