Anode‐voltage‐control circuit for compensation of luminance deterioration

Abstract— An external driving circuit that has realized long lifetime, power‐consumption control, and peak luminance for organic light‐emitting diode (OLED) displays have been developed. This circuit realizes an effective method for constant‐anode‐voltage (CV) driving refered to as clamped inverter (CI) driving. The feature of CV driving is to achieve low‐power consumption compared with constant‐anode‐current (CC) driving and to control the power consumption and peak luminance according to the image because display luminance can be easily changed by controlling the anode voltage. On the other hand, CV driving has the problem that luminance deterioration appears to be serious compared with that of CC driving because the current of the OLED element decreases according to usage time. To cope with this, a lifetime compensation circuit that has increased the anode voltage so that it compensates for the luminance deterioration has been developed. This circuit can compensate not only the decrease in current but also the decrease in luminance at a constant current that CC driving cannot. However, increasing the anode voltage causes an increase in stress on the OLED element. The influence of stress on OLED lifetime was verified. As a result, it was confirmed that this circuit can extend the lifetime by 32% even if the anode voltage is increased, causing stress on the OLED structure.     

Spinal-Formed Context-Free Tree Grammars

In this paper we introduce a restricted model of context-free tree grammars called spine grammars, and study their formal properties including considerably simple normal forms. Recent research on natural languages has suggested that formalisms for natural languages need to generate a slightly larger class of languages than context-free grammars, and for that reason tree adjoining grammars have been widely studied relating them to natural languages. It is shown that the class of string languages generated by spine grammars coincides with that of tree adjoining grammars. We also introduce acceptors called linear pushdown tree automata, and show that linear pushdown tree automata accept exactly the class of tree languages generated by spine grammars. Linear pushdown tree automata are obtained from pushdown tree automata with a restriction on duplicability for the pushdown stacks. Received May 29, 1998, and in revised form April 27, 1999, and in final form May 10, 1999.     

Gradually intractable problems and nondeterministic log-space lower bounds

The paper places five different problems (thek-pebble game problem, two problems aboutk finite automata, the reachability problem for Petri nets withk tokens, and the teachability problem for graphs whose k-dimensional edge sets are described by Cartesian products ofk factors) into the hierarchyNL _k of problems solvable by nondeterministic Turing machines ink-log₂ n space (and binary tape alphabet, to avoid tape speed-up). The results, when combined with the conjecture thatNL _i contains problems that requireO(n ^k ) deterministic time, show that these problems, while inP for every fixed value ofk, have polynomial deterministic time complexities with the degree of the polynomial growing linearly with the parameterk, and hence are, in this sense, gradually intractable.     

A chemically amplified molecular glass resist with an ionic photoacid generator and a single protection group

A molecular glass resist with an ionic photoacid generator and a single protection group (MR‐1) has been developed. MR‐1 exhibited good thermal properties, such as a 5% weight loss temperature (T_d5%) of 167°C and a glass transition temperature (T_g) of 80°C. MR‐1 showed the good sensitivity of 80 μC/cm² and high contrast of 4.9 with e‐beam exposure (50 keV). A relatively high resolution of 50 nm and low Line‐Edge‐Roughness of 3.8 nm were obtained by e‐beam exposure (100 keV). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39769.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Combustion Characteristics of High Burn Rate Azide Polymer Propellant

The combustion characteristics of high burn rate azide polymer composite propellant were examined by using a chimney type strand burner, a Ø 80 mm × 140 mm small rocket motor and a L/D = 16 of Ø 70 mm heavy-wall rocket motor. The propellant, BAMO/NMMO copolymer was used as a fuel binder and AP as an oxidizer, burned approximately 29 mm/s at a pressure range of 7 MPa to 20 MPa with a plateau-mesa burning behavior. However, the pressure exponent rapidly increased at above the pressure of 20 MPa and was 0.52 between 20 MPa and 25 MPa. The low pressure exponent and high burn rate of the azide polymer propellant are suitable to the short burn time at the maximum expected operating pressure range of 15 MPa to 20 MPa. The high L/D heavywall rocket motor with volumeric mass fraction of 83% showed stable combustion without any pressure oscillation and severe erosive burning. The average burn rate in the high L/D motor was 10% larger than that estimated from the strand data. The theoretically calculated pressure-vs-time and thrust-vs-time curves were well consistent with the measured data. α = 20 and β = 180 for the Lenoir-Robillard equation were used to estimate the burn rate.     

关于日本智能社区(Smart Community)发展动向的介绍

本文摘录介绍了近年来日本在节能环保领域内,从国家的政策引导到地方政府和民间企业的积极参与建设新型智能社区的情况.并具体说明了一些关键应用,如新能源利用,能源管理系统,智能电网,EV电动车和新型交通系统在智能社区里的应用实例及日本在此领域内的标准化推进方面的情况.     

Molecular-beam epitaxial growth of HgCdTe infrared focal-plane arrays on silicon substrates for midwave infrared applications

Molecular beam epitaxy has been employed to deposit HgCdTe infrared detector structures on Si(112) substrates with performance at 125K that is equivalent to detectors grown on conventional CdZnTe substrates. The detector structures are grown on Si via CdTe(112)B buffer layers, whose structural properties include x-ray rocking curve full width at half maximum of 63 arc-sec and near-surface etch pit density of 3–5 × 10⁵ cm⁻² for 9 μm thick CdTe films. HgCdTe p⁺-on-n device structures were grown by molecular beam epitaxy (MBE) on both bulk CdZnTe and Si with 125K cutoff wavelengths ranging from 3.5 to 5 μm. External quantum efficiencies of 70%, limited only by reflection loss at the uncoated Si-vacuum interface, were achieved for detectors on Si. The current-voltage (I-V) characteristics of MBE-grown detectors on CdZnTe and Si were found to be equivalent, with reverse breakdown voltages well in excess of 700 mV. The temperature dependences of the I-V characteristics of MBE-grown diodes on CdZnTe and Si were found to be essentially identical and in agreement with a diffusion-limited current model for temperatures down to 110K. The performance of MBE-grown diodes on Si is also equivalent to that of typical liquid phase epitaxy-grown devices on CdZnTe with R₀A products in the 10⁶–10⁷ Θ-cm² range for 3.6 μm cutoff at 125K and R₀A products in the 10⁴–10⁵ Θ-cm² range for 4.7 μm cutoff at 125K.     

Detection of aluminium by energy dispersive X-ray microanalysis at high accelerating voltages with semi-thin sections of biological sample

Aluminium (Al) was detected in semi-thin sections of three organs, the duodenum, liver and kidney, of ddY strain mouse by energy dispersive X-ray microanalysis at high accelerating voltages around 300 kV. Firstly, to determine the conditions best for detecting Al, several adult ddY mice were injected intraperitoneally with aluminium chloride (AlCl3) and the duodenums were fixed, embedded and sectioned at various thicknesses and subjected to energy dispersive X-ray microanalysis at various accelerating voltages from 100 to 400 kV. From the results obtained, 1.0 microm-thick sections observed at 300 kV resulted in the highest peak-counts/background ratios and were shown to be the most suitable for X-ray microanalysis. Secondly, ddY mice aged four weeks were administered orally with 2% AlCl3 at pH 2.5 for two weeks and the three organs (duodenum, liver and kidney) were subjected to X-ray microanalysis under the same condition found above. The results were compared with light microscopic Al staining of the same tissues. Aluminium was detected in lysosomes of the three kinds of tissues with higher sensitivity by energy dispersive X-ray microanalysis by light microscopic observation. From the results, it was suggested that Al dissolved in acidic water was absorbed in the duodenum and accumulated in the liver and kidney.     

Application of nonlinear fitting and selection of the most fitted equation by AIC in stability test of pharmaceutical ingredients

We proposed a method for objectively selecting the most fitted rate equation among candidate rate equations based on chemical kinetics by both nonlinear regression analysis and Akaike's information criterion (AIC), to express the decrease of pharmaceutical ingredient as an appropriate equation. Pseudo-zero, first, and second-order rate equations were prepared as candidates beforehand, and AIC was introduced for selecting the most fitted rate equation among the candidates. We compared the proposed method to the Weibull method that expressed any decrease patterns as a single equation.

We quantified the contents of thiamine nitrate (VB1) and taurine after storage for one, three, and six months under 40°C-75% relative humidity by high-pressure liquid chromatography. Decrease patterns of each sample were most fitted to one of the candidate rate equations, that is, pseudo-zero, first, and second-order rate equations, respectively, and the degree of fit in the most fitted equation was superior to that of the Weibull method, except for the pseudo-first-order rate equation.

Moreover, we confirmed that the proposed method was considerably precise for estimating the stability of pharmaceuticals by comparing estimated residual rates and confidence intervals to experimental data.