Railgun performance with a two-stage light-gas gun injector

Results obtained with the HELEOS (hypervelocity experimental launcher for equation of state) railgun, which uses a two-stage light-gas gun (2SLGG) as an injector, are presented. The high-velocity 2SLGG injector preaccelerates projectiles up to ~7 km/s. The high injection velocity reduces the exposure duration of the railgun barrel to the passing high temperature plasma armature, thereby reducing the ablation and subsequent armature growth. The 2SLGG also provides a column of cool, high-pressure hydrogen gas to insulate the rails behind the projectile, thereby eliminating restrike. A means to form an armature behind the injected projectile has been developed. In preliminary tests, the third-stage railgun has successfully increased the projectile velocity by 1.35 km/s. Extensive diagnostics have been used to determine the behavior of the armature and track the launcher's performance. Insome cases, velocity increases in the railgun section have been achieved, which are in close agreement with theoretical predictions, whereas in other experiments deviations from theoretical have been observed. The reasons for and implications of these results are addressed. Recent tests are reported     

Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser

This paper presents the results of an investigation into the dressing and truing of hybrid bonded (metal-vitrified) CBN grinding wheels using a short-pulsed fibre laser. Truing of complex contours on CBN grinding tools with sharp edges (edge radii of less than 20 μm) could be successfully applied, whereas other dressing methods have been neither technically nor economically successful. Sharpening by laser can provide the same wheel surface topography which is conventionally produced by SiC and/or Al₂O₃ sharpening tools. Grinding characteristics and long-term performance of the laser-profiled tools are discussed.     

Anisotropic Filtering of Non-Linear Surface Features

A new method for noise removal of arbitrary surfaces meshes is presented which focuses on the preservation and sharpening of non‐linear geometric features such as curved surface regions and feature lines. Our method uses a prescribed mean curvature flow (PMC) for simplicial surfaces which is based on three new contributions: 1. the definition and efficient calculation of a discrete shape operator and principal curvature properties on simplicial surfaces that is fully consistent with the well‐known discrete mean curvature formula, 2. an anisotropic discrete mean curvature vector that combines the advantages of the mean curvature normal with the special anisotropic behaviour along feature lines of a surface, and 3. an anisotropic prescribed mean curvature flow which converges to surfaces with an estimated mean curvature distribution and with preserved non‐linear features. Additionally, the PMC flow prevents boundary shrinkage at constrained and free boundary segments.     

Light metal compound casting

‘Compound casting’simplifies joining processes by directly casting a metallic melt onto a solid metal substrate. A continuously metallurgic transition is very important for industrial applications, such as joint structures of spaceframe constructions in transport industry. In this project, ‘compound casting’ of light metals is investigated, aiming at weight-saving. The substrate used is a wrought aluminium alloy of type AA5xxx, containing magnesium as main alloying element. The melts are aluminium alloys, containing various alloying elements (Cu, Si, Zn), and magnesium. By replacing the natural oxygen layer with a zinc layer, the inherent wetting difficulties were avoided, and compounds with flawless interfaces were successfully produced (no contraction defects, cracks or oxides). Electron microscopy and EDX investigations as well as optical micrographs of the interfacial areas revealed their continu- ously metallic constitution. Diffusion of alloying elements leads to heat-treatable microstructures in the vicinity of the joining interfaces in Al-Al couples. This permits significant variability of mechanical properties. Without significantly cutting down on wettability, the formation of low-melting intermetallic phases (Al3Mg2 and Al12Mg17 IMPs) at the interface of Al-Mg couples was avoided by applying a protective coating to the substrate.     

Helenos: A realistic benchmark for distributed transactional memory

Transactional memory (TM) is an approach to concurrency control that aims to make writing parallel programs both effective and simple. The approach has been initially proposed for nondistributed multiprocessor systems, but it is gaining popularity in distributed systems to synchronize tasks at large scales. Efficiency and scalability are often the key issues in TM research; thus, performance benchmarks are an important part of it. However, while standard TM benchmarks like the Stanford Transactional Applications for Multi‐Processing suite and STMBench7 are available and widely accepted, they do not translate well into distributed systems. Hence, the set of benchmarks usable with distributed TM systems is very limited, and must be padded with microbenchmarks, whose simplicity and artificial nature often makes them uninformative or misleading. Therefore, this paper introduces Helenos, a realistic, complex, and comprehensive distributed TM benchmark based on the problem of the Facebook inbox, an application of the Cassandra distributed store.     

Comparison of satellite-derived and in-situ observations of ice and snow surface temperatures over Greenland

The most practical way to get spatially broad and continuous measurements of the surface temperature in the data-sparse cryosphere is by satellite remote sensing. The uncertainties in satellite-derived LSTs must be understood to develop internally-consistent decade-scale land surface temperature (LST) records needed for climate studies. In this work we assess satellite-derived “clear-sky” LST products from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), and LSTs derived from the Enhanced Thematic Mapper Plus (ETM+) over snow and ice on Greenland. When possible, we compare satellite-derived LSTs with in-situ air temperature observations from Greenland Climate Network (GC-Net) automatic weather stations (AWS). We find that MODIS, ASTER and ETM+ provide reliable and consistent LSTs under clear-sky conditions and relatively-flat terrain over snow and ice targets over a range of temperatures from ? 40 to 0 °C. The satellite-derived LSTs agree within a relative RMS uncertainty of ~ 0.5 °C. The good agreement among the LSTs derived from the various satellite instruments is especially notable since different spectral channels and different retrieval algorithms are used to calculate LST from the raw satellite data. The AWS record in-situ data at a “point” while the satellite instruments record data over an area varying in size from: 57 × 57 m (ETM+), 90 × 90 m (ASTER), or to 1 × 1 km (MODIS). Surface topography and other factors contribute to variability of LST within a pixel, thus the AWS measurements may not be representative of the LST of the pixel. Without more information on the local spatial patterns of LST, the AWS LST cannot be considered valid ground truth for the satellite measurements, with RMS uncertainty ~ 2 °C. Despite the relatively large AWS-derived uncertainty, we find LST data are characterized by high accuracy but have uncertain absolute precision.     

Recognition of Adulterated Oils by Direct Analysis of the Minor Components

Recognition of adulteration by other oils via direct analysis of the minor components (“sterol fraction”) is shown for olive oil. 10 % of various oils were admixed, the free alcohols silylated and the minor components analyzed by on-line coupled LC-GC-FID. For most oils, even smaller additions can be recognized. Admixed oils can no longer be determined, however, if their minor components have been removed by strong raffination. Bleaching of rapeseed oil with 7% of earth at 180 °C, in fact, completely removed free and esterified sterols.