Volatile aroma components and antioxidant activities of the flavedo peel extract of unripe Shiikuwasha (Citrus depressa Hayata)

The flavedo peel extracts of unripe Shiikuwasha (Citrus depressa Hayata) fruits were extracted using steam distillation (SD) or a cold-press (CP) system. Volatile aroma content and composition were determined using gas chromatography (GC) and each compound was identified using gas chromatography-mass spectrophotometry (GC-MS). The major constituents of the extracts were monoterpene hydrocarbons (91.75-93.75%[709.32-809.05 mg/100 g of fresh flavedo peel]) including limonene (43.08-45.13%[341.46-379.81 mg/100 g of fresh flavedo peel]), γ-terpinene (27.88-29.06%[219.90-245.86 mg/100 g of fresh flavedo peel]), and p-cymene (8.13-11.02%[61.47-97.22 mg/100 g of fresh flavedo peel]). The extraction process used was determined to be a decisive factor that affects the composition of key citrus aroma components, as well as the antioxidant activities of the Shiikuwasha fruit. Antioxidant capabilities of the extracts were examined by assay of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity and β-carotene bleaching inhibition. The cold-press extraction system may better retain the total phenolic content of the flavedo peel and display superior antioxidant activities, compared to the steam distillation extraction method. PRACTICAL APPLICATION: Shiikuwasha (Citrus depressa Hayata) is a type of small citrus fruit, and has been used as raw material for beverage and food additive productions in Japan. It had a unique aroma composition in which the limonene content of its peels is lower than that of other commonly known citrus peels. The present study detailed the volatile aroma composition, as well as antioxidant capabilities of Shiikuwasha peel extracts of different extraction methods, that are cold-press and steam distillation methods. The results of this study may provide a basis for selection of Shiikuwasha peel extracts in food industry for citrus flavor production.     

Short communication: estimation of plasma osmolality from plasma electrolytes, glucose, and urea in calves

Plasma osmolality estimated from plasma concentrations of Na+, Cl-, K+, glucose, and urea was compared with measured osmolality in preweaned Holstein calves. When calves (n = 5) were fed only milk replacer after fasting for 24 h, measured osmolality fluctuated almost in parallel with estimated osmolality during the 8-h period after feeding, although estimated values were about 90% of measured values. When calves (n = 5) were fed only calf starter after fasting for more than 16 h, measured osmolality did not parallel the estimated osmolality during the 8-h period after feeding. Some factors depressed measured osmolality in the first 2 h.     

Modifying ability of Ql-free coal-tar pitch to develop optical anisotropy in co-carbonizations

Carbonization properties of a Ql-free coal-tar pitch (CTP-ASM) prepared by selective precipitation were studied to evaluate it as a source for needle-coke. Its modifying ability for production of needlecoke in co-carbonizations with principal carbonizing substances which gave cokes of mozaic texture in single carbonizations was estimated by changing mixing ratios. The shape and size of the anisotropic optical texture in the co-carbonized coke were measured by point counting. CTP-ASM and Ashland A240, of eight additives, had the highest modifying ability in the co-carbonizations with Khafji vacuum residue. Both contained ca. 6% benzene-insolubles (Bl), and had f_a values of ≈0.9. Other additives of either lower or higher Bl or f_a showed less modifying ability. The modifying susceptibility of principal carbonizing substances varies with their structure and properties. Based on a systematic investigation of co-carbonizations the compatibility between a principal carbonizing substance and an additive is discussed from a viewpoint of their structural parameters.     

Stereocomplex crystallization and spherulite growth behavior of poly(l-lactide)-b-poly(d-lactide) stereodiblock copolymers

The non-isothermally and isothermally crystallized stereodiblock copolymers of poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) with equimolar l-lactyl and d-lactyl units and different number-average molecular weights (M_n) of 3.9 × 10³, 9.3 × 10³, and 1.1 × 10⁴ g mol⁻¹, which are abbreviated as PLLA-b-PDLA copolymers, contained only stereocomplex crystallites as crystalline species, causing higher melting temperatures of the PLLA-b-PDLA copolymers compared to those of PLLA homopolymers. In the case of non-isothermal crystallization, the cold crystallization temperatures of the PLLA-b-PDLA copolymers during heating and cooling were respectively lower and higher than those of PLLA homopolymers, indicating accelerated crystallization of PLLA-b-PDLA copolymers. In the case of isothermal crystallization, in the crystallizable temperature range, the crystallinity (X_c) values of the PLLA-b-PDLA copolymers were lower than those of the PLLA homopolymers, and were susceptible to the effect of crystallization temperature in contrast to that of homopolymers. The radial growth rate of the spherulites (G) of the PLLA-b-PDLA copolymers was the highest at the middle M_n of 9.3 × 10³ g mol⁻¹. This trend is different from that of the PLLA homopolymers where the G values increased monotonically with a decrease in M_n, but seems to be caused by the upper critical M_n values of PLLA and PDLA chains as in the case of PLLA/PDLA blends (in other papers), above which homo-crystallites are formed in addition to stereocomplex crystallites. The disturbed crystallization of PLLA-b-PDLA copolymers compared to that of the PLLA/PDLA blend is attributable to the segmental connection between the PLLA and PDLA chains, which interrupted the free movement of those chains of the PLLA-b-PDLA copolymers during crystallization. The crystallite growth mechanism of the PLLA-b-PDLA copolymers was different from that of the PLLA/PDLA blend.     

Detail analysis of fusion neutronics benchmark experiment for iron

In order to specify the best nuclear data on iron, the fusion neutronics benchmark experiment on iron at Japan Atomic Energy Agency (JAEA)/Fusion Neutronics Source (FNS) was analyzed in detail with MCNP-4C and the latest nuclear data libraries, JENDL-3.3, FENDL-2.1, JEFF-3.1 and ENDF/B-VII.0. As a result, totally the calculation result with ENDF/B-VII.0 agreed with the measurement best, except that it underestimated the measured neutron flux above 10 MeV with the depth. It was noted that the calculation result with JENDL-3.3 overestimated the measured neutrons below a few keV. Through the DORT calculations based on the iron data in ENDF/B-VII.0, it was found out that the first inelastic scattering cross-section data of ⁵⁷Fe in JENDL-3.3 caused the overestimation.     

Pd20Pt20Cu20Ni20P20 high-entropy alloy as a bulk metallic glass in the centimeter

A Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ bulk metallic glass (BMG) with a high-entropy (HE) alloy composition and a maximum diameter of 10 mm was fabricated by fluxed water quenching. The system and composition of the Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ alloy were determined from a prototype ternary Pd₄₀Ni₄₀P₂₀ BMG in accordance with two strategic alloy designs of (1) HE alloy defined by an equi-atomic alloy with five or more elements and (2) exchangeability of the constituent elements with a similar chemical nature in the periodic table. Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ HE-BMG had a supercooled liquid range of 65 K and a reduced glass transition temperature of 0.71. Successful formation of Pd₂₀Pt₂₀Cu₂₀Ni₂₀P₂₀ HE-BMG is significant to develop new alloys for HE alloys and BMGs.     

Fast incremental learning methods inspired by biological learning behavior

Model-based learning systems such as neural networks usually “forget” learned skills due to incremental learning of new instances. This is because the modification of a parameter interferes with old memories. Therefore, to avoid forgetting, incremental learning processes in these learning systems must include relearning of old instances. The relearning process, however, is time-consuming. We present two types of incremental learning method designed to achieve quick adaptation with low resources. One approach is to use a sleep phase to provide time for learning. The other one involves a “meta-learning module” that acquires learning skills through experience. The system carries out “reactive modification” of parameters not only to memorize new instances, but also to avoid forgetting old memories using a meta-learning module.This work was presented, in part, at the 9th International Symposium on Artificial Life and Robotics, Oita, Japan, January 28–30, 2004     

Highly reliable copper dual-damascene interconnects with self-formed MnSi/sub x/O/sub y/ barrier Layer

Copper (Cu) dual-damascene interconnects with a self-formed MnSi/sub x/O/sub y/ barrier layer were successfully fabricated. Transmission electron microscopy shows that approximately 2-nm thick and continuous MnSi/sub x/O/sub y/ layer was formed at the interface of Cu and dielectric SiO/sub 2/, and that no barrier was formed at the via bottom because no oxygen was at the via bottom during annealing. No leakage-current increase was observed, and electron energy loss analysis shows that no Cu was in SiO/sub 2/, suggesting that MnSi/sub x/O/sub y/ layer has sufficient barrier properties for Cu, and that the concept of self-forming barrier process works in Cu dual-damascene interconnects. Via chain yield of more than 90% and 50% reduction in via resistance were obtained as compared with physical vapor deposited tantalum barrier, because there is no barrier at the via bottom. In addition, no failure in the stress-induced voiding measurement was found even after a 1600-h testing. No failure in electromigration (EM) testing was found, as the electron flow is from the lower level interconnects through via up to upper level interconnects even after 1000-h testing. At least, four times EM lifetime improvement was obtained in the case of electron flow from upper level interconnect through via down to lower level interconnects. Significant EM lifetime improvement is due to no flux divergence site at the via bottom, resulting from there being no bottom barrier at the via.     

Design of a spotsize-converter-integrated laser diode (SS-LD) witha lateral taper, thin-film core and ridge in the 1.3-μm-wavelengthregion based on the 3-D BPM

In order to develop spotsize-converter-integrated laser diodes (SS-LDs) with high efficiency and large-misalignment tolerances in the 13-μm-wavelength region, spotsize converters (SSCs), which consist of lateral taper, thin-film core and ridge, are investigated employing the three-dimensional (3-D) semivectorial finite-difference beam propagation method (FD-BPM) with nonequidistant discretization. The sum of the spot-conversion loss and coupling loss between the laser diode (LD) eigenmode and the single-mode fiber (SMF) eigenmode are calculated for various structural parameters. Small loss of around 1.5 dB can be achieved by introducing a nonlinear taper. The fabrication tolerances for the SSCs are also clarified. The calculated results agree well with the results for actually fabricated SS-LD's. It is also shown that the radiation loss and coupling characteristics of the SS-LDs with a buried thin-film core structure can be improved using a nonlinear taper