Plastic resin pellets as a transport medium for toxic chemicals in the marine environment

Plastic resin pellets (small granules 0.1-0.5 centimeters in diameter) are widely distributed in the ocean all over the world. They are an industrial raw material for the plastic industry and are unintentionally released to the environment both during manufacturing and transport. They are sometimes ingested by seabirds and other marine organisms, and their adverse effects on organisms are a concern. In the present study, PCBs, DDE, and nonylphenols (NP) were detected in polypropylene (PP) resin pellets collected from four Japanese coasts. Concentrations of PCBs (4-117 ng/g), DDE (0.16-3.1 ng/g), and NP (0.13-16 microg/g) varied among the sampling sites. These concentrations were comparable to those for suspended particles and bottom sediments collected from the same area as the pellets. Field adsorption experiments using PP virgin pellets demonstrated significant and steady increase in PCBs and DDE concentrations throughout the six-day experiment, indicating that the source of PCBs and DDE is ambient seawater and that adsorption to pellet surfaces is the mechanism of enrichment. The major source of NP in the marine PP resin pellets was thought to be plastic additives and/or their degradation products. Comparison of PCBs and DDE concentrations in mari     

Internal oxidation of Fe-Al alloys in the α-phase region

The internal oxidation behavior of Fe-0.069, 0.158, and 0.274 wt% Al alloys was investigated in the -phase region. The internal oxidation experiments have been made over the temperature range from 1023 to 1123 K using a mixture of iron and its oxide powders. A parabolic rate law holds in the present alloys, where the rate constant, K_p, depends upon the oxidation temperature as well as the aluminum content. The internal oxidation of Fe-Al alloys is, therefore, controlled by a diffusion process of oxygen in the alloy. The oxide formed in the oxidation layer is the stoichiometric FeAl₂O₄ (hercynite). The aluminum concentration, N _Al ^Io , in the oxidation layer was calculated by taking account of counterdiffusion of aluminum. Furthermore, the oxygen concentration, N _O ^S , at the specimen surface was evaluated on the basis of thermodynamics. Using these estimated values of K_p, N _Al ^IO , and N _O ^S , the diffusion coefficient of oxygen, D _O ^IO , in the oxidation layer, where the oxide particles were dispersed, was also calculated. D _O ^IO increases as the volume fraction of the oxide, f^IO, increases. The diffusion coefficient of oxygen, D_O, in -iron was determined by extrapolating D _O ^IO to f^IO=0.     

LES analysis of flow and turbulent mixing in an unsteady jet

The flow and mixing process of unsteady jets are fundamentally analyzed by large eddy simulations. The effects of nozzle velocity and turbulence intensity on the turbulent eddy structure and mixing process between the nozzle fluid and ambient fluid were investigated. The results show that a toroidal‐shaped vortex, which emerges around the jet tip, primarily accelerates the entraining flow. Also, increasing the turbulence intensity in the nozzle encourages mixing in the jet without changing the jet‐contour. Furthermore, when the rise‐up time of the initial nozzle velocity is elongated, turbulent mixing is suppressed. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(5): 303–313, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20158     

An economic and energy analysis on bio-hydrogen fuel using a gasification process

Recently, in Japan, recycling technologies have been developed using waste biomass material. Waste biomass is traded in the waste materials market between users and a third-party, who receives a fee for processing them. This study is an environmental and economic analysis of a biomass energy system, which can produce hydrogen fuel for fuel cells (purity of 99.99%) as an example of an environmental business model. The experimental apparatus was made based on the moving-bed gasifier by the German company, DM2 Inc., and the hydrogen gas yield was measured. Finally, the economic viability of the future hydrogen business was estimated.The experimental results obtained gave the gas concentration of 57.5% in a Steam/Carbon ratio of 1.40 at 900 °C.Assuming the plant scale of 10 t/d, the production amount of hydrogen gas would be 21.3 kg/h. Based on the law concerning waste processing in Japan, a sizeable amount of waste biomass could be expected. Therefore, if the processing fee which is paid to the group (contractor) ranges between 5.0 and 10.0 $/t, and if the whole investment cost is 6 million dollars and the depreciation period is 15 years, the bio-hydrogen production cost using the experimental data would be 5.75–7.86 $/kg-H₂ without receiving related subsidies. In a one-third grant proportion, the cost would become 4.60–6.72 $/kg-H₂.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

Laser diode optical frequency stabilisation technique on ITU-T frequency grid employing modulated sideband light

A novel optical frequency stabilisation technique on the ITU-T frequency grid employing modulated sideband light is proposed. The L-band laser diode second sideband light generated by phase-modulation is locked to a carbon monoxide ¹²C¹⁶O gas absorption line; the original carrier is placed on the ITU-T frequency grid. The square root of Allan variance of 10^-8 has been achieved for a period of 12 h.     

Effects of coal rank and reaction conditions upon coprocessing coal with waste tyre

It is well known that the amount of waste tyre increases every year, and a numerous amount of waste tyre is landfilled or dumped all over the world, which causes environmental problems, such as destruction of natural places and the risk of fires. Coprocessing waste tyre and coal is considered as one of the effective processing methods of both materials. Upon coprocessing lower rank coal (Wyoming, C; 68%) with waste tyre, the synergistic effects to upgrading, such as the increase of oil yield and the decrease of residue yield, were appeared. However, the synergistic effects were not observed on coprocessing two kinds of higher rank coals with waste tyre. The reactions of coal with benzophenone were carried out to discuss the hydrogen donatability of coal. Conversion of benzophenone to diphenylmethane on the reaction with Wyoming coal was higher than those of higher rank coals. Accordingly, it was considered that the synergistic effects to upgrading upon coprocessing Wyoming coal with waste tyre were obtained owing to the enhancement of stabilization of radicals from tyre and Wyoming coal through the hydrogen donation from both tyre and Wyoming coal. The effects of reaction temperature and the amount of solvent upon coprocessing Wyoming coal with waste tyre were also discussed in this study.     

Synthesis of Mullite Whiskers and Their Application in Composites

Mullite whiskers were synthesized by a vapor-solid reaction. Mullite composition xerogels were fired at 900° to 1600°C with AlF₃ in an airtight container. An average whisker increased in length from 7 μm at 1100°C to 10 μm at 1600°C, whereas an average whisker decreased in aspect ratio from 25 to 10 with increased firing temperature. The whiskers elongated to the c -axis and the side planes were the {110}. A clear lattice image corresponding to (110) lattice spacing up to the edges of the whiskers was observed with high-resolution electron microscopy, and no droplet was observed on the tips of the whiskers. The chemical composition of the whiskers synthesized below 1100°C showed an apparent Al₂O₃-rich composition of about 72 mol%. Composites reinforced by 15 vol% of mullite whiskers in the matrix of 75 vol% mullite/25 vol% Y-TZP enhanced the fracture toughness compared with those materials without mullite whiskers.     

Computable urban economic model incorporated with economies of scale for urban agglomeration simulation

Urban agglomeration has attracted attentions of urban planners, economists, and policymakers. For the sake of urban agglomeration simulation, this paper attempts to develop a computable urban economic (CUE) model incorporated with economies of scale, through the approach of new economic geography. It is assumed that each firm produces a product variant in a monopolistic competition market, and the number of firms is explicit and determined endogenously. The Dixit–Stiglitz type utility function with product variety is adopted into the households’ behavior to reflect consumers’ preference for variety. On the other hand, internal increasing returns to scale and fixed cost are introduced in firms’ behavior to extend the model with economies of scale. The model’s parameter estimations and calibration are conducted on the basis of empirical data from several approved sources for Changzhou in 2008. Numerical computations are implemented by employing the extended CUE model incorporated with economies of scale to explain and examine how the urban agglomeration comes into being. Simulation results show that the extended model incorporated with economies of scale is able to commendably represent the urban agglomeration mechanism, providing a promising simulation tool for urban planning and policymaking.     

Force sensorless robust tracking servo system suppressing periodic disturbance and sudden disturbance for optical disk system

This paper proposes a new force sensorless robust tracking servo system, which detects and suppresses both the periodic disturbance and the sudden disturbance without force sensor. The proposed system estimates both the periodic disturbance and the sudden disturbance and the sudden disturbance by using a new sudden disturbance observer and the memory of tracking error. In the proposed system, the influence of sudden disturbance is suppressed by the proposed sudden disturbance observer. On the other hand, the influence of periodic disturbance is suppressed by means of ZPET feed‐forward servo system. The experimental results point out that the proposed tracking servo system has a precise tracking response against both the periodic disturbance and the sudden disturbance. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(1): 82–90, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20614