An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

Current control of a PWM power amplifier by an approximate 2-degree-of-freedom digital controller

There is a need for robust current control of a pulse width modulation (PWM) power amplifier whose transient response characteristics do not deteriorate with extensive load changes and/or direct-current power supply voltage changes. In this article, we propose a digital robust controller with bumpless mode switching to control the current of a PWM power amplifier to satisfy the demands and extend the range of an inductive load width. It is necessary to measure the value of the load in order to implement this bumpless mode switching automatically depending on the load range. Therefore, a method of estimating the inductive load is shown. The bumpless mode switching is automatically performed by estimating an inductive value without specifying the value of the inductive load beforehand. That is, the value of the inductive load is estimated during the DDC execution, and the control mode is automatically switched bumplessly according to this estimated value. A digital controller equipped with inductance estimation and bumpless mode switching is realized by a DSP. Some experiments show that the digital controller with the proposed bumpless mode switching can satisfy larger specifications.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Engineering Transition Metal Layers for Long Lasting Anionic Redox in Layered Sodium Manganese Oxide

Oxygen-redox-based-layered cathode materials are of great importance in realizing high-energy-density sodium-ion batteries (SIBs) that can satisfy the demands of next-generation energy storage technologies. However, Mn-based-layered materials (P2-type Na-poor Na_y[A_xMn_1−x]O₂, where A = alkali ions) still suffer from poor reversibility during oxygen-redox reactions and low conductivity. In this work, the dual Li and Co replacement is investigated in P2-type-layered Na_xMnO₂. Experimentally and theoretically, it is demonstrated that the efficacy of the dual Li and Co replacement in Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂ is that it improves the structural and cycling stability despite the reversible Li migration from the transition metal layer during de-/sodiation. Operando X-ray diffraction and ex situ neutron diffraction analysis prove that the material maintains a P2-type structure during the entire range of Na⁺ extraction and insertion with a small volume change of ≈4.3%. In Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂, the reversible electrochemical activity of Co³⁺/Co⁴⁺, Mn³⁺/Mn⁴⁺, and O^2-/(O₂)^n- redox is identified as a reliable mechanism for the remarkable stable electrochemical performance. From a broader perspective, this study highlights a possible design roadmap for developing cathode materials with optimized cationic and anionic activities and excellent structural stabilities for SIBs.     

Prediction of color changes in acetaminophen solution using the time–temperature superposition principle

A prediction method for color changes based on the time–temperature superposition principle (TTSP) was developed for acetaminophen solution. Color changes of acetaminophen solution are caused by the degradation of acetaminophen, such as hydrolysis and oxidation. In principle, the TTSP can be applied to only thermal aging. Therefore, the impact of oxidation on the color changes of acetaminophen solution was verified. The results of our experiment suggested that the oxidation products enhanced the color changes in acetaminophen solution. Next, the color changes of acetaminophen solution samples of the same head space volume after accelerated aging at various temperatures were investigated using the Commission Internationale de l’Eclairage (CIE) LAB color space (a*, b*, L* and ΔE*ab), following which the TTSP was adopted to kinetic analysis of the color changes. The apparent activation energies using the time–temperature shift factor of a*, b*, L* and ΔE*ab were calculated as 72.4, 69.2, 72.3 and 70.9 (kJ/mol), respectively, which are similar to the values for acetaminophen hydrolysis reported in the literature. The predicted values of a*, b*, L* and ΔE*ab at 40?°C were obtained by calculation using Arrhenius plots. A comparison between the experimental and predicted values for each color parameter revealed sufficiently high R² values (>0.98), suggesting the high reliability of the prediction. The kinetic analysis using TTSP was successfully applied to predicting the color changes under the controlled oxygen amount at any temperature and for any length of time.     

Fabrication of large-volume microfluidic chamber embedded in glass using three-dimensional femtosecond laser micromachining

We report on fabrication of large-volume, square-shaped microfluidic chamber embedded in glass by scanning a tightly focused femtosecond laser beam inside a porous glass immersed in water. After the hollow structure is created in the porous glass substrate, the fabricated glass sample is post-annealed at 1,050°C during which it can be sintered into a compact glass. By the use of this technique, a 1 mm × 1 mm × 100 μm microchamber connected to four microfluidic channels is created inside the transparent glass substrate, showing that our technique allows for fabrication of not only thin channel structures with arbitrary lengths and configurations, but also hollow structures with infinitely large sizes.     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.     

Level-of-Detail Rendering of Large-Scale Irregular Volume Datasets Using Particles

This paper describes a level-of-detail rendering technique for large-scale irregular volume datasets. It is well known that the memory bandwidth consumed by visibility sorting becomes the limiting factor when carrying out volume rendering of such datasets. To develop a sorting-free volume rendering technique, we previously proposed a particle-based technique that generates opaque and emissive particles using a density function constant within an irregular volume cell and projects the particles onto an image plane with sub-pixels. When the density function changes significantly in an irregular volume cell, the cell boundary may become prominent, which can cause blocky noise. When the number of the sub-pixels increases, the required frame buffer tends to be large. To solve this problem, this work proposes a new particle-based volume rendering which generates particles using metropolis sampling and renders the particles using the ensemble average. To confirm the effectiveness of this method, we applied our proposed technique to several irregular volume datasets, with the result that the ensemble average outperforms the sub-pixel average in computational complexity and memory usage. In addition, the ensemble average technique allowed us to implement a level of detail in the interactive rendering of a 71-million-cell hexahedral volume dataset and a 26-million-cell quadratic tetrahedral volume dataset.     

Multi agent architecture for dynamic incremental process planning in the flexible manufacturing system

Due to rapid changes of markets and pressures of competitions, industries are adopting their production ways to support diversity of customer’s needs and increase of new product developments. This paper deals with development of an agent-based architecture of dynamic systems for process planning in the manufacturing systems. In consideration of alternative manufacturing processes and machine tools, the process plans and the schedules of the manufacturing resources are generated incrementally and dynamically. A previously proposed negotiation protocol is customized and improved to generate suitable process plans for the target products real-timely and dynamically, based on the alternative manufacturing processes. The alternative manufacturing processes are presented by the process plan networks and the suitable process plans are searched and generated to cope with both the dynamic status and disturbances of the manufacturing systems. We initiatively combine the heuristic search algorithms of the process plan networks with the negotiation protocols, in order to generate suitable process plans.