Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Different support effect of M/ZrO2 and M/CeO2 (M = Pd and Pt) catalysts on CO adsorption: A periodic density functional study

CO adsorption over Pd₄ and Pt₄ cluster supported by c-ZrO₂(1 1 1) and CeO₂(1 1 1) catalyst systems was investigated using periodic density functional method in order to clarify the support effect on CO activation. We found that the support increases the CO activation for bridge and three-fold sites but decreases for the atop site. Moreover, it was found that the support changes the site preference for the CO adsorption. Bridge site on both the Pt₄/c-ZrO₂ and Pt₄/CeO₂ show larger CO adsorption energies than those on the other sites while the atop site is energetically preferable on isolated Pt₄ cluster. c-ZrO₂ supported Pd shows the largest CO activation with large charge transfer from the catalyst to the CO molecule. This reveals that ZrO₂ supported Pd can be a good catalyst for CO activation because of its higher probability to the three-fold site CO adsorption. We also found that positively charged M₄ clusters on the support keep their strong electron-donating properties and have enough charge density to contribute to the activation of an adsorbed CO molecule by a charge transfer.     

Influence of ammonium salt on electrowinning of copper from ammoniacal alkaline solutions

In order to develop an energy-saving copper recycling process from wastes, electrochemical measurements were conducted in ammoniacal alkaline solutions containing Cu(I) ions and an ammonium salt of sulfate, chloride or nitrate. The results of each system were then compared. The polarization measurements suggested that the voltage required for the electrode process is lower in the chloride and nitrate systems than that in the sulfate system. The cathode current efficiency during the copper electrodeposition varied from 39 to 97% and increased with current density in the chloride and sulfate systems. In the nitrate system, the lowest cathode current efficiency of 30% was observed because of nitrate ion reduction. Based on these results, the power consumption required for the electrowinning stage of the copper recycling process was calculated. Among these three systems, the chloride system showed the lowest power consumption of 500 kWh t⁻¹ at the current density of 200 A m⁻², which is about 25% of the conventional copper electrowinning process from a copper sulfate-sulfuric acid solution.     

CD63, a member of tetraspan transmembrane protein family, induces cellular spreading by reaction with monoclonal antibody on substrata

We cloned mouse LOX-1 cDNA to take advantage of a gene-targeting technique to clarify the role of LOX-1 in vivo. Mouse LOX-1 was composed of 363 amino acids and had a C-type lectin domain type II membrane protein structure. Mouse LOX-1 had triple repeats of the sequence in the extracellular "Neck domain," which is unlike human and bovine LOX-1. LOX-1 bound oxidized LDL with two classes of binding affinity in the presence of serum. The binding component with the higher affinity showed the lowest value of Kd among the known receptors for oxidized LDL. In the absence of serum, the high affinity component disappeared, suggesting that an unknown co-factor in serum is essential for efficient uptake of oxidized LDL by endothelial cells. A low concentration of unlabeled oxidized LDL displaced 125I-labeled oxidized LDL more efficiently in the presence of serum than in the absence of serum. The co-factor in the serum may be involved in the pathophysiology of atherosclerosis in addition to the oxidation of LDL.     

An Interactive Design System of Free‐Formed Bamboo‐Copters

We present an interactive design system for designing free‐formed bamboo‐copters, where novices can easily design free‐formed, even asymmetric bamboo‐copters that successfully fly. The designed bamboo‐copters can be fabricated using digital fabrication equipment, such as a laser cutter. Our system provides two useful functions for facilitating this design activity. First, it visualizes a simulated flight trajectory of the current bamboo‐copter design, which is updated in real time during the user's editing. Second, it provides an optimization function that automatically tweaks the current bamboo‐copter design such that the spin quality—how stably it spins—and the flight quality—how high and long it flies—are enhanced. To enable these functions, we present non‐trivial extensions over existing techniques for designing free‐formed model airplanes [ UKSI14 ], including a wing discretization method tailored to free‐formed bamboo‐copters and an optimization scheme for achieving stable bamboo‐copters considering both spin and flight qualities.     

A web-based e-learning system for increasing study efficiency by stimulating learner’s motivation

Due to the opportunities provided by the Internet, more and more people are taking advantage of distance learning courses and during the last few years enormous research efforts have been dedicated to the development of distance learning systems. So far, many e-learning systems are proposed and used practically. However, in these systems the e-learning completion rate is about 30%. One of the reasons is the low study desire when the learner studies the learning materials. In this research, we propose an interactive Web-based e-learning system. The purpose of our system is to increase the e-learning completion rate by stimulating learner’s motivation. The proposed system has three subsystems: the learning subsystem, learner support subsystem, and teacher support subsystem. The learning subsystem improves the learner’s study desire. The learner support subsystem supports the learner during the study, and the teacher support subsystem supports the teacher to get the learner’s study state. To evaluate the proposed system, we developed several experiments and surveys. By using new features such as: display of learner’s study history, change of interface color, encourage function, ranking function, self-determination of the study materials, and grouping of learners, the proposed system can increase the learning efficiency.

Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.     

Relationship between electrode surface roughness and impulse breakdown voltage in vacuum gap of Cu and Cu-Cr electrodes

The relationship between the impulse breakdown voltage of vacuum gaps and electrode surface roughness was investigated for the purpose of controlling the surface roughness on HV conductors. The roughness of mechanically polished Cu and Cu-Cr electrodes was measured with a roughness meter, and the relationship between the breakdown voltage and surface roughness was obtained for plate-to-plate gaps. The discharge-conditioning effect increased with reduction in the surface roughness. The breakdown voltage depended not only on the roughness of the cathode but also on the anode surfaces. Reducing the surface roughness was found not to be an effective way to increase the breakdown voltage for non-uniform field gaps after discharge conditioning.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Observation of the intrinsic pinning of a magnetic domain wall in a ferromagnetic nanowire

The spin transfer torque is essential for electrical magnetization switching. When a magnetic domain wall is driven by an electric current through an adiabatic spin torque, the theory predicts a threshold current even for a perfect wire without any extrinsic pinning. The experimental confirmation of this 'intrinsic pinning', however, has long been missing. Here, we give evidence that this intrinsic pinning determines the threshold, and thus that the adiabatic spin torque dominates the domain wall motion in a perpendicularly magnetized Co/Ni nanowire. The intrinsic nature manifests itself both in the field-independent threshold current and in the presence of its minimum on tuning the wire width. The demonstrated domain wall motion purely due to the adiabatic spin torque will serve to achieve robust operation and low energy consumption in spintronic devices.