Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3

The respective influences of calcination, drying methods, and washing conditions on the morphologies, surface properties, and photocatalytic activities of TiO₂ powders prepared from acid treatments of BaTiO₃ were investigated. Rutile powder was obtained using the treatment under strong acid conditions. It possesses a bundle-like shape and comprises rutile nanorods. After calcination, characteristic voids were observed in the particles. Anatase powder was obtained by adjusting pH values of a BaTiO₃ suspension to 2.5-3. Drying at 110 °C engendered the formation of spheroidal anatase, although freeze-dried anatase particles assembled into a flake-like shape. The freeze-dried samples show lower crystallinity. With grafting Cu ions, rutile exhibited better photocatalytic performance for the decomposition of gaseous 2-propanol (IPA) under visible light, although it did not work effectively for anatase.     

Surface Waves on Superfluid <Superscript>4</Superscript>He Under Reduced Gravity

Superfluid ⁴He was produced on a small jet plane for the first time using a small GM-refrigerator to condense the liquid and a scroll pump to get the superfluid by evaporation. The surface wave on superfluid under 0.5g _E, 0.1g _E and 0.05g _E, together with 2g _E and 1g _E, was successfully examined by an optical method utilizing parabolic flight. Here, g _E is the gravitational constant on the ground. Assuming that only the fundamental mode was excited as determined by the sample cell width, the resonance peak in the frequency domain was well reproduced by the gravity wave with corresponding gravity constant.     

Electric double‐layer capacitor module with series‐parallel reconfigurable cell voltage equalizers

When electric double‐layer capacitors (EDLCs) are connected in series, a cell voltage imbalance occurs due to nonuniform cell properties. Cell voltage imbalance should be minimized to prolong cycle lives and maximize the available energy of cells. In this study, we propose a series‐parallel reconfigurable cell voltage equalizer that is considered suitable for energy storage systems using EDLCs instead of traditional secondary batteries as the main energy storage sources. The proposed equalizer requires only EDLCs and switches as its main circuit elements, and it utilizes EDLCs not only for energy storage but also for equalization. An equivalent circuit model using equivalent resistors that can be regarded as an index of equalization speed is developed. Current distribution and cell voltage imbalancing during operation are quantitatively generalized. Experimental charge–discharge tests were performed on the EDLC modules to demonstrate the performance of the cell voltage equalizer. All the cells in the modules could be charged/discharged uniformly even when a degradation‐mimicking cell was intentionally included in the module. The resultant cell voltage imbalances and current distributions were in good agreement with those predicted by mathematical analyses. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 181(4): 38–50, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.21287     

Active device‐less voltage equalization charger using capacitors,diodes, and an AC power source

Conventional cell/module voltage equalizers or equalization chargers based on traditional DC‐DC converters require numerous switches or transformers as the number of series connections increases; therefore, their cost and complexity tend to increase and their reliability decreases as the number of connections increases. This paper proposes a novel voltage equalization charger that consists only of passive components such as capacitors, diodes, and a transformer. The fundamental operating principle, major features, and derivation of equivalent DC circuits are presented. A symmetrical configuration is also proposed to mitigate the RMS current flowing through energy storage cells in the charging process. Simulations and experimental charging and cycle tests were performed on series‐connected electric double‐layer capacitor modules to demonstrate the equalization performance. The experimental and simulation results were in good agreement, and the voltage imbalances were gradually eliminated as time elapsed even during charge‐discharge cycling. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 181(3): 39‐48, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21288     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

A spreadsheet-based fuzzy retrieval system

Under the downsizing boom and cost decrease in computer-related industries, both business and individual computer users have been greatly influenced. For instance, the users will come up against the chance to handle imprecise data in real life with their computers more than ever. Therefore, solutions for easily developing fuzzy systems are strongly needed. In response to this need, many studies have been done in the fuzzy database area because fuzzy retrieval is one of the suitable ways to deal with those kind of data. In this article, the development of a fuzzy retrieval system which can be used on a personal computer is described, especially from an industrial point of view. Additionally, the effects of fuzzy retrieval are proposed and its thinkable applications are introduced. © 1996 John Wiley & Sons, Inc.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Dynamic mechanical analysis of thermoplastic composites and resins

The anisotropy of continuous fiber thermoplastic composites limits the number of geometries that can be employed effectively in dynamic mechanical analysis (DMA). Therefore, a Mechanical Energy Resolver, developed for use with elastomers, was modified with a bending fixture using a cantilever beam sample geometry and a high temperature oven. The bending fixture allows determination of composite transition temperatures. Based upon the simple geometry, one can also determine elastic moduli. This test scheme can be coupled with simple shear DMA on melts to determine neat resin properties, including solidification temperature. Results are presented for several semicrystalline and armorphous thermoplastic/graphite fiber laminates and neat resins.