The Koala component model for consumer electronics software

Most consumer electronics today contain embedded software. In the early days, developing CE software presented relatively minor challenges, but in the past several years three significant problems have arisen: size and complexity of the software in individual products; the increasing diversity of products and their software; and the need for decreased development time. The question of handling diversity and complexity in embedded software at an increasing production speed becomes an urgent one. The authors present their belief that the answer lies not in hiring more software engineers. They are not readily available, and even if they were, experience shows that larger projects induce larger lead times and often result in greater complexity. Instead, they believe that the answer lies in the use and reuse of software components that work within an explicit software architecture. The Koala model, a component-oriented approach detailed in this article, is their way of handling the diversity of software in consumer electronics. Used for embedded software in TV sets, it allows late binding of reusable components with no additional overhead     

An Approach for Recovering Distributed System Architectures

Reasoning about software systems at the architectural level is key to effective software development, management, evolution and reuse. All too often, though, the lack of appropriate documentation leads to a situation where architectural design information has to be recovered directly from implemented software artifacts. This is a very demanding process, particularly when involving recovery of runtime abstractions (clients, servers, interaction protocols, etc.) that are typical to the design of distributed software systems. This paper presents an exploratory reverse engineering approach, called X-ray, to aid programmers in recovering architectural runtime information from a distributed system's existing software artifacts. X-ray comprises three domain-based static analysis techniques, namely component module classification, syntactic pattern matching, and structural reachability analysis. These complementary techniques can facilitate the task of identifying a distributed system's implemented executable components and their potential runtime interconnections. The component module classification technique automatically distinguishes source code modules according to the executables components they implement. The syntactic pattern matching technique in turn helps to recognise specific code fragments that may implement typical component interaction features. Finally, the structural reachability analysis technique aids in the association of those features to the code specific for each executable component. The paper describes and illustrates the main concepts underlying each technique, reports on their implementation as a suit of new and off-the-shelf tools, and, to give evidence of the utility of the approach, provides a detailed account of a successful application of the three techniques to help recover a static approximation of the runtime architecture for Field, a publicly-available distributed programming environment.     

Analysis of a mixed mode fracture specimen: the asymmetric double cantilever beam

An asymmetric double cantilever beam (ADCB) is a simple but effective specimen for the measurement of polymer/polymer and polymer/non-polymer bimaterial interface fracture toughness. In order to characterize fully the bimaterial interface strength, and to control the crack trajectory, the critical energy release rate, G _c, and the phase angle, , of the applied stress field as functions of loading and geometry of the specimen should be obtained. For most practical cases, has to be evaluated numerically. In this work, a boundary element analysis is carried out to obtain G and for the ADCB specimen at different material and geometry combinations. An expression for the energy release rate, G, based on Kanninen's beam on elastic foundation model is compared with the numerical results. Limitations on the use of the ADCB specimen are also discussed.     

Craze intersections in biaxially-stressed polystyrene

Crazes are produced on two orthogonal planes in both thin film and macroscopic samples of polystyrene by sequentially applying two orthogonal tensile strains ₁ and ₂. Although many crazes produced by the second strain ₂ (secondary crazes) are stopped when they meet a primary craze, some intersections occur. The fraction of craze meetings resulting in intersection increases from 20% at ₁= ₂=3% to 55% at ₁= ₂=5%; intersections also occur preferentially in thin regions of primary crazes. The craze fibril structure in the intersection has a much lower fibril volume fraction, v _f, than either of the two crazes from which it formed. The fibril volume fraction in the intersection is approximately given by the product of the fibril volume fractions of the two crazes, in agreement with a prediction based on the surface drawing mechanism of craze thickening. At higher strain levels the v _fs of the intersections are lower, leading to higher fibril stresses and enhanced fibril fracture; an increasing fraction of intersections breaks down to form large voids at these higher strain levels. Fractography of macroscopic samples containing intersecting crazes demonstrates that voids formed at the intersections can act as nuclei for cracks causing premature fracture of the material.     

Micromechanics of solvent crazes in polystyrene

Double exposure holographic interferometry (DEHI) is used to determine the strain energy release rate, craze opening displacement profile, and craze stress profile ofn-heptane and methanol crazes growing from cracks in polystyrene.n-heptane crazes have strain energy release rates (SERRs) close to those of cracks and their stress profile is almost crack-like in that the tensile stress across the craze falls almost to zero. On the other hand, the SERRs of methanol crazes are only 30 to 55% the SERR of a crack depending on stress intensity factorK _I of the precrack from which they are grown. The stress profile of the methanol craze shows it to be strongly load-bearing away from the craze tip, apparently as a result of the strain hardening of the craze fibrils. The stress concentration in front of the methanol craze tip is only 40% of that in front of then-heptane craze tip. The opening displacements of the methanol craze are almost as large as those of a crack very near its tip but are much less than those of a crack at large distances behind the tip. The Dugdale model of a strip yielding zone provides a poor representation of the craze opening displacements of the growing methanol craze. Dry (static) methanol crazes have larger opening displacements in response to an incremental tensile strain at moderate prestrains than at either low or high prestrains, suggesting that the craze fibrils undergo a yielding/strain-hardening process as the strain is increased similar to that observed in polycarbonate crazes by Kopp and Kambour. Dryn-heptane crazes do not show this response but rather open linearly with increasing prestrain. The opening displacement for long (dry)n-heptane crazes is almost crack-like whereas the largest opening of a dry methanol craze is only 20% of that of a crack. Dry methanol crazes break at aK _IC that is 40% of theK _IC of precracked but uncrazed specimens. The strongest (shortest) dryn-heptane crazes fail at only 7% ofK _IC of uncrazed specimens and theK _IC of the dryn-heptane crazes decreases markedly with increasing craze length.     

A theory of pad conditioning for chemical-mechanical polishing

Statistical models are presented to describe the evolution of the surface roughness of polishing pads during the pad-conditioning process in chemical-mechanical polishing. The models describe the evolution of the surface-height probability-density function of solid pads during fixed height or fixed cut-rate conditioning. An integral equation is derived for the effect of conditioning on a foamed pad in terms of a model for a solid pad. The models that combine wear and conditioning are then discussed for both solid and foamed pads. Models include the dependence of the surface roughness on the shape and density of the cutting tips used in the conditioner and on other operating parameters. Good agreement is found between the model, Monte Carlo simulations and with experimental data.     

Plane stress deformation zones at crack tips in polycarbonate

The plastic deformation produced crack tips in polycarbonate (PC) films stretched in tension, has been characterized by optical and transmission electron microscopy. An extensive and diffuse region of deformation is formed in unannealed specimens. Within this zone the ratio (v _f) of local film thickness to the (undeformed) thickness far away from the crack varies gradually both along and across the zone. The minimum ratio of 0.5 occurs at the crack tip. In contrast to this behaviour, films annealed for a short time just below the glass transition temperature T _g showed a highly localized response, the plastic strain being confined to a well-defined flame shaped deformation zone (DZ) ahead of the crack. Within most of this DZ, v _f is constant at 0.7, rising to 1 over a distance of 10 m at the zone tip, and falling to 0.5 over a distance of 4 m around the crack tip. Bi-refringence measurements show that a high degree of molecular orientation occurs within the zone. These experiments support the idea that an increase in the localization of the plastic strain response upon annealing below T _g is responsible for the embrittlement of PC by such heat treatment.     

Genetic Elements Orchestrating Lactobacillus crispatus Glycogen Metabolism in the Vagina

Glycogen in the female lower reproductive tract is a major carbon source for colonization and acidification by common vaginal Lactobacillus species, such as Lactobacillus crispatus. Previously, we identified the amylopullulanase encoding gene pulA of Lactobacillus crispatus to correlate with the ability to autonomously utilize glycogen for growth. Here, we further characterize genetic variation and differential regulation of pulA affecting the presence of its gene product on the outer surface layer. We show that alpha-glucan degrading activity dissipates when Lactobacillus crispatus is grown on glucose, maltose and maltotriose, in agreement with carbon catabolite repression elements flanking the pulA gene. Proteome analysis of the S-layer confirmed that the amylopullulanase protein is highly abundant in an S-layer enriched fraction, but not in a strain with a defective amylopullulanase variant or in an amylopullulanase-sufficient strain grown on glucose. In addition, we provide evidence that Lactobacillus crispatus pulA mutants are relevant in vivo, as they are commonly observed in metagenome datasets of human vaginal microbial communities. Analysis of the largest publicly available dataset of 1507 human vaginal metagenomes indicates that among the 270 samples that contain a Lactobacillus crispatus pulA gene, 62 samples (23%) had a defective variant of this gene. Taken together, these results demonstrate that both environmental, as well as genetic factors explain the variation of Lactobacillus crispatus alpha-glucosidases in the vaginal environment.