智能网与Internet互通的模型与实现

介绍了智能网（IN）与In-ternet互通（PINT）的系统原理，以及PINT和SPIRITS等两类互通业务的网络结构，给出了智能网与Inter-net互通的模型。讨论了智能网与In-ternet互通的实现，并给出了一个PINT业务实例-点击拨号业务。     

Macrophage Migration Inhibitory Factor (MIF) as a Stress Molecule in Renal Inflammation

Renal inflammation is an initial pathological process during progressive renal injury regardless of the initial cause. Macrophage migration inhibitory factor (MIF) is a truly proinflammatory stress mediator that is highly expressed in a variety of both inflammatory cells and intrinsic kidney cells. MIF is released from the diseased kidney immediately upon stimulation to trigger renal inflammation by activating macrophages and T cells, and promoting the production of proinflammatory cytokines, chemokines, and stress molecules via signaling pathways involving the CD74/CD44 and chemokine receptors CXCR2, CXCR4, and CXCR7 signaling. In addition, MIF can function as a stress molecule to counter-regulate the immunosuppressive effect of glucocorticoid in renal inflammation. Given the critical position of MIF in the upstream inflammatory cascade, this review focuses on the regulatory role and molecular mechanisms of MIF in kidney diseases. The therapeutic potential of targeting MIF signaling to treat kidney diseases is also discussed.     

珠海发电厂电动给水泵电动机保护动作分析

珠海发电厂1号机1号电动给水泵启动中综合保护继电器保护动作,跳开电动给水泵电源开关,马达端盖出风口有青黑色烟气冒出.根据综合保护继电器记录数据,利用矢量分析法,结合继电保护及电力系统稳态、暂态理论知识,在最短时间内分析出电动机发生了B相绕组匝间短路,为确定电动机故障点提供了理论支持,确保了故障电动机的及时维修,并在电动给水泵进行解体后,验证了理论分析的正确性.     

NiCuZn ferrite flakes prepared using a sol-gel bubble method and its magnetic properties

Ni_0.23Cu_0.11Zn_0.66Fe₂O₄ ferrite flakes, with thickness of about 8 μm and average diameter of 20-35 μm, were prepared using a sol-gel bubble method. Morphology, phase evolution, static and dynamic magnetic properties of the flakes and their composites were studied. Magnetic measurements showed that easy magnetization direction of the flaky filler composite was parallel to its sample plane. Composites made of silicone resins and flakes had higher complex permeability, which can be attributed to the reduction in demagnetization factor due to their flaky shapes. This sol-gel bubble method should be also applicable to fabricating flakes of other multi-component oxides.     

An innovative method to perform maskless plain waterjet milling for pocket generation: a case study in Ti-based superalloys

This paper presents an innovative methodology/jet path on which plain waterjet (PWJ) can generate pockets of good dimensional/geometrical definition (minimised under/over-erosion) while the proposed method leads to the avoidance of grit embedment on the target workpiece and the elimination of extra cost and time related to the use of mask.The novelty of the paper relies on the proposal of jet-path strategy that minimises the variations in jet dwell time by providing “continuous” relative movement during the jet-part interaction (through minimisation of accelerations/decelerations of the machine head) and by removing a controlled amount of material in a series of layers using special techniques. The proposed method is powerful in its approach from which it ensures (quasi)equal exposure time for each zone of material over which the jet passes, so that the jet path is “totally contained” within the form to be generated; hence, no masking is necessary to define the contour/shape.This approach has been employed for generating pockets on two Ti-based superalloys commonly used in aerospace industries, followed by dimensional, geometrical and surface quality analysis. The results proved that this approach can produce milled surfaces of straightness of the pocket bottom (<200 μm), tolerance on depth of cut per layer (<20 μm), tolerance on the radii at the bottom of the pockets (<100 μm), surface roughness (Ra=4–14 μm) and waviness (Wa=10–13 μm) characteristics in conditions of high surface integrity (no cracks, contaminations, etc.).     

On-line acoustic viscometry in oil condition monitoring

The paper describes the theoretical standpoints of developing magnetoelastic viscometers and a concept of viscosity measurement. The magnetoelastic viscometer has shown the readings close to the capillary viscometer. Testing of the oils with PMMA viscosity-index improvers by viscometers has indicated changes in rheological properties observed in the non-Newtonian behavior of the oils. With increase in content or molecular weight of the improver, the non-Newtonian behavior of the oil appeared at lower frequencies of viscosity measurements.     

Calculated Sound Velocity and Elastic Moduli Changes in LaOFeP and LiFeAs at the Superconducting Transition

The changes in elastic modulus and sound velocity of LaOFeP and LiFeAs at their transition temperatures were calculated using various thermodynamic data. Step discontinuities of 59 ppm in the bulk modulus, 101 ppm in Young modulus and 15 ppm in longitudinal sound velocity were estimated for LaOFeP at the superconducting transition. For LiFeAs, the calculated step discontinuities were 25 ppm in the bulk modulus, 38 ppm in Young modulus and 7 ppm in longitudinal sound velocity.     

Tooth flank modification theory of dual-torus double-enveloping hourglass worm drives

In this paper, the theory of tooth flank modification is enriched and developed for a double-enveloping toroidal worm drive. The goal and significance of the modification are expounded from the point of view of changing the tooth flank configuration for the worm gear pair. It is pointed out that the constant center distance modification, the constant transmission ratio modification, and the combination of the previous two are the convenient and reasonable modification strategies. All the corrected hourglass worm pairs, attained by employing the preceding modification methodology, can be divided into two fundamental types: the type I worm pair and the type II worm pair, from the perspective of the meshing behavior. The division criterion of the worm drive type is moreover provided on the basis of the value range of the modification parameters in this study. The meshing characteristics of the two types of the modified globoidal worm drive are summarized in detail. The results indicate that the type II worm gearing with slight modification should be the preferred style for the double-enveloping toroidal worm drive.