A fast and compact elimination method of empty elements from a double‐array structure

A double‐array is a well‐known data structure to implement the trie. However, the space efficiency of the double‐array degrades with the number of key deletions because the double‐array keeps empty elements produced by the key deletion. This paper presents a fast and compact elimination method of empty elements using properties of the trie nodes that have no siblings. The present elimination method is implemented by C language. From simulation results for large sets of keys, the present elimination method is about 30–330 times faster than the conventional elimination method and maintains high space efficiency. Copyright © 2003 John Wiley & Sons, Ltd.     

Sensor Fusion System Using Recurrent Fuzzy Inference

In robotic and manufacturing systems, it is difficult to measure the state of systems accurately because of many uncertain factors and noise, and it is very important to estimate the state of systems. We must measure the phenomena of systems by multiple sensors and estimate the state of systems by acquiring information of sensors. However, we can not acquire all of sensor information synchronically, because each sensor has particular sensor information and measuring time. For estimating the state of systems by multiple sensors, a multi-sensor fusion system fusing various sensory information is needed. In this paper, we propose a Recurrent Fuzzy Inference (RFI) with recurrent inputs and apply it to a multi-sensor fusion system for estimating the state of systems. The membership functions of RFI are expressed by Radial Basis Function (RBF) with insensitive ranges. The shape of the membership functions can be adjusted by a learning algorithm. The learning algorithm is based on the steepest descent method and incremental learning which can add new fuzzy rules. The effectiveness of the multi-sensor fusion system using RFI will be shown through a numerical experiment of moving robot and estimation of surface roughness in grinding process.     

Current dependence of performance of TES microcalorimeters and characteristics of excess noise

We are developing transition edge sensor (TES) microcalorimeter arrays for future Japanese astronomy missions. Although 6.6 eV energy resolution for 5.9 keV and 74 μs decay time are achieved, our energy resolution was limited by the excess noise of unknown origin. The dominant noise showed 1/R dependence and it only appeared when the current through the TES, I, is larger than 10 μA. This is explained if we assume a constant voltage noise source with a level of 2(4kT_CR_n)^1/2. We also investigated the influence of I on the TES performance and found the TES sensitivity is reduced when the ratio of current to the critical current I/I_C is large. It can explain the reduction of observed when operated without a magnetic shield. We also found a strong correlation between I_C and or the baseline width. Thus, we conclude that I_C is an essential parameter for the TES performance.     

Suppression of active-oxidation of Si-C fibers (Hi-Nicalon) under reduced pressure by carbon or silica coating

The suppression of the active-oxidation of Si-C fibers (Hi-Nicalon) by carbon or silica coating were investigated at 1773 K under a reduced pressure of 1.32 Pa, through mass change determination, XRD analysis, resistivity measurement, SEM observation and tensile test. The coating of carbon and silica were conducted by heat-treating at 1773 K in CO-CO₂ gas mixtures. After exposure under a reduced pressure, the carbon coating formed in pure CO gas remained almost perfect and the retained strength of 1.7 GPa was nearly identical to that in the as-heat treated state. On the other hand, the carbon coatings formed under other conditions and all the silica coatings were completely lost during vacuum exposure. The retained strengths were in the range of 0 to 1.6 GPa. The silica film was found to be ineffective for suppressing the active-oxidation during vacuum exposure.     

Change of fuel-to-cladding gap width with the burn-up in FBR MOX fuel irradiated to high burn-up

In order to study the dependence of the gap width change on the burn-up, the fuel-to-cladding gap widths were investigated by ceramography in a large number of FBR MOX fuel pins irradiated to high burn-up. The dependence of gap widths on the burn-up was closely connected with the formations of JOG (joint oxyde-gaine) and rim structure. The gap widths decreased gradually due to the fuel swelling until ∼30 GWd/t, but beyond this burn-up the dependence showed two different tendencies. With the increase of burn-up, the gap widths decreased due to the increase of fuel swelling in the low fuel temperature region where the rim structure was observed, but they increased in the high fuel temperature region where the JOG rich in Cs and Mo formed in the gap.     

Layout and results from the initial operation of the high-resolution x-ray imaging crystal spectrometer on the Large Helical Device

First results of ion and electron temperature profile measurements from the x-ray imaging crystal spectrometer (XICS) diagnostic on the Large Helical Device (LHD) are presented. This diagnostic system has been operational since the beginning of the 2011 LHD experimental campaign and is the first application of the XICS diagnostic technique to helical plasma geometry. The XICS diagnostic provides measurements of ion and electron temperature profiles in LHD with a spatial resolution of 2 cm and a maximum time resolution of 5 ms (typically 20 ms). Ion temperature profiles from the XICS diagnostic are possible under conditions where charge exchange recombination spectroscopy (CXRS) is not possible (high density) or is perturbative to the plasma (low density or radio frequency heated plasmas). Measurements are made by using a spherically bent crystal to provide a spectrally resolved 1D image of the plasma from line integrated emission of helium-like Ar(16 +). The final hardware design and configuration are detailed along with the calibration procedures. Line-integrated ion and electron temperature measurements are presented, and the measurement accuracy is discussed. Finally central temperature measurements from the XICS system are compared to measurements from the Thomson scattering and CXRS systems, showing excellent agreement.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.