Ultranarrow Bandwidth Organic Photodiodes by Exchange Narrowing in Merocyanine H‐ and J‐Aggregate Excitonic Systems

Ultranarrowband organic photodiodes (OPDs) are demonstrated for thin film solid state materials composed of tightly packed dipolar merocyanine dyes. For these dyes the packing arrangement can be controlled by the bulkiness of the donor substituent, leading to either strong H‐ or strong J‐type exciton coupling in the interesting blue (H‐aggregate) and NIR (J‐aggregate) spectral ranges. Both bands are shown to arise from one single exciton band according to fluorescence measurements and are not just a mere consequence of different polymorphs within the same thin film. By fabrication of organic thin‐film transistors, these dyes are demonstrated to exhibit hole transport behavior in spin‐coated thin films. Moreover, when used as organic photodiodes in planar heterojunctions with C₆₀ fullerene, they show wavelength‐selective photocurrents in the solid state with maximum external quantum efficiencies of up to 11% and ultranarrow bandwidths down to 30 nm. Thereby, narrowing the linewidths of optoelectronic functional materials by exciton coupling provides a powerful approach to produce ultranarrowband organic photodiodes.     

On the Design of Cauer Filters

Simple formulas are given which relate the parameters of Cauer Filters.     

Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor

Wire‐shaped electrodes for solid‐state cable‐type supercapacitors (SSCTS) with high device capacitance and ultrahigh rate capability are prepared by depositing poly(3,4‐ethylenedioxythiophene) onto self‐doped TiO₂ nanotubes (D‐TiO₂) aligned on Ti wire via a well‐controlled electrochemical process. The large surface area, short ion diffusion path, and high electrical conductivity of these rationally engineered electrodes all contribute to the energy storage performance of SSCTS. The cyclic voltammetric studies show the good energy storage ability of the SSCTS even at an ultrahigh scan rate of 1000 V s^?1, which reveals the excellent instantaneous power characteristics of the device. The capacitance of 1.1 V SSCTS obtained from the charge–discharge measurements is 208.36 µF cm^?1 at a discharge current of 100 µA cm^?1 and 152.36 µF cm^?1 at a discharge current of 2000 µA cm^?1, respectively, indicating the ultrahigh rate capability. Furthermore, the SSCTS shows superior cyclic stability during long‐term (20 000 cycles) cycling, and also maintains excellent performance when it is subjected to bending and succeeding straightening process.     

Multifunctional Optical Terminals for Microsatellite Clusters – Design Tradeoffs

We study optical terminals with both communication and ranging capabilities for their potential use in short range free-space applications, typically encountered within a cluster of microsatellites. For our considerations we assume satellites with a unit mass between 10 kg and 100 kg, with mutual distances on the order of a few km, and per link data rates range from a few kbits/s to some 100 Mbit/s. We discuss possible network topologies and multiple access methods, andcompare the performance characteristics of different intensity modulation formats, taking into account not only the task of communication but also that of accurate intra-cluster distance measurement. Our considerations revealbasic tradeoffs to be observed when designing such multifunctional optical terminals.     

Polyphenylene Dendrimer‐Templated In Situ Construction of Inorganic–Organic Hybrid Rice‐Shaped Architectures

A novel dendrimer‐templating method for the synthesis of CuO nanoparticles and the in situ construction of ordered inorganic–organic CuO–G2Td(COOH)₁₆rice‐shaped architectures (RSAs) with analogous monocrystalline structures are reported. The primary CuO nanoparticles are linked by the G2Td(COOH)₁₆ dendrimer. This method provides a way to preserve the original properties of primary CuO nanoparticles in the ordered hybrid nanomaterials by using the 3D rigid polyphenylene dendrimer (G2Td(COOH)₁₆) as a space isolation. The primary CuO nanoparticles with diameter of (6.3 ± 0.4) nm are synthesized via four successive reaction steps starting from the rapid reduction of Cu(NO₃)₂ by using NaBH₄ as reducer and G2Td(COOH)₁₆ as surfactant. The obtained hybrid CuO–G2Td(COOH)₁₆ RSA, formed in the last reaction step, possesses a crystal structure analogous to a monocrystal as observed by transmission electron microscopy(TEM). In particular, the formation process of the RSA is monitored by UV–vis, TEM, and X‐ray diffraction. Small angle X‐ray scattering and Fourier transform infrared spectroscopy are used to investigate the role of the dendrimer in the RSA formation process. The obtained results illuminate that Cu²⁺? COO^? coordination bonds play an indispensable role in bridging and dispersing the primary CuO nanoparticles to induce and maintain the hybrid RSA. More importantly, the RSA is retained through the Cu²⁺? COO^?coordination bonds even with HCl treatment, suggesting that the dendrimers and Cu²⁺ ions may form rice‐shaped polymeric complexes which could template the assembly of CuO nanoparticles towards RSAs. This study highlights the feasibility and flexibility of employing the peculiar dendrimers to in‐situ build up hybrid architectures which could further serve as templates, containers or nanoreactors for the synthesis of other nanomaterials.     

An integrated 8-12 GHz fractional-N frequency synthesizer in SiGe BiCMOS for satellite communications

We present an integrated fractional-N low-noise frequency synthesizer for satellite applications. By using two integrated VCOs and combining digital and analog tuning techniques, a PLL lock range from 8 to 12 GHz is achieved. Due to a small VCO fine tuning gain and optimized charge pump output biasing, the phase noise is low and almost constant over the tuning range. All 16 sub-bands show a tuning range above 900 MHz each, allowing temperature compensation without sub-band switching. This makes the synthesizer robust against variations of the device parameters with process, supply voltage, temperature and aging. The measured phase noise is ?87 dBc/Hz and ?106 dBc/Hz at 10 kHz and 1 MHz offset, respectively. In integer-N mode, phase noise values down to ?98 dBc/Hz at 10 kHz and ?111 dBc/Hz at 1 MHz offset, respectively, were measured.     

Selectively Promoting or Preventing Osteoblast Growth on Titanium Functionalized with Polyelectrolyte Multilayers

Titanium plays an important role in medical applications, such as hip joint implants or fixation plates. These implants must perform differently depending on their clinical application. In particular, the osseointegrative properties required of the implant vary with clinical application. The present work is aimed at the functionalization of titanium surface using polyelectrolyte multilayers consisting of natural biopolymers and testing their cell adhesive properties with respect to the osseointegration capacity. Multilayered coatings were created from chitosan (Chi), hyaluronic acid (HA), and gelatine (Gel) through layer‐by‐layer deposition. Cell adhesion, proliferation, and viability were tested in vitro with the human osteoblast cell line CAL‐72 at timescales up to 7 d. Two multilayer coatings consisting of alternated chitosan/gelatin or chitosan/hyaluronic acid layers with the outmost layer of gelatin (Chi/Gel) or hyaluronic acid (Chi/HA), respectively, were tested. The experimental results showed that surfaces functionalized with Chi/Gel and Chi/HA multilayers demonstrated a good initial adhesion of osteoblasts. After 4 d culturing, osteoblast cells were almost completely detached from the substrates functionalized with Chi/HA multilayers. In contrast to Chi/HA, the proliferation of osteoblasts on substrates with Chi/Gel multilayer coatings was statistically significantly higher compared to the control titanium. We have shown that the growth of osteoblasts can be enhanced or completely prevented on a titanium surface functionalized with polyelectrolyte multilayers consisting of natural biopolymers, as desired. Both multilayer coatings, Chi/Gel and Chi/HA, have potential for applications in the field of titanium implants, where rapid osseointegration is essential, and/or where no ingrowth of the implant is desired, respectively.     

A Study on the Feasibility of Measuring the Emissivity with the Laser-Flash Method

The laser-flash method is a fast, widely used and well established technique to measure the thermal diffusivity. Since its introduction in the 1960s, it was proposed to expand this technique to the measurement of heat capacity and emissivity. Currently, the measurement of spectral emissivity at high temperatures is connected with relatively large uncertainties, although the spectral emissivity is an essential parameter for applications, e.g., in the lamp industry and fusion research. In this work, a theoretical study is presented on the possibility of emissivity measurements using the laser-flash method. Two mathematical approaches are discussed which solve the problem, that a measured temperature rise—necessary to calculate the emissivity—itself depends on the emissivity. It is shown that both methods have a negligible arithmetic error, making them applicable to be used in future work.     

Gamma irradiation of cowpea (Vigna unguiculata L. Walp) flours and pastes: Effects on functional,thermal and molecular properties of isolated proteins

In a previous study irradiation of cowpea flours and pastes at medium (10 kGy) and high (50 kGy) doses resulted in significant changes in protein-related functional properties. To understand some of the effects of gamma irradiation on cowpea proteins in particular, we isolated proteins from cowpea flours (FPC) and pastes (PPC) treated with gamma irradiation at 2, 10, and 50 kGy and analyzed their functional, thermal and molecular properties. Nitrogen solubility index of both FPC and PPC decreased, whereas oil absorption and emulsion capacities increased significantly with increasing irradiation dose. Differential scanning calorimetry showed decreases in transition temperatures (T_d) and enthalpies (ΔH), indicating a progressive denaturation of cowpea proteins with increasing irradiation. Size exclusion HPLC revealed increases in protein molecular weights, probably due to protein–protein cross-linking with irradiation in a dose-dependent manner. Reducing SDS-PAGE of FPC and PPC samples seems to suggest that the contribution of disulphide bonds to irradiation-induced cowpea protein–protein cross-linking is small.