Computer aided kinetic modeling with KMT and KME

The complexity of many chemical and refining reaction systems and the thus-derived tedious and time-consuming process of building the associated kinetic models have been major obstacles in the use of fundamental kinetics in the solution of chemical engineering problems. This review summarizes work aimed at removing theses obstacles. Our recent work that has led to the enhancement of the Kinetic Modeler's Toolbox (KMT) and the development of the Kinetic Model Editor (KME) presents an end-to-end solution to the kinetic modeling process, including automated feedstock modeling, reaction network construction, kinetic rate estimation, model programming, process system configurations, model customizations, compilations, model execution and results analysis.     

Novel sulfated oligosaccharides containing 3-O-sulfated glucuronic acid from king crab cartilage chondroitin sulfate K. Unexpected degradation by chondroitinase ABC

We prepared a series of oligosaccharides from king crab cartilage chondroitin sulfate K after exhaustive digestion with testicular hyaluronidase, and determined the structures of four tetrasaccharides and a pentasaccharide by fast atom bombardment mass spectrometry, high performance liquid chromatography analysis of chondroitinase AC-II digests, and 500-MHz 1H NMR spectroscopy. The tetrasaccharides shared the common core structure GlcAbeta1-3GalNAcbeta1-4GlcAbeta1-3GalNAc with various sulfation profiles. One structure was GlcAbeta1-3GalNAc(4S)beta1-4GlcAbeta1-3GalNAc(4S), whereas three of them have the following hitherto unreported structures including a novel glucuronate 3-O-sulfate: GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcAbeta1-3GalNAc(4S), GlcAbeta1-3GalNAc(4S)beta1-4GlcA(3S)beta1-3GalNAc(4S), and GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcA(3S)beta1-3GalNAc(4S), where 3S or 4S represents 3-O- or 4-O-sulfate, respectively. The structure of the pentasaccharide was determined as GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcA(3S)beta1- 3GalNAc(4S)beta1-4GlcA. Chondroitinase ABC digestion of the tetrasaccharides with GlcA(3S) at the internal position destroyed the disaccharide unit containing GlcA(3S) derived from the reducing side and resulted in only the disaccharide unit from the non-reducing side. In contrast, these tetrasaccharides remained totally resistant to chondroitinase AC-II. The results indicated that it is necessary to reevaluate the disaccharide composition of chondroitin sulfate poly- or oligosaccharides purified from various biological sources, since they were usually determined after chondroitinase ABC digestion. It is probable that the structures containing GlcA(3S) would not have been detected.     

Effect of sulfasalazine on B cell hyperactivity in patients with rheumatoid arthritis

OBJECTIVE: We investigated the in vitro immunomodulatory effects of sulfasalazine on B cells in rheumatoid arthritis (RA). METHODS: Reversed hemolytic plaque assay and 3H-thymidine incorporation were measured. RESULTS: B cells from patients with RA showed hyperactivity to stimulation by Staphylococcus aureus Cowan I. Sulfasalazine significantly inhibited this B cell hyperactivity in a dose dependent manner. The kinetic study and a decrease in 3H-thymidine incorporation on Day 3 indicate that sulfasalazine inhibited the early phase (0-48 h) of B cell proliferation in these patients. Sulfapyridine also inhibited B cell hyperactivity in these patients, but 5-aminosalicylic acid and N-acetylsulfapyridin had no significant effect. CONCLUSION: Sulfasalazine exhibited a direct immunosuppressive effect on B cell hyperactivity in patients with RA, which may be responsible for its therapeutic effectiveness in this disorder.     

Development of a Cyclogyro-Based Flying Robot With Variable Attack Angle Mechanisms

This paper presents an experimental study on the development of a cyclogyro-based flying robot with a new variable angle of attack mechanism. A cyclogyro is a flying machine supported in the air by power-driven rotors that rotate about a horizontal axis, like the paddle-wheels of a steamboat. Machines of this type have been designed by some companies but there has been no record of any successful flights. Our design starts with a new variable angle of attack mechanism with an eccentric (rotational) point in addition to a rotational point connecting to a motor. The main feature of the mechanism with the eccentric rotational point is the ability to change attack of angles in accordance with the wing positions (as determined by the rotational angles of the cyclogyro) without actuators. The design parameters (wing span, the number of wings, and eccentric distance) of the flying robot are determined through a series of experiments. Experimental results show that the cyclogyro-based flying robot with the new variable angle of attack mechanism is capable of generating sufficient lift force for flying.     

Precise rendering method for exact anti-aliasing and highlighting

This paper introduces the Precise Rendering Method, which generates accurately anti-aliased and highlighted images from tessellated polygons. The Precise Rendering Method first solves the aliasing problems of hidden surface removal by using the Cross Scanline Algorithm. This algorithm can exactly calculate polygon areas projected onto each pixel by using horizontal and vertical scanlines. Aliasing artifacts in shading are then prevented by the Reflection Intergration Method, which analytically integrates the intensity of reflection in the solid angle defined by surface normals at vertices of the projected area. Several synthesized images are created to show the efficiency of the Precise Rendering Method.     

Oxygen consumption for constant work is minimal at lowest working contractility in normal dog hearts

We tested whether minimal myocardial oxygen consumption (MVO2) for a given external work would exist in the middle of a normal contractility range as previously predicted theoretically. The left ventricle of the excised cross-circulated dog heart preparation was connected to a volume servo pump. Myocardial contractility in terms of ventricular end-systolic elastance (Emax) was gradually increased from control 8.9 +/- 3.4 (mean +/- SD) to 30.0 mmHg/(ml/100 g) by epinephrine and decreased to 1.8 mmHg/(ml/100 g) by propranolol while heart rate, end-systolic pressure and stroke work were kept constant. MVO2 was determined as the product of total coronary flow and coronary arteriovenous oxygen content difference in each contractile state. We plotted MVO2 values against E(max) values in each heart. The MVO2-E(max) relation for a constant cardiac work showed that MVO2 was minimal at the low end of the covered E(max) range. We conclude that minimal MVO2 for a given cardiac work is generally obtained at the lowest working contractility in normal dog hearts. This conclusion might pose some problems in the previous theoretical prediction as to the contractility that achieves the minimal MVO2 in a given external work.     

Subacute toxicity of piperonyl butoxide in ICR mice

Piperonyl butoxide, alpha-[2-(2-butoxyethoxy)ethoxy]-4,5-methylenedioxy-2-propyltol uene, is a pesticide synergist. ICR mice of both sexes were maintained on diet containing 0, 0.1, 0.3 or 0.9% of piperonyl butoxide for 20 days. At the end of the experimental period, they were necropsied. Selected organs were weighed and serum chemistries were analyzed. In male and female mice of the 0.9% group, body weight, kidney and spleen weight were depressed in comparison to those of control group. Liver weight of the 0.3 and 0.9% group of both sexes were significantly higher than those of control group. Mice of the 0.9% group of both sexes had increased serum levels of cholesterol, total protein, gamma-glutamyl transpeptidase. Histological examination of livers from mice of the 0.9% group by light microscopy showed enlarged hepatocytes, anisonucleosis and single cell necrosis. The results indicated that subacute toxicity of piperonyl butoxide in ICR mice was directed primarily at liver.     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

Development of `information collection and delivery sensor basesystem' for large-scale power systems

The authors present a real-time database system capable of collecting and delivering a large amount of information accurately at a high speed and by a simple method. This system has a microprocessor unit (MPU) for each private communication line around the main memory and coordinates the independent parallel operation for a number of these MPUs with the main memory access operation, using a fixed cyclic scan method and having all the MPUs perform multi-operation. Many advantages can be expected when this method is adopted, especially for the monitoring and control of power systems. Degradation of the system can be avoided during an information rush due to accidents, and it can be easily extended when adding to or expanding the power facilities in the future. Excellent daily maintainability can be assured, and a low overall cost can be expected