Effects of chilling rate on outgrowth of Clostridium perfringens spores in vacuum-packaged cooked beef and pork

Cooked, chilled beef and cooked, chilled pork were inoculated with three strains of Clostridium perfringens (NCTC 8238 [Hobbs serotype 2], NCTC 8239 [Hobbs serotype 3], and NCTC 10240). Inoculated products were heated to 75 degrees C, held for 10 min in a circulating water bath to heat activate the spores, and then chilled by circulating chilled brine through the water bath. Samples were chilled from 54.4 to 26.6 degrees C in 2 h and from 26.6 to 4.4 degrees C in 5 h. Differences in initial C. perfringens log counts and log counts after chilling were determined and compared with the U.S. Department of Agriculture (USDA) stabilization guidelines requiring that the chilling process allow no more than 1 log total growth of C. perfringens in the finished product. This chilling method resulted in average C. perfringens increases of 0.52 and 0.68 log units in cooked beef and cooked pork, respectively. These log increases were well within the maximum 1-log increase permitted by the USDA, thus meeting the USDA compliance guidelines for the cooling of heat-treated meat and poultry products.     

Stimulation of starter culture for further reduction of foodborne pathogens during salami fermentation

This study was conducted to determine if stimulated meat starter culture (MSC; Pediococcus acidilactici) would further control Escherichia coli O157:H7, Listeria monocytogenes, and Staphylococcus aureus during salami fermentation. Manganese ion (0.005% of MnSO4) was used as a stimulator for the growth and acid production of MSC. After 24-h salami fermentation, nonstimulated MSC and stimulated MSC reduced E. coli O157:H7 levels by 1.3 and 2.3 log10 units, respectively. Nonstimulated MSC reduced L. monocytogenes levels by 1.2 log10 units, whereas the stimulated MSC achieved a 2.2-log10 reduction after 24-h fermentation. In the case of S. aureus, nonstimulated MSC and stimulated MSC reduced S. aureus levels by 1.3 and 2.3 log10 units after 24-h fermentation, respectively. Stimulated MSC by MnSO4 reduced those foodborne pathogens more effectively compared with nonstimulated MSC (P < 0.05).     

A new model system for lipid interactions in stratum corneum vesicles: effects of lipid composition, calcium, and pH

We prepared large unilamellar vesicles (LUVs) with three different stratum corneum lipid compositions: constant amounts of ceramides (55 wt %) and fatty acids (15%) with varying amounts of cholesterol sulfate (0-15%) and cholesterol (15-30%). One of the compositions served as a model for normal stratum corneum, while the second one served as a model for recessive X-linked ichthyosis stratum corneum. The third composition consisted of no cholesterol sulfate. Intervesicle lipid interactions in these LUVs were monitored by fluorescence methods for content leakage, and contents mixing at pH 9, in the absence and presence of Ca2+, and at pH 6. Since the content leakage and contents mixing assays were originally developed for phospholipid vesicles, we characterized the probe binding and the probe quenching properties for stratum corneum LUV systems, and modified the assays slightly accordingly. The time-dependent fluorescence intensity changes in the probe-containing LUVs at pH 9 and 6 and in response to the addition of calcium were monitored. Our results demonstrated that all three types of LUVs were relatively stable at pH 9. Addition of Ca2+ or decreasing the pH to 6 activated intervesicle lipid mixing followed by vesicle fusion and lysis. We found that the LUVs with no cholesterol sulfate and 30% cholesterol exhibited a more extensive Ca2+- or low-pH-activated intervesicle lipid interaction than LUVs with either 5% cholesterol sulfate and 25% cholesterol or 15% cholesterol sulfate and 15% cholesterol. These results suggest that fusogenic agents such as Ca2+ and H+ act to neutralize the fatty acids in the lipid bilayer of stratum corneum vesicles. The inclusion of 5-15% cholesterol sulfate helps to prevent the collapse of fused vesicles into other structures.     

Effects of Bi4Ti3O12 addition on the microstructure and dielectric properties of modified BaTiO3 under a reducing atmosphere

The effects of Bi₄Ti₃O₁₂ addition on the microstructure and dielectric properties of Mn-modified BaTiO₃ were investigated to develop low temperature fired BaTiO₃-based ceramics with stable temperature characteristics. The sintering temperature of Mn-doped BaTiO₃ could be reduced to 1200 °C by adding more than 1 mol% Bi₄Ti₃O₁₂. TEM results show an apparent core–shell structure with 2 mol% Bi₄Ti₃O₁₂ addition. However, it was destroyed when the Bi₄Ti₃O₁₂ content increased from 2 to 4 mol%. The permittivity decreased and the Curie temperature shifted to higher temperature when the Bi₄Ti₃O₁₂ content increased from 0 to 3 mol%. The temperature characteristic of capacitance was very close to the EIA X8R specification when 2 mol% Bi₄Ti₃O₁₂ was added due to the presence of the core–shell grain structure and raised Curie temperature. With adequate Bi₄Ti₃O₁₂ addition, the BaTiO₃-based system shows great potential for applications in EIA X8R-type multilayer ceramic capacitors.     

Interactions of the alpha-spectrin N-terminal region with beta-spectrin. Implications for the spectrin tetramerization reaction

Spectrin of the erythrocyte membrane skeleton is composed of alpha- and beta-spectrin, which associate to form heterodimers and tetramers. It has been suggested that a fractional domain (helix C) in the amino-terminal region of alpha-spectrin (Nalpha region) bundles with another fractional domain in the carboxyl-terminal region of beta-spectrin (Cbeta region) to yield a triple alpha-helical bundle and that this helical bundling is largely responsible for tetramer formation. However, there are certain objections to assigning a preeminent role to this helical bundling in the tetramerization reactions. We prepared several recombinant peptides of alpha-spectrin fragments spanning only the Nalpha region (lacking the dimer nucleation site) and quantitatively studied their interaction with beta-spectrin. We found that a majority of the interactions were localized, as expected, in the Nalpha-helix C region but that there was also some contribution from the nonhomologous region. More importantly, the temperature and ionic strength dependence of this interaction in our model peptides was different from that in intact spectrin. We suggest that, although the regions involving the putative helical bundling in alpha- and beta-spectrin undoubtedly play a significant role in tetramerization, regions distal to the Nalpha-helix C region in spectrin are also involved in tetramer formation. Structural flexibility and lateral interactions may play a role in spectrin tetramerization.     

Impact fatigue of a polycarbonate/acrylonitrile-butadiene-styrene blend

This study analyzes the impact properties of a polycarbonate/acrylanitrile-butadiene-styrene (PC/ABS) blend. The specimens were prepared under various injection molding conditions, including filling time, melting temperature, and mold temperature. Impact tests were performed with a Dynatup drop weight impact tester at different impact energies (10, 15, 20, 25 J). The fracture mechanism was examined with a scanning electron microscopy. The results indicated that the load-time history of the PC/ABS blend has approximately a sinusoidal form in impact. The best injection molding conditions are a filling time of 12 s, a melting temperature of 260°C and a mold temperature of 80°C. In this case, the specimen shows the highest energy absorbed in single impact, together with the highest impact number in impact fatigue. The impact number and the accumulation energy seem to follow an exponential curve as the impact energy decreases. The PC/ABS blend material clearly exhibited ductile fracture with a continuous reduction in strength by viscoplastic deformation. The higher the impact number, the higher the accumulation energy. The accumulation energy of impact fatigue with impact energy 10 J is about 35–45 times greater than the energy absorbed in single impact. Tearing, shear fracture, and plastic deformation are the major fracture mechanisms of the PC/ABS blend matrix in single impact and repeated impact conditions.     

Age differences in the likelihood of destructive anger responses under different relationship contexts: A comparison of mainland and Hong Kong Chinese.

This brief report examined how the likelihood of destructive anger responses varied with age across relationship contexts. Seventy-six older adults and 100 younger adults from Hong Kong and Mainland China reported their responses to anger-eliciting scenarios elicited by a kin, a close or a casual friend. Results indicated that compared with their younger counterparts, older Hong Kong Chinese were less likely to report direct aggression toward kin, but older Mainland Chinese were more likely to do so. Older Hong Kong Chinese were less likely to report malevolent and fractious motives than were younger Chinese across all relationships; Older Mainland Chinese were less likely to do so only in friendship. Findings have implications for conceptualizing age-related emotion regulation across relationships and cultures. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Numerical study of multiplanar tubular DX-joints subject to axial loads

In this paper, 20 multiplanar DX-joints (double X) with in-plane braces and out-of-plane braces subjected to various combination of axial loads were analysed. The multiplanar effect of loaded and unloaded out-of-plane braces and the load-interaction of multiplanar DX-joints were investigated. The influence of geometric parameters on the stress concentration factors of the joints was also studied. The results obtained from the analyses of multiplanar DX-joints are compared with those of the corresponding uniplanar X-joints. It is found that, when the out-of-plane braces are not loaded, the multiplanar effect is not significant when the brace diameter is much smaller than the chord diameter. When the out-of-plane braces are loaded, the hot spot stresses are found to be lower or higher than the values predicted based on uniplanar joints. The deviation can be as much as 87% or 94%, respectively, depending on the combination of the load conditions and geometrical parameters.     

Sending memorable messages to the old: Age differences in preferences and memory for advertisements.

Socioemotional selectivity theory holds that people of different ages prioritize different types of goals. As people age and increasingly perceive time as finite, they attach greater importance to goals that are emotionally meaningful. Because the goals that people pursue so centrally influence cognition, the authors hypothesize that persuasive messages, specifically advertisements, would be preferred and better remembered by older adults when they promise to help realize emotionally meaningful goals, whereas younger adults would not show this bias. The authors also predict that modifying time perspective would reduce age differences. Findings provide qualified support for each of these predictions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Asymptotic Properties of Order Statistics Correlation Coefficient in the Normal Cases

We have previously proposed a novel order statistics correlation coefficient (OSCC), which possesses some desirable advantages when measuring linear and monotone nonlinear associations between two signals. However, the understanding of this new coefficient is far from complete. A lot of theoretical questions, such as the expressions of its distribution and moments, remain to be addressed. Motivated by this unsatisfactory situation, in this paper we prove that for samples drawn from bivariate normal populations, the distribution of OSCC is asymptotically equivalent to that of the Pearson's product moment correlation coefficient (PPMCC). We also reveal its close relationships with the other two coefficients, namely, Gini correlation (GC) and Spearman's rho (SR). Monte Carlo simulation results agree with the theoretical findings.