基于时间分辨荧光各向异性成像的罗丹明B溶液粘度特性研究

基于时间分辨荧光各向异性成像技术,利用激光扫 描共聚焦显微镜耦合时间相关单光子计数系统,对不同浓度甘油及不同浓度蔗糖的罗丹明B 溶液粘度的荧光各向异性进行了测量。实验表明,随着溶液浓度增大,荧光偏振值和粘度都 相应增大,而荧光寿命与溶液微环境的粘度成反比。据此,基于荧光分子各向异性的产生原 理,给出了荧光团在转动过程中旋转弛豫时间与旋转相关时间的定量关系。它表明时间分 辨荧光各向异性检测可用于微环境粘度的检测和源自细胞内粘度变化导致的机体某些疾病或 机能失调的诊断。     

Synthesis of Microporous Carbon Nanofibers and Nanotubes from Conjugated Polymer Network and Evaluation in Electrochemical Capacitor

One‐dimensional fibers and tubes are constructed through the oriented carbon‐carbon cross‐linking reactions towards rigid conjugated polymer networks. As the result, a template‐free and one‐step synthesis of CNTs and CNFs is achieved through a simple carbonization of the as‐formed carbon‐rich tubular and fiberlike polyphenylene precursors under argon. Microporous CNTs and CNFs with a surface area up to 900 m² g^–1 are obtained, together with HR‐TEM characterizations indicating the formation of intrinsic microporous structure in these rigid carbon‐rich networks. The primary electrochemical experiments reveal their promising applications as advanced electrodes in electrochemical double‐layered capacitor (EDLC).     

Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor

Wire‐shaped electrodes for solid‐state cable‐type supercapacitors (SSCTS) with high device capacitance and ultrahigh rate capability are prepared by depositing poly(3,4‐ethylenedioxythiophene) onto self‐doped TiO₂ nanotubes (D‐TiO₂) aligned on Ti wire via a well‐controlled electrochemical process. The large surface area, short ion diffusion path, and high electrical conductivity of these rationally engineered electrodes all contribute to the energy storage performance of SSCTS. The cyclic voltammetric studies show the good energy storage ability of the SSCTS even at an ultrahigh scan rate of 1000 V s^?1, which reveals the excellent instantaneous power characteristics of the device. The capacitance of 1.1 V SSCTS obtained from the charge–discharge measurements is 208.36 µF cm^?1 at a discharge current of 100 µA cm^?1 and 152.36 µF cm^?1 at a discharge current of 2000 µA cm^?1, respectively, indicating the ultrahigh rate capability. Furthermore, the SSCTS shows superior cyclic stability during long‐term (20 000 cycles) cycling, and also maintains excellent performance when it is subjected to bending and succeeding straightening process.     

On the Design of Cauer Filters

Simple formulas are given which relate the parameters of Cauer Filters.     

Gravimetric determination of tannins and their correlations with chemical and protein precipitation methods

Abstract. A method for gravimetric determination of tannins based on binding with insoluble polyvinylpyrrolidone (PVP) is presented. The gravimetric method gives the absolute amount of tannins and avoids problems of standards associated with spectrophotometric methods. The method was applied to nine browse and tree leaves. The values obtained correlate significantly with tannins determined spectrophotometrically, protein precipitation capacities and protein precipitable phenotics. This method together with other tannin assays will be useful in nutritional studies. The present study also demonstrates the different behaviour of tannic acids from different commercial sources towards PVP suggesting the presence of different moieties in tannic acids from different commercial sources and even among batches from the same source thereby affecting the results obtained using the spectrophotometric methods. Use of well-defined tannic acid as a standard in spectrophotometric methods is suggested which will allow meaningful comparison of values obtained from different laboratories.     

Buchbesprechungen

Ohne Zusammenfassung     

A Future Millimeter/Sub–Millimeter Radiometer for Satellite Observation of Ice Clouds

The instrument concept of a future spaceborne millimeter/sub-millimeter radiometer is proposed in this paper for the remote sensing of ice clouds from satellite. The proposed radiometer is expected to operate at a series of frequencies within the millimeter and sub-millimeter wave range from 150 to about 900 GHz. Five frequencies are selected in the atmospheric windows, i.e., 150, 220, 463, 683, 874 GHz, and at each frequency there are two orthogonally polarized channels. Three water vapor channels located close to 183.31 GHz are also included in this instrument, since they can provide water vapor information, which is needed for ice cloud parameter retrieval. To simplify system design and test, a modular design philosophy is followed in the receiver frontend design and two antennas are used separately for the millimeter and sub-millimeter channels. Overall, the instrument requirements can be met with today's technology, except for the channels at the highest frequencies, where the radiometric sensitivity can be larger than the required 1.0 K for the 10 km spatial resolution (2.5 ms integration time). However, this situation can be improved by averaging neighboring pixels in data processing if certain compromise in the spatial resolution can be made at these frequencies.     

Fluoroscopy-based 3-D reconstruction of femoral bone cement: a new approach for revision total hip replacement

In revision total hip replacement the removal of the distal femoral bone cement can be a time consuming and risky operation due to the difficulty in determining the three-dimensional (3-D) boundary of the cement. We present a new approach to reconstruct the bone cement volume by using just a small number of calibrated multiplanar X-ray images. The modular system design allows the surgeon to react intraoperatively to problems arising during the individual situation. When encountering problems during conventional cement removal, the system can be used on demand to acquire a few calibrated X-ray images. After a semi-automatic segmentation and 3-D reconstruction of the cement with a deformable model, the system guides the surgeon through a free-hand navigated or robot-assisted cement removal. The experimental evaluation using plastic test implants cemented into anatomic specimen of human femoral bone has shown the potential of this method with a maximal error of 1.2 mm (0.5 mm RMS) for the distal cement based on just 4-5 multiplanar X-ray images. A first test of the complete system, comparing the 3-D-reconstruction with a computed tompgraphy data set, confirmed these results with a mean error about 1 mm.     

A 90-nm logic technology featuring strained-silicon

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.