Antimicrobial susceptibilities of Salmonella isolates obtained from layer chicken houses on a commercial egg-producing farm in Japan, 1997 to 2002

Susceptibility to antimicrobial agents was examined for 325 isolates of Salmonella enterica serotypes Cerro, Infantis, Livingstone, and Montevideo isolated from layer houses on a commercial egg-production farm in the western region of Japan between 1997 and 2002. No antimicrobials were used for therapeutic purposes on the farm during this period. From 1.8 to 3.1% of the isolates were resistant to ampicillin, chloramphenicol, and tetracycline. Resistance to streptomycin and sulfisoxazole was found in 52.9 and 65.5%, respectively, of Salmonella Montevideo isolates and in 0 to 13.2% of the isolates of the other serotypes. All the streptomycin-resistant isolates of Salmonella Montevideo also exhibited resistance to sulfisoxazole. Salmonella Montevideo isolates were first isolated in 1998, and 80.0% of the isolates obtained in this year were resistant to streptomycin and sulfisoxazole. The results suggest that Salmonella Montevideo isolates that had already acquired resistance may have been introduced into the layer houses, although the route and vehicle of transmission were uncertain. The proportion of Salmonella Montevideo isolates resistant to streptomycin and sulfisoxazole significantly decreased (P < 0.01) from 79.5% for 1998 through 1999 to 37.3% for 2000 through 2002. This decrease probably was due to the fact that no antimicrobials were used on the farm. Among 10 isolates from different serotypes obtained from 1997 to 2002 that were resistant to ampicillin, two and five isolates harbored 42- and 63-kb R plasmids and identical DraI restriction enzyme digest patterns, respectively, and carried the blaTEM gene. The results suggest that the ampicillin resistance determinants were transferred among different serotypes of Salmonella in the layer houses.     

Fabrication, Sinterability, and Mechanical Properties of Lead Zirconate Titanate/Silver Composites

High-toughness and high-strength lead zirconate titanate (PZT) composites that contain fine silver particles were successfully fabricated at low sintering temperatures. Addition of silver to a PZT matrix did not result in unwanted reaction phases; however, some silver diffused toward the perovskite crystal structure. A small quantity of silver accelerated the sinterability of the PZT composites. The formation of oxygen vacancies due to the partial substitution of silver appeared to enhance the sinterability of the PZT. Fracture toughness depended on the size and degree of sphericity of the silver particles, and SEM observations on crack propagation suggested that the toughening mechanism in the PZT/Ag composites involves crack bridging resulting from the ductile behavior of silver particles. It is proposed that high fracture strength in PZT/1 to 5 vol% Ag composites results from the relaxation of transformation-induced internal stress by the silver particles.     

Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.     

Steam Reforming of Methanol on Copper Catalysts Supported on Large-Surface-Area ZnAl2O3

Steam reforming of methanol on various supported Cu catalysts was examined. Supports strongly affected catalyst activity and, among the catalysts tested, Cu catalyst supported on large-surface-area ZnAl₂O₄ showed the highest activity, which, to the best of our knowledge, was higher than those for the supported catalysts reported so far. For supported Cu catalysts, two species were observed. One was a dispersed Cu species having strong interaction between Cu and support, and the other was an isolated Cu species. The activity of the former species strongly depended on supports.     

Gel permeation chromatography of polyoxymethylene

Gel permeation chromatography of polyoxymethylene has been studied using N,N-dimethylformamide as the solvent. Polyoxymethylene samples used here are a copolymer of tetraoxane with 1,3-dioxolane and a commercial polyoxymethylene whose molecular weight distributions are moderately broad. Their intrinsic viscosities [η] range from 1.4 to 2.8 dl/g. Factors affecting chromatograms are discussed, and the operating conditions were determined by using the analytical scale GPC. On the basis of these operating conditions, the molecular weight fractionation of polyoxymethylene was carried out by using the preparative scale GPC. It was found that polyoxymethylene can be effectively fractionated to give seven to ten fractions each of them containing the fractionated polymer ranging in weight from 0.2 to 8 mg when 40 mg polymer sample was used for a run of the measurement. The fractionated polymers were also found to have a narrow molecular weight distribution within a single peak, and their M_w/M_n values decrease with increasing molecular weight.     

Steam reforming on Ni-samaria-doped ceria cermet anode for practical size solid oxide fuel cell at intermediate temperatures

Direct internal and external reforming operations on Ni-samaria-doped ceria (SDC) anode with the practical size solid oxide fuel cell (SOFC) at intermediate temperatures from 600 to 750 °C are carried out to reveal the reforming activities and the electrochemical activities, being compared with the hydrogen-fueled power generation. The cell performance with direct internal and external steam reforming of methane and their limiting current densities were almost the same irrespective of the progress of reaction in the methane reformate at 700 and 750 °C. The durability test for 5.5 h at 750 °C with direct internal reforming operation confirmed that the cell performance did not deteriorate. The operation temperature of the cell controlled the reforming activities on the anode, and the large size electrode gave rise to high conversion due to the slow space velocity of the steam reforming. Direct internal steam reforming attained sufficient level of conversion for SOFC power generation with methane at 700 and 750 °C on the large Ni-SDC cermet anode.     

Orientation and Grain Boundary Microstructure of Alumina in Al/Al2O3 Composites Produced by Reactive Metal Penetration

The orientation and grain boundary microstructure of alumina in reactive metal penetration Al/Al₂O₃ composites are studied using orientation imaging microscopy and the results are compared with those of sintered polycrystalline Al₂O₃. The interconnected Al₂O₃ in the composite material is separated by Σ3 boundaries (twins) with a 60° rotation around the [0001] direction. A high frequency (∼100%) of Σ3 coincidence boundaries in composite alumina is remarkable since only ∼12% of boundaries in a sintered polycrystalline Al₂O₃ are of special nature. The coincidence boundaries in the in situ alumina grow in a coherent and faceted manner.     

水中隐孢子虫和贾第鞭毛虫的替代检测指标

美国国家环保局（USEPA）制定并发布的1623方法是目前国际上常用的水中隐孢子虫和贾第鞭毛虫标准检测方法，该方法存在成本高、回收率低等缺陷。各国研究者试图通过考察其他水质指标与两虫的相关关系来寻找两虫密度和活性的有效替代指标，以间接反映两虫在水体中的存在水平，其中包括浊度、颗粒计数等物理学指标以及细菌、细菌孢子、病毒、噬菌体等生物学指标。虽然还未得出具有普遍性的结论，但研究表明颗粒计数、好氧孢子等有可能成为有效的两虫替代指标。     

Mechanism of elongation of gold or silver nanoparticles in silica by irradiation with swift heavy ions

It has been reported that elongated Au nanoparticles oriented parallel to one another can be synthesized in SiO₂ by ion irradiation. Our aim was to elucidate the mechanism of this elongation. We prepared Au and Ag nanoparticles with a diameter of 20 nm in an SiO₂ matrix. It was found that Au nanoparticles showed greater elongated with a higher flux of ion beam and with thicker SiO₂ films. In contrast, Ag nanoparticles split into two or more shorter nanorods aligned end to end in the direction parallel to the ion beam. These experimental results are discussed in the framework of a thermal spike model of Au and Ag nanorods embedded in SiO₂. The lattice temperature exceeds the melting temperatures of SiO₂, Au and Ag for 100 ns after one 110 MeV Br¹⁰⁺ ion has passed through the middle of an Au or Ag nanorod.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.