Temperature distribution in Li2O pellets under neutron irradiation

The center temperature of Li₂O pellets under neutron irradiation was measured using an encapsuled pin. The surface temperatures of the pellets and the pellet/cladding heat transfer coefficients were estimated on the basis of the well-known conductivity integral.     

A Method for Received Waveform Reconstruction Based on Bender Element Test Using Frequency-swept Signal

An experimental technique for reconstructing the received wave of bender element tests based on linear system theory is shown in this paper. In order to identify the frequency response of testing apparatus, bender element tests using frequency-swept signals are performed. Received waves for one-period sine pulse transmitting with various frequencies are calculated and compared with observed waves in several kinds of soil samples and testing apparatuses. The linearity of the testing system is also confirmed by coherence function. It is shown that calculated data are less affected by random noise and show good agreement with observed data in regards to not only waveform itself but also resulting shear wave velocity. It is mentioned that this technique can provide simulations for arbitrary transmitted waveform with high signal/noise ratio after laboratory tests are performed. It is also mentioned that this technique is advantageous when sufficient amplitude of received wave cannot be ensured or shear wave velocity must be verified, for example, due to uncertainty of arrival time by near-field effect.     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

Investigation of the voltage life of mica-alumina composite insulation at high temperatures

Experiments and investigations were carried out on the voltage life of a bar-coil model with a nickel-plated copper conductor covered with mica-alumina composite insulation at a temperature range of 550–850 °C. Diffusion of copper into the insulation layer was observed on the specimens aged for a long period. Insulation with mica paper gave faster diffusion speed and shorter voltage life than insulation with mica flake. The diffusion speed became higher with an increase in temperature. The ac current gradually increased with aging time and increased rapidly just before breakdown. There was the relationship I = aEⁿ (a, n: constants) between ac current I and applied stress E, and n was approximately equal to 1 in the region where thermal unbalance did not occur. Arrhenius's law held in the relationship between ac current and aging time. Therefore, the breakdown mechanism might be that the effective insulation thickness decreased due to copper diffusion into the insulation layer and the ac current increased gradually until thermal breakdown in the last stage. If copper diffuses into the insulation layer, even with no voltage application, the aging time required to decrease the breakdown voltage to a certain level (the voltage life) obeys Arrhenius's law. If the voltage life is dominated by diffusion into the insulation layer, the activation energy for voltage life in the aging test becomes twice that for diffusion, both with and without voltage application. © 1999 Scripta Technica, Electr Eng Jpn, 129(4): 24–31, 1999     

Staphylococcus aureus Infection-Related Glomerulonephritis with Dominant IgA Deposition

Since 1995, when we reported the case of a patient with glomerulonephritis with IgA deposition that occurred after a methicillin-resistant Staphylococcus aureus (MRSA) infection, many reports of MRSA infection-associated glomerulonephritis have accumulated. This disease is being systematized as Staphylococcus infection-associated glomerulonephritis (SAGN) in light of the apparent cause of infection, and as immunoglobulin A-dominant deposition infection-related glomerulonephritis (IgA-IRGN) in light of its histopathology. This glomerulonephritis usually presents as rapidly progressive glomerulonephritis or acute kidney injury with various degrees of proteinuria and microscopic hematuria along with an ongoing infection. Its renal pathology has shown several types of mesangial and/or endocapillary proliferative glomerulonephritis with various degrees of crescent formation and tubulointerstitial nephritis. IgA, IgG, and C₃ staining in the mesangium and along the glomerular capillary walls have been observed on immunofluorescence examinations. A marked activation of T cells, an increase in specific variable regions of the T-cell receptor β-chain-positive cells, hypercytokinemia, and increased polyclonal immune complexes have also been observed in this glomerulonephritis. In the development of this disease, staphylococcal enterotoxin may be involved as a superantigen, but further investigations are needed to clarify the mechanisms underlying this disease. Here, we review 336 cases of IgA-IRGN and 218 cases of SAGN.     

Detection of norovirus RNA in bivalve molluscs by using bacteria-culture-employed method (A3T method)

Norovirus (NV) RNA has rarely been detected in foods despite the use of highly sensitive methods such as RT-PCR and real-time RT-PCR. In the modified method (A3T method) reported previously, a bacterial culture process was introduced into the standard protocol for NV detection to remove some inhibitor(s) present in food ingredients. To confirm the efficiency of the A3T method and to examine NV contamination in bivalve molluscs, we tried to detect NV RNA in bivalve molluscs on the market and in oyster samples associated with foodborne outbreaks by using the standard method and the A3T method. NV RNAs were detected in 20 samples (18.0%) of 111 bivalve molluscs, including oysters, on the market by use of the A3T method, while only one sample (0.9%) was positive according to the standard method. NV RNA was also detected in 10 of 35 oyster samples related to foodborne outbreaks by the A3T method. Those results show that the A3T method is suitable for the detection of NV in bivalve molluscs in general laboratories.     

Poly(thienylenevinylene) prepared by ring-opening metathesis polymerization: Performance as a donor in bulk heterojunction organic photovoltaic devices

Poly(3,4-dioctylthienylenevinylene) (PDOTV) was synthesised by ring-opening metathesis polymerization (ROMP) with controlled molecular weight. PDOTV has been used to fabricate organic photovoltaic devices in combination with phenyl C₆₁-butyric acid methyl ester (PCBM) for the first time. The devices show power conversion efficiency up to 0.18%. Optimal device performance was found at a film thickness of 100 nm and a ratio of PCBM to PTV of 2:1. External quantum efficiency (EQE) measurements, transient absorption spectroscopy and morphology studies were carried out to establish factors governing photovoltaic performance. These results suggest that the efficiency values for the devices were limited by the hole mobility and unexpected phase separation within the blend. Nevertheless, the results show that ROMP is a viable, alternative, synthetic strategy for preparing PTV donors for use in bulk heterojunction OPVs.     

New approach for synthesis of activated carbon from bamboo

Unconventional pretreatment, that is, delignification and the addition of guanidine phosphate, was performed for the synthesis of activated carbon having a high specific surface area from bamboo by physical activation. The values of the specific surface area, total pore volume, and average pore size depended on the amount of added guanidine phosphate and the CO₂ activation time. The amount of the added guanidine phosphate under the optimum conditions for the highest specific surface area was much lower than that of the phosphorous acid chemical activator under conventional conditions. The N₂ adsorption isotherms of all the samples were type I, which means that micropores were dominant. The pore sizes of the samples in this study were similar to that of the physically-activated carbon. Therefore, the activation process was presumed to be essentially not chemical, but physical. The relation between the yield and the specific surface area improved with the addition of guanidine phosphate. The reason for the improvement may be the change in the reactivity of the carbon material generated during the heating process. The maximum specific surface area was ca. 2000 m² g^?1, which is a high value for a physically-activated carbon.     

Thermal decomposition of cellulose/synthetic polymer blends containing grafted products. V. Cellulose/polystyrene blends

Homogeneous grafting of styrene onto cellulose was carried out in a dimethylacetamide/lithium chloride solvent system. The grafted products were added to cellulose/polystyrene (PS) blends as compatibilizers. The thermal decomposition behavior of the blends was investigated by thermogravimetry. The thermal stability of the blends decreased with an increase in grafted product content. The crystallinity of the blends decreased with grafted product content. The microphase‐separated structures of the blends became finer with grafted product content. The glass transition temperatures for cellulose and PS in the blends were lowered with grafted product content. Differences in thermal decomposition behavior of the blends were correlated with compatibility. Thermogravimetry was effective for compatibility estimation in cellulose/PS blends containing grafted products. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010