Formation Mechanism of Hydrous-Zirconia Particles Produced by Hydrolysis of ZrOCl2 Solutions: II

The primary and secondary particle sizes of monoclinic hydrous-ZrO₂ particles produced by the hydrolysis of various ZrOCl₂ solutions, with and without the addition of NaCl, CaCl₂, or AlCl₃, were measured using X-ray diffraction and transmission electron microscopy in order to clarify the formation mechanisms of primary and secondary particles. The primary particle size of hydrous ZrO₂, under a constant ZrOCl₂ concentration, decreased monotonously with increasing Cl⁻-ion concentration. On the contrary, the secondary particle size increased monotonously with increasing Cl⁻-ion concentration. The present experimental results revealed that the primary and secondary particle sizes of hydrous ZrO₂ are controlled primarily by the concentrations of H⁺ and Cl⁻ ions produced during hydrolysis, and are independent of the type of added metal ions. The formation mechanisms of the primary and secondary particles of hydrous ZrO₂ were determined on the basis of the present experimental results.     

Steam reforming on Ni-samaria-doped ceria cermet anode for practical size solid oxide fuel cell at intermediate temperatures

Direct internal and external reforming operations on Ni-samaria-doped ceria (SDC) anode with the practical size solid oxide fuel cell (SOFC) at intermediate temperatures from 600 to 750 °C are carried out to reveal the reforming activities and the electrochemical activities, being compared with the hydrogen-fueled power generation. The cell performance with direct internal and external steam reforming of methane and their limiting current densities were almost the same irrespective of the progress of reaction in the methane reformate at 700 and 750 °C. The durability test for 5.5 h at 750 °C with direct internal reforming operation confirmed that the cell performance did not deteriorate. The operation temperature of the cell controlled the reforming activities on the anode, and the large size electrode gave rise to high conversion due to the slow space velocity of the steam reforming. Direct internal steam reforming attained sufficient level of conversion for SOFC power generation with methane at 700 and 750 °C on the large Ni-SDC cermet anode.     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Infrared study of catalytic reduction of lean NOx with alcohols over alumina-supported silver catalyst

Two intense IR absorption bands due to surface isocyanate (-NCO) species have been observed at 2262 and 2232 cm^–1 when an alumina-supported silver catalyst is exposed to a mixture of NO, O₂ and ethanol at 150°C and subsequently heated to > 300°C in vacuum. The intensity of the isocyanate band is hardly affected by the water existing in the mixture. Methanol is less reactive than ethanol for the formation of isocyanate species. The reaction mechanism of catalytic reduction of lean NOx with alcohols is discussed based on these IR spectroscopic findings.     

Critical issues for the manufacture of the ITER TF coil winding pack

Research and trials by the Japan Atomic Energy Agency (JAEA) focus on the remaining technical issues in the ITER TF coil winding pack (WP) manufacturing process. Specific issues include the feasibility of automatically measuring conductor length during automatic winding with a high degree of accuracy (±0.02%) and a fabrication process to comply with the demanding tolerances (up to 1 mm distortion in flatness and 1.5 mm in-plane shrinkage) of the radial plate (RP) due to cover plate (CP) welding. The authors developed a new technique to measure conductor length very accurately by combining an ordinary encoder and a newly developed optical system. A simulation based on test results of CP welding using a RP mock-up indicates that a flatness of 1 mm is achievable, but the in-plane shrinkage of the RP is approximately 5 mm. One possible solution is to fabricate the RP larger than required to allow for in-plane shrinkage. Another solution is to reduce the thickness or length of the welding. The feasibility of these solutions to most of the major technical issues suggests that it is time for full qualification testing of the fabrication process in a dummy double-pancake trial.     

Theoretical high-efficiency extraction study of a short-pulseelectron-beam-pumped ArF laser amplifier with atmospheric pressureAr-rich mixtures

The single-pass (50 cm) amplifier performance of an atmospheric-pressure ArF laser pumped by a 65-ns full-width-at-half-maximum short-pulse electron beam was investigated theoretically for a wide range of excitation rates (0.1-2.0 MW/cm³ ). Atmospheric mixtures of Ne, Ar, and F₂ (three mixtures of Ar=40%, 70%, and Ne-free) were studied. A kinetic numerical model of the ArF amplifier with a Ne buffer system was constructed. A one-dimensional propagation treatment considered the gain depletion and saturation absorption spatially and temporally along the optical axis. In this model the rate constants for electron quenching of ArF* of 1.6×10^-7, 1.9×10^-7, and 2.4×10 ^-7 cm³/s were used for Ar concentration of 40, 70 percent, and Ar/F₂ mixture, respectively     

Molecular Design and Synthesis of a Novel Substrate for Assaying Lysozyme Activity

A novel substrate {Galβ1,4GlcNAcβ1,4GlcNAc-β-pNP [Gal(GlcNAc)₂-β-pNP]} for assaying lysozyme activity has been designed using docking simulations and enzymatic synthesis via β-1,4-galactosyltransferase-mediated transglycosylation from UDP-Gal as the donor to (GlcNAc)₂-β-pNP as the acceptor. Hydrolysis of the synthesized Gal(GlcNAc)₂-β-pNP and related compounds using hen egg-white lysozyme (HEWL) demonstrated that the substrate was specifically cleaved to Gal(GlcNAc)₂ and p-nitrophenol (pNP). A combination of kinetic studies and docking simulation was further conducted to elucidate the mode of substrate binding. The results demonstrate that Gal(GlcNAc)₂-β-pNP selectively binds to a subsite of lysozyme to liberate the Gal(GlcNAc)₂ and pNP products. The work therefore describes a new colorimetric method for quantifying lysozyme on the basis of the determination of pNP liberated from the substrate.     

Antihypertensive Effect of Salt-Free Soy Sauce,a New Fermented Seasoning,in Spontaneously Hypertensive Rats

ABSTRACT: In this study, we focused on the antihypertensive effect of newly fermented salt-free soy sauce (SFS) in spontaneously hypertensive rats (SHRs). A 13-wk oral administration of SFS was performed daily in 8- to 21-wk-old SHRs with a dose of 200 mg/kg of body weight/d. The systolic (SBP) and diastolic (DBP) blood pressures were measured for each week during the experimental period. As a result, a significant (P < 0.01) BP lowering effect was observed from the 5th d to the end of the experiment in the SFS group compared with the control group (ΔSBP_21-wk: 27 mmHg, ΔDBP_21-wk: 20 mmHg). In contrast to such substantial effect by SFS intake, angiotensin I-converting enzyme activities in blood and local organs as well as pharmaceutical parameters such as serum Na⁺ or K⁺ level did not show any significant difference between in both SFS and control groups. Vasoconstriction experiment using thoracic aorta rings from 21-wk SHRs provided an interesting result that the rings from the SFS group evoked a >2-fold higher increase in the angiotensin II-stimulated constrictive response compared with the rings from the control group (P = 0.012), which suggested that the SFS-intake would be effective in possessing a higher vessel tone. Practical Application: In this study, we investigated the antihypertensive effect of newly fermented SFS in SHRs. As a result of 13-wk SFS-administration, we found a significant antihypertensive effect of the SFS. This finding strongly demonstrates that the developed SFS would be greatly beneficial for health and useful for health-related industries.     

Precise disturbance modeling for improvement of positioning performance

This paper presents a modeling methodology for unknown disturbances in mechatronics systems, based on disturbance estimation using an iterative learning process. In disturbance modeling, nonlinear frictions are specially handled as disturbances in the mechanisms, which mainly degrade trajectory control performance. Friction can be mathematically modeled by using learned estimation data as a function of the displacement, velocity. acceleration, and jerk of the actuator. This model has the distinctive feature that friction compensation can be achieved with a generalization capability for different conditions. The proposed positioning control approach with disturbance modeling and compensation has been verified by experiments using a table drive system on a machine stand. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 31–39, 2010; Published online in Wiley InterScience ( www. interscience.wiley.com ). DOI 10.1002/eej.20928     

High‐current lightning discharges in winter

Lightning electric‐field waveforms related to power line faults in winter have been identified. Most of those waveforms appear to be associated with upward lightning discharges with absolute peak currents of over 100 kA. They are quite different from common return‐stroke waveforms, and the lightning discharges which produce these characteristic waveforms are called GC (Ground to Cloud) flashes. These high‐current lightning discharges are distributed around the coastline in different ways depending on their polarities. The spatial distributions of high‐current lightning discharges around Japan are also investigated. It is revealed that the region of Honshu Island along the coastline of the Sea of Japan belongs to the area in which the density of high‐current lightning flashes is the highest in Japan through the year. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 8–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20874