Comparison of pool boiling CHF of a polished copper block and carbon steel block on a declined slope

This study conducts a critical heat flux (CHF) experiment on a carbon steel block, and the block is positioned on slope that is declined at angles of 5° and 10°. The results of the carbon steel block experiment were then analyzed and compared with the results obtained from a copper block experiment that had been conducted previously at the same test facility. The comparison showed that several different types of phenomena had occurred, and the carbon steel block CHF at both 5° and 10° was much lower than that of the copper block. Detailed images of the heating surface of each material were acquired by a high-speed camera under different heat fluxes and analyzed. The carbon steel block surface generates more bubbles compared to the copper block under the same heat flux, which indicates that the carbon steel block should have a large number of nucleation sites. This causes a higher CHF. Finally, several existing theories on CHF mechanisms were also analyzed in an attempt to explain the difference of copper and carbon steel. It seemed that the contact angle alone was not sufficient to explain the large CHF decrease in the carbon steel block.     

FI Catalysts for Olefin Oligomerization and Polymerization: Production of Useful Olefin-Based Materials by Unique Catalysis

This contribution highlights the uniqueness of FI catalysts (phenoxy-imine ligated group 4 metal complexes) for olefin coordination insertion catalysis. FI catalysts possess characteristic structural and electronic features that are different from those of group 4 metallocene catalysts. These special features in turn initiate versatile catalytic properties that result in useful olefin-based materials some of which have already been commercialized.     

In situ TEM study on changes in structure and electrical conductance of carbon nanotube-gold contact induced by local joule heating

Electrical conductance of multi-walled carbon nanotubes (MWCNTs) with closed and open tips contacting with a gold (Au) electrode was studied by in situ transmission electron microscopy. When a current density through the contact region reached a threshold value of 2.6 × 10⁸ A/cm², the MWCNT tip was embedded into the Au surface by local melting of Au, and the total resistance was reduced with the increase of the contact area. Conductance per unit area at the contact between the MWCNT and Au electrode for the open-ended MWCNT is four times larger than that for the close-ended one, which is due to the direct connection of inner walls of the open-ended MWCNT with the Au surface.     

Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.     

A greedy reduced basis scheme for multifrequency solution of structural acoustic systems

The solution of frequency dependent linear systems arising from the discretization of vibro-acoustic problems requires a significant computational effort in the case of rapidly varying responses. In this paper, we review the use of a greedy reduced basis scheme for the efficient solution in a frequency range. The reduced basis is spanned by responses of the system at certain frequencies that are chosen iteratively based on the response that is currently worst approximated in each step. The approximations at intermediate frequencies as well as the a posteriori estimations of associated errors are computed using a least squares solver. The proposed scheme is applied to the solution of an interior acoustic problem with boundary element method (BEM) and to the solution of coupled structural acoustic problems with finite element method and BEM. The computational times are compared to those of a conventional frequencywise strategy. The results illustrate the efficiency of the method.     

Structural,mechanical, and electrical properties of carbon nanoparticles synthesized from diesel

We studied the elemental analysis, structural morphology, mechanical, and electrical properties of carbon nanoparticles synthesized from diesel. The spherical carbon particle size in the range of about 10 to 80 nm in diameter was observed in scanning electron microscope (SEM) studies that were identified by Atomic force microscopy (AFM) study as an aggregation of carbon particles of average size 2.5 nm. The surface rms of carbon nanoparticle thin film (CNTF) was measured directly by AFM and found 0.22 nm. The Derjaguin–Muller–Toporov (DMT) elastic modulus of carbon nanoparticles (CNPs) was measured by PeakForce QNM mode of AFM. The minimum and maximum elastic modulus was measured of 0.40 GPa and 43.89 GPa, respectively. The resistivity, conductivity, magneto resistance, mobility, and average Hall co-efficient were measured by “Ecopia Hall-effect measurement system” by four-point Van der Pauw approach at ambient condition. We demonstrated I–V characteristic at the Indium/CNTF thin film interface, which is accompanied by rectifying behavior.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Trend Curve Optimal Control Model for Optimizing Pavement Maintenance Strategies Consisting of Various Treatments

Abstract: Most literature on pavement maintenance optimization for the case of continuous time assumes only one type of maintenance treatment, such as overlay, to be applicable and demonstrates solution procedures with simple cases of limited scopes. However, as overlays may not always be appropriate, depending on traffic loading/pavement situations, the objective of this article is to propose an optimization approach based on the trend curve optimal control model, to obtain optimal strategies possibly consisting of overlay, resealing, and reconstruction. The applicability of the solution procedure is demonstrated with several cases representing a variety of traffic loading/pavement situations. The solutions indicate that an optimal maintenance strategy can consist of multiple types of treatments depending on the situation, illustrating the versatility of the proposed procedure.