Familial occurrence of congenital bile duct cysts

Congenital bile duct cysts are now a well-documented anomaly of the biliary tree, and have become more common in Japan. Familial occurrence of congenital bile duct cysts, however, is extremely rare, with only six reported cases in the literature. We report a familial pattern of congenital bile duct cysts in a mother and her daughter. A 33-year-old female was admitted for evaluation of right upper quadrant abdominal pain and fever 6 days after an uneventful delivery of her second child. A computed tomography (CT) and ultrasound scan (US) revealed an obstructed biliary tract. Percutaneous transhepatic biliary drainage was then performed, and a cholangiogram revealed a Scholtz type B choledochocele without an anomalous connection of the pancreaticobiliary ducts. Endoscopic US demonstrated that the choledochocele was associated with a stone in the cyst. A pylorus-preserving pancreatoduodenal resection was performed, and a histological study revealed that the choledochocele was lined by biliary mucosa without evidence of malignancy. The newborn infant had an abdominal tumour. An US and CT revealed a congenital bile duct cyst. An operation was performed and the intraoperative cholangiogram showed an Alonso-Lej type I congenital bile duct cyst with an anomalous connection of the pancreaticobiliary ducts. Whether congenital bile duct cysts are hereditary remains to be elucidated.     

Iodine-123-BMIPP myocardial washout and cardiac work during exercise in normal and ischemic hearts

Due to the changes in the frequency of penicillin-resistant strains of S. pneumoniae, it is necessary to perform surveillance studies of bacterial resistance. Isolates from the upper respiratory tract of asymptomatic children have been useful. There is no information about the difference between isolates from children with and without upper respiratory tract infection (URTI). The objective of the authors in this paper is to establish the prevalence of carrier-state, serotype and antimicrobial resistance of S. pneumoniae isolates from children with and without acute upper respiratory tract infection (URTI) in a rural area in Mexico. A cross-sectional comparative study was performed in Tlaxcala, Mexico. Children from one month 5 years of age were included. Nasopharyngeal swabs were obtained. Identification was done by international microbiology standards. Serotyping was done by the capsular Quellung test. The susceptibility testing was performed by the agar dilution method. Four-hundred and fifty patients were included. S. pneumoniae was isolated in 134 children (29.7%). Frequency of carriers was greater in patients with URTI (107/323) than without URTI (27/127) (33.1% vs. 21.1% p = 0.012, OR 1.84, IC 95% 1.1-3.08). The six most frequent serotypes were: 6B (16.4%); 19F (11.9%); 19A (6.7%); 14, 23F, and 35 (5.2% each), with no difference among the groups. Only 3% of the strains had high level resistance to penicillin, and 12.6% had intermediate resistance, and for ampicillin 4%, amoxicillin 4%, amoxicillin-clavulanate 4%, ceftriaxone 3%, cefotaxime 1.5%, erythromycin 6%, miocamycin 3%, chloramphenicol 4%, and vancomycin 0%. Trimethoprim-sulfamethoxazole resistance was very high (42%). In conclusion, colonization is higher in children with URTI. Five of the most frequent serotypes identified in this study were the same as those identified in patients with S. pneumoniae invasive diseases in Mexico City. In Tlaxcala, Mexico, beta-lactams could be the drug of choice for the treatment of S. pneumoniae lower respiratory tract infections. It is necessary to perform clinical assays to evaluate the efficacy of trimethoprim-sulfamethoxazole due to the high resistance in vitro.     

IgG from Adult Atopic Dermatitis (AD) Patients Induces Thymic IL-22 Production and CLA Expression on CD4+ T Cells: Possible Epigenetic Implications Mediated by miRNA

Atopic dermatitis (AD) is a common relapsing inflammatory skin disorder characterized by immune-mediated inflammation and epidermal barrier dysfunction. The pathogenesis of AD is multifactorial and has not been fully elucidated to date. This study aimed to evaluate whether serum IgG from adult AD patients could modulate the thymic maturation of IL-22-producing T cells and CLA+ T cells of non-atopic infants. Given that miRNAs regulate immune response genes, we evaluated whether miRNA expression is also altered in cultured thymocytes. Thymocytes were cultured with purified IgG from AD patients or control conditions (mock, Intravenous-IgG (IVIg), non-atopic IgG, or atopic non-AD IgG). Using flow cytometry analysis, we assessed the expression of CLA and intracellular levels of IL-4, IFN-γ, and IL-22 on double-positive T cells (DP T), CD4 T cells, or CD8 T cells. We also investigated the frequency of IgG isotypes and their direct interaction with the thymic T cells membrane. The miRNA profiles were evaluated by the Illumina small RNA-seq approach. MiRNA target gene prediction and enrichment analyses were performed using bioinformatics. Increased frequencies of IL-22 and CLA+ producing CD4+ T cells cultured with IgG of AD patients was seen in non-atopic infant thymocytes compared to all control conditions. No alterations were observed in the frequency of IgG isotypes among evaluated IgG pools. Evidence for a direct interaction between IgG and thymic DP T, CD4 T, and CD8 T cells is presented. The small RNA-seq analysis identified ten mature miRNAs that were modulated by AD IgG compared to mock condition (miR-181b-5p, hsa-miR-130b-3p, hsa-miR-26a-5p, hsa-miR-4497, has-miR-146a, hsa-let-7i-5p, hsa-miR-342-3p, has-miR-148a-3p, has-miR-92a and has-miR-4492). The prediction of the targetome of the seven dysregulated miRNAs between AD and mock control revealed 122 putative targets, and functional and pathway enrichment analyses were performed. Our results enhance our understanding of the mechanism by which IgG can collaborate in thymic T cells in the setting of infant AD.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Improvement in Mechanical Properties of Powder-Processed MoSi2 by the Addition of Sc2O3 and Y2O3

Additions of 1-20 mol% Sc₂O₃ or Y₂O₃ to MoSi₂ eliminate glassy SiO₂, which improves mechanical properties at both ambient and high temperatures. In particular, only 1 mol% ScO₃ additions dramatically enhance three-point bending strength from 521 to 1081 MPa. Vickers hardness, Young's modulus, fracture toughness, and high-temperature strength are also improved by this low level of additive. The improvement of mechanical properties is attributed to the formation of crystalline silicates: Sc₂Si₂O₇, Y₂Si₂O₇, Y₂SiO₅, and Y₄Si₃O₁₂, which are analyzed by XRD, SEM-EDS, and TEM-EDS methods.     

Current distribution in a two-dimensional narrow gap cell composed of a gas evolving electrode with an open part

On the basis of the observation of gas bubbles evolved by electrolysis, a two-dimensional vertical model cell composed of electrodes with open parts for releasing gas bubbles to the back side is proposed. The model cell consists of two layers. One layer forms a bubble curtain with a maximum volume fraction of gas bubbles in the vicinity of the working electrode with open parts. The other. being located out of the bubble layer, is a convection layer with a small volume fraction distributed in the vertical direction under forced convection conditions. The cell resistance and the current distribution were computed by the finite element method when resistivity in the back side varied in the vertical direction along the cell. The following three cases for overpotential were considered: no overpotential, overpotential of the linear type and overpotential of the Butler-Volmer type. It was found that the cell resistance was determined not only by the interelectrode gap but also by the percentage of open area and in some cases by the superficial surface area. The cell resistance varied only slightly with the distribution of the bubble layer in the back side.Nomenclature b linear overpotential coefficient given byb=/i - C proportionality constant given by Equation 15 - d ₁ distance between front side of working electrode and separator - d ₂ thickness of separator - F Faraday constant - I total current per half pitch - i current density at working electrode - i ₀ exchange current density - L length of a real electrolysis cell - n number of electrons transferred in electrode reaction - O _p percentage of open area given by Equation 1 - p pitch, i.e. twice the length of the unit cell, defined by 2(BC) in Fig. 4 - q thickness of bubble curtain, defined by (AM) in Fig. 4 - R gas constant - r _t total cell resistance - r unit-cell resistance defined by (V – V _eq)/I - r _rs residue ofr from sum ofr ₀ andr - r ₀ ohmic resistance of solution when0 _p=0 - r resistance due to overpotential when0 _p=0 - s electrode surface ratio or superficial surface area given by Equation 2 for the present model - T absolute temperature - t thickness of working electrode defined by EF in Fig. 4 - V cell voltage - V _eq open circuit potential difference between working and counter electrodes - solution velocity in cell - ₀ solution velocity at bottom of cell - w width of working electrode, defined by 2(DE) in Fig. 4 - x abscissa located on cell model - y ordinate located on cell model - anodic transfer coefficient - linear overpotential kinetic parameter defined byb/[_bc(p/2)] - d infinitesimally small length on the boundary - volume fraction of gas bubbles in cell - dimensionless cell voltage defined bynF(V – V _eq)/RT - overpotential at working electrode - Butler-Volmer overpotential kinetic parameter defined by [nFi _0bc(p/2)]/RT - coordinate perpendicular to boundary of model cell - ₁ resistivity of bubble-free solution - ₂ resistivity of separator - _bc resistivity of bubble curtain - potential in cell     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

Glyme-based nonaqueous electrolytes for rechargeable lithium cells

Poly(ethylene glycol)dimethyl ethers [(CH₃O(CH₂CH₂O)_nCH₃, n = 1, 2, 3, and 4)] are generally known as “glymes”. This study examines the conductivity, lithium ion solvation state and charge-discharge cycling efficiency of lithium metal anodes in glyme-based electrolytes for rechargeable lithium cells. 1 M (M: mol l⁻¹) LiPF₆ was used as the solute. The properties of the glymes were investigated by using a ternary mixed solvent consisting of n-glyme, ethylene carbonate (EC) and methylethylcarbonate (MEC). This was because the solubility of LiPF₆ is far less than 1 M in an n-glyme single solvent. The glyme solutions exhibited higher conductivity and higher lithium cycling efficiency than EC/MEC. The conductivity tended to increase with decreases in ethylene oxide chain number (n) and solution viscosity. The decrease in the solution viscosity resulted from the change in the lithium ion solvation structure that occurred when a glyme was added to EC/MEC. The selective solvation of the glyme with respect to lithium ions was clearly demonstrated by -NMR measurements. The lithium cycling efficiency value depended on the charge-discharge current (I_ps). When n increased there was an increase in lithium cycling efficiency at a low I_ps and a decrease in the reduction potential of the glymes. When the conductivities including those at low temperature (below 0 °C), and charge-discharge cycling at a high current are taken into account, di- or tri-glyme is superior to the other glymes tested here.     

Effects of cyclic tensile loading on the rupture behavior of orthogonal 3-D woven SiC fiber/SiC matrix composites at elevated temperatures in air

This study examined the rupture mechanisms of an orthogonal 3D woven SiC fiber/BN interface/SiC matrix composite under combination of constant and cyclic tensile loading at elevated temperature in air. Monotonic tensile testing, constant tensile load testing, and tension–tension fatigue testing were conducted at 1100 °C. A rectangular waveform was used for fatigue testing to assess effects of unloading on the damage and failure behavior. Microscopic observation and single-fiber push-out tests were conducted to reveal the rupture mechanisms. Results show that both oxidative matrix crack propagation attributable to oxidation of the fiber–matrix interface and the decrease in the interfacial shear stress (IFSS) at the fiber–matrix interface significantly affect the lifetime of the SiC/SiC composites. A rupture strength degradation model was proposed using the combination of the oxidative matrix crack growth model and the IFSS degradation model. The prediction roughly agreed with the experimentally obtained results.