On-line coupled liquid chromatography-gas chromatography (LC-GC) and LC-LC-GC for detecting irradiation of fat-containing foods

Summary On-line coupled liquid chromatography-gas chromatography-flame ionisation detection (LC-GC-FID) enables efficient and unambiguous determination of irradiation for some fat-containing foods (e.g. meat). Other products, however, contain interfering components or are contaminated, e.g., with mineral oil. Since more selective detection by mass spectrometry has limited success, the determination was improved by a more selective isolation of some key components among the fat degradation products, e.g. the dienes or trienes, by LC-LC-GC-FID. Applications are shown for soup mixes, some spices, fish, and shrimps.

---

Nachweis der Bestrahlung fetthaltiger Lebensmittel durch direkt gekoppelte LC-GC und LC-LC-GC

Zusammenfassung Die Bestrahlung einiger fetthaltiger Lebensmittel, z. B. Fleisch, kann mit direkt gekoppelter LC-GC-FID rationell und eindeutig nachgewiesen werden. In anderen Proben wird die Analyse aber durch Inhaltsstoffe des Produktes oder durch Verunreinigungen (z. B. mit Mineralöl) gestört. Da selektivere Detektion durch Massenspektrqmetrie wenig verspricht, wurde der Nachweis durch selektivere Isolierung von Schlüsselkomponenten unter den Bestrahlungsprodukten, z. B. der Diene oder Triene, mittels LC-LC-GC yerbessert. Anwendungen werden gezeigt für Suppenpulver, einige Gewürze, Fisch und Garnelen.

     

Measurements of OVOCs and NMHCs in a Swiss highway tunnel for estimation of road transport emissions

Eighteen oxygenated volatile organic compounds (OVOCs) and eight nonmethane hydrocarbons (NMHCs) were measured continuously during a two-week campaign in 2004 in the Gubrist highway tunnel (Switzerland). The study aimed to estimate selected OVOC and NMHC emissions of the current vehicle fleet under highway conditions. For the measured OVOCs the highest EFs were found for ethanol (9.7 mg/km), isopropanol (3.2 mg/km), and acetaldehyde (2.5 mg/km), followed by acetone, benzaldehyde, and acrolein. Formaldehyde, the most abundant OVOC measured in other studies, was not measured by the method applied. Relative emissions of the measured OVOCs were estimated to contribute approximately 6 and 4% to the total road traffic VOC emissions from Switzerland and Europe, respectively. Results are compared with those from previous studies from the same tunnel performed in 1993 and 2002, and from campaigns in other tunnels. A continuous reduction in the emission factors (EFs) was determined for all measured compounds from 1993 until 2004. The relative contributions of light-duty vehicles (LDV) and heavy-duty vehicles (HDV) to the total emissions indicated that OVOCs were mainly produced by the HDVs, whereas LDVs dominated the production of the NMHCs.     

Measures of overall persistence and the temporal remote state

The overall persistence, Pov, has been suggested as an indicator that integrates single media half-lives and phase partitioning. However, the application of this indicator is hindered by the fact that there are different definitions of Pov and that the most common measure of Pov, the residence time at steady state, depends heavily on the release pattern. Here, different measures are compared that can be used to compute Pov from the mass of a chemical in the environment as a function of time in a dynamic multimedia model. These measures include the equivalence width, which corresponds to the residence time at steady state, the mean value of the function of mass vs time ("mean time"), and the clearance time. The temporal remote state is defined as the state of the model system long after the stop of emissions; it is independent of the release pattern of a chemical. The mean time in the temporal remote state reflects the long-term removal rate of a chemical and is used as a persistence benchmark. Correlations of the three measures of Pov to the persistence benchmark are analyzed. The maximum equivalence width, which is obtained with release to one of the media air, water, or soil, is a good approximation of the mean time in the temporal remote state. Because the maximum equivalence width is identical to the maximum residence time at steady state, the mean time in the temporal remote state can be estimated with existing steady-state models.     

Organic pollutant removal versus toxicity reduction in industrial wastewater treatment: the example of wastewater from fluorescent whitening agent production

Industrial wastewater treatment in the chemical industry aims at eliminating organic contaminants, as these pollutants may be persistent and ecotoxic. In a case study performed in collaboration with the chemical industry, we investigated the removal of a fluorescent whitening agent and its side products in the wastewater-treatment system. Adsorption to activated carbon and biological treatment were simulated in laboratory tests. Algae toxicity tests were performed to quantify the toxicity of the wastewater mixture and of single components. The contaminants identified accounted for up to 82% of the wastewater's total organic carbon (TOC). Adsorption to activated carbon eliminated the TOC and the single contaminants only slightly. Nevertheless, the toxicity of the wastewater decreased by 40%. In contrast, biological treatment reduced the TOC by up to 80%, and the whole effluent toxicity increased. These results indicate that new ecotoxic metabolites were formed during the biological treatment. They also illustrate that mere reduction of the TOC in the wastewater-treatment system is not sufficient for ensuring a reduction of environmental impact. Therefore, simultaneously conducting TOC measurements and toxicity tests, as demonstrated in the current work, is recommended.     

Initial steps of the metal-catalysed degradation of L-dehydroascorbic acid in acidic aqueous solutions

The initial steps of the degradation of L-de- hydroascorbic acid (L-DHA) in acidic aqueous solutions and the catalytic effect of different transition metal ions on this reaction were studied. The main product was identified as 3,6-furanosido-2,3-hexodiulosonic acid-2-hydrate (compound I) by GLC-MS and ¹³C-NMR, formed by lactone hydrolysis and hydration of the carbonyl group in the C-2 position of L-dehydroascorbic acid. In addition, number of other compounds were detected; they are formed from compound I by simple enolisation, lactonisation, hydration and dehydration reactions as well as by cleavage and formation of cyclic half acetal bonds. The chemical structures of these compounds were tentatively deduced by the mass spectra of their TMS derivatives and a reaction scheme for their formation is proposed. The velocity and the direction of the reactions were found to be strongly influenced by the presence of catalytic amounts of different transition metal ions. It was concluded that in acidic medium, in contrast to the situation in neutral and alkaline solutions, the opening of the lactone ring of L-DHA is, to a certain degree, a reversible reaction.     

Methods used for the isolation, enumeration, characterisation and identification of Enterococcus spp. 2. Pheno- and genotypic criteria

This paper reviews the methodology applied for the identification and characterisation of enterococci and covers phenotypic, genotypic and phylogenetic techniques. Although conventional phenotypic typing schemes are useful for rapid and simple identification of enterococcal species for routine applications, other methods like standardised sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE), multilocus enzyme electrophoresis (MLEE), antimicrobial susceptibility testing, serotyping, pyrolysis mass spectrometry (pyMS) and vibrational spectroscopic methods allow a more in-depth characterisation of enterococci. Many of the recently described enterococcal species exhibit deviations from hitherto so-called classical enterococci with regard to their phenotypical properties. Therefore, genotypic methods have to be used to clarify their possible assignment to the genus Enterococcus. In this review, special emphasis is given on recently developed polymerase chain reaction (PCR)-based typing methods such as random amplified polymorphic DNA (RAPD), amplified fragment length polymorphism (AFLP), specific and random amplification (SARA) and modifications of PCR-ribotyping as well as pulsed-field gel electrophoresis (PFGE) and partial sequence analysis. The use of PCR and probes for genus and species identification of enterococci is also considered like the application of sequence data of conserved DNA regions (e.g., ribosomal ribonucleic acid (rRNA) genes) in the case of species identification.