Reliability assessment of the rotation algorithm for earthquake damage estimation

A rotation algorithm was developed that computes the slope of permanently deformed columns subjected to earthquake ground motion using micro-electro-mechanical system accelerometers. Previous studies by the authors have shown that the algorithm can provide estimates of the residual displacement in the column, and thus the story drift can be evaluated. The algorithm was validated through applications to columns that deflect in single and double curvature. Information from tests on such columns conducted at various laboratories was used to conduct the study. The optimal number of sensors and their placement on the test columns were determined through a series of numerical analyses. The accuracy of the rotation and displacement estimates is assessed under the assumptions of zero-noise sensors and perfect measurements. In this paper, the effect of measurement error and sensor noise on the predicted rotations and corresponding deformations is studied in order to provide bounds on the accuracy of the rotation algorithm and on the allowable sensor noise. The same test columns are used for the purposes of these analyses.     

Hydrolytic Depolymerization of PET in a Microwave Reactor

Recycling of PET was examined using hydrolytic depolymerization in an alkaline solution under microwave irradiation. The reaction was carried out in a sealed microwave reactor in which the pressure and temperature were controlled and recorded. The main products were the monomers TPA and EG. The effect of reaction temperature, time, amount of PET and alkaline concentration on the degree of PET depolymerization and TPA recovery was investigated. Microwave irradiation was found to reduce the time needed to achieve a specific degradation of PET significantly, with almost complete depolymerization occurring in 30 min at 180 °C and only 46 W of microwave power. Using a phase transfer catalyst (TOMAB) resulted in the same amount of unreacted PET but at significantly lower depolymerization temperatures.

     

Laser Melting of Spark Plasma-Sintered Zirconium Carbide: Thermophysical Properties of a Generation IV Very High-Temperature Reactor Material

Melting temperatures of zirconium carbide were investigated in validating a novel thermal analysis technique for refractory materials. Commercial ZrC_0.96 powder was densified by spark plasma sintering to >96% relative density after 6–30 min at 2173–2453 K under 40–100 MPa. Sintered ceramics were heated to >4000 K via pulsed laser heating. Mean values for solidus and liquidus transitions were 3451 and 3608 K, respectively, in fair agreement with the present phase diagram. Postmelting analysis revealed dendritic microstructure and composition consistent with single-phase ZrC. Subsurface gas porosity and ZrC–C eutectic indicate complex processes occurring during melting and freezing.     

Algorithmic Exploration and Implementation of a MIMO-OFDM Equalizer

In this paper we explore algorithms and architectures for the implementation of a MIMO OFDM Equalizer for high speed wireless communications. The algorithmic exploration is based on matrix computations and factorizations. A scalable computational methodology and architecture is proposed for the implementation of a 4×4 MIMO OFDM. A 2×3 Equalizer supporting Maximum Ratio Combining and Zero Forcing equalization for 20/40 MHz 64-QAM OFDM modulation has been implemented in 150 nm technology. The Equalizer area is 133k gates and the maximum throughput achieved is 480Mbits/s. The system described in this paper is compliant with the latest IEEE standard for MIMO wireless communications (802.11n)     

Lead contamination and associated disease in captive and reintroduced red kites Milvus milvus in England

Since 1989, a red kite Milvus milvus reintroduction programme has been underway in the United Kingdom, with 4-6 week old nestlings brought into captivity and held for 6-8 weeks before reintroduction. As scavengers, red kites may consume unretrieved game, and ingest shot or lead (Pb) fragments in their prey's flesh. We evaluated exposure to Pb in captive and wild red kites by taking blood samples from 125 captive young red kites prior to release, through analysing 264 pellets (regurgitated by wild birds) collected from under a roost site, and analysing Pb concentrations in livers and/or bones of 87 red kites found dead between 1995 and 2003. Lead isotope analyses of livers were also conducted in an effort to identify Pb exposure routes. Forty-six (36.8%) kites sampled prior to release had elevated blood Pb concentrations (201-3340 microg l(-1)). The source of this Pb was probably small fragments of lead ammunition in the carcasses of birds or mammals either fed to the nestlings by their parents or, more likely, subsequently whilst in captivity. Once released, kites were also exposed to lead shot in their food, and a minimum of 1.5-2.3% of regurgitated pellets contained Pb gunshot. Seven of 44 red kites found dead or that were captured sick and died within a few days had elevated (>6 mg kg(-1) dry weight [d.w.]) liver Pb concentrations, and six of these (14%) had concentrations of >15 mg kg(-1) d.w., compatible with fatal Pb poisoning. Post-mortem analyses indicated that two of these birds had died of other causes (poisoning by rodenticide and a banned agricultural pesticide); the remaining four (9%) probably died of Pb poisoning. Bone samples from 86 red kites showed a skewed distribution of Pb concentration, and 18 samples (21%) had Pb concentrations >20 mg kg(-1) d.w., indicating elevated exposure to Pb at some stage in the birds' life. Lead isotopic signatures (Pb (208/206); Pb (206/207)) in liver samples of the majority of kites were compatible with those found in lead shot extracted from regurgitated pellets. Lead isotope ratios found in the livers of kites with very low Pb concentrations were distinct from UK petrol Pb isotopic signatures, indicating that birds were exposed to little residual petrol Pb. We conclude that the primary source of Pb to which red kites are exposed is lead ammunition (shotgun pellets or rifle bullets), or fragments thereof, in their food sources; in some cases exposure appears sufficient to be fatal. We make recommendations to reduce Pb poisoning in both captive and wild red kites and other scavenging species.     

Reliability assessment of cutting tool life based on surrogate approximation methods

A novel reliability estimation approach to the cutting tools based on advanced approximation methods is proposed. Methods such as the stochastic response surface and surrogate modeling are tested, starting from a few sample points obtained through fundamental experiments and extending them to models able to estimate the tool wear as a function of the key process parameters. Subsequently, different reliability analysis methods are employed such as Monte Carlo simulations and first- and second-order reliability methods. In the present study, these reliability analysis methods are assessed for estimating the reliability of cutting tools. The results show that the proposed method is an efficient method for assessing the reliability of the cutting tool based on the minimum number of experimental results. Experimental verification for the case of high-speed turning confirms the findings of the present study for cutting tools under flank wear.     

Evaluation of the strain variability of Salmonella enterica acid and heat resistance

The inherent acid and heat resistances of 60 Salmonella enterica strains were assessed in tryptone soy broth without dextrose acidified to pH 3.0 or heated at 57 °C. A total of 360 inactivation curves were generated. Regarding the acid challenge experiments, the inactivation rate (k_acid), estimated using the log–linear model, ranged from 0.47 to 3.25 h⁻¹. A log–linear model with a “survival tail” was used to describe the thermal inactivation of the strains, and the estimated inactivation rate (k_heat) ranged from 0.42 to 1.33 min⁻¹. The strain variability of k_acid was considerably higher than that of k_heat with the coefficient of variation of this kinetic parameter among the tested strains being 39.0% and 18.3%, respectively. No correlation was observed between the estimated k_acid and k_heat values of the 60 S. enterica strains. Furthermore, no trends among the tested strains related to origin, serotype or antibiotic resistance profile were evident. The present study is the first one to comparatively evaluate the inherent acid and heat resistance profiles of multiple S. enterica strains. Beyond their value in strain selection for use in food safety challenge studies, the collected data should be useful in describing and integrating the strain variability of S. enterica acid and heat resistance profiles in quantitative microbial risk assessment.     

Simulating Future Groundwater Recharge in Coastal and Inland Catchments

Groundwater is a primary source of drinking water in the Mediterranean, however, climate variability in conjunction with mismanagement renders it vulnerable to depletion. Spatiotemporal studies of groundwater recharge are the basis to develop strategies against this phenomenon. In this study, groundwater recharge was spatiotemporally quantified using the Soil and Water Assessment Tool (SWAT) in one coastal and one inland hydrological basin in Greece. A double calibration/validation (CV) procedure using streamflow data and MODIS ET was conducted for the inland basin of Mouriki, whereas only ET values were used in the coastal basin of Anthemountas. Calibration and simulation recharge were accurate in both sites according to statistical indicators and previous studies. In Mouriki basin, mean recharge and runoff were estimated as 16% and 9%, respectively. In Anthemountas basin recharge to the shallow aquifer and surface runoff were estimated as 12% and 16%, respectively. According to the predicted RCP 4.5 and 8.5 scenarios, significant variations in groundwater recharge are predicted in the coastal zone for the period 2020–2040 with average annual recharges decreasing by 30% (RCP 4.5) and 25% (RCP 8.5). Variations in groundwater recharge in the inland catchment of Mouriki were insignificant for the simulated period. Anthemountas basin was characterized by higher runoff rates. Groundwater management in coastal aquifers should include detailed monitoring of hydrological parameters, reinforced groundwater recharge during winter and reduced groundwater abstraction during summer depending on the spatiotemporal distribution of groundwater recharge.

     

3D measures exploitation for a monocular semi-supervised fall detection system

Falls have been reported as the leading cause of injury-related visits to emergency departments and the primary etiology of accidental deaths in elderly. Thus, the development of robust home surveillance systems is of great importance. In this article, such a system is presented, which tries to address the fall detection problem through visual cues. The proposed methodology utilizes a fast, real-time background subtraction algorithm, based on motion information in the scene and pixels intensity, capable to operate properly in dynamically changing visual conditions, in order to detect the foreground object. At the same time, it exploits 3D space’s measures, through automatic camera calibration, to increase the robustness of fall detection algorithm which is based on semi-supervised learning approach. The above system uses a single monocular camera and is characterized by minimal computational cost and memory requirements that make it suitable for real-time large scale implementations.     

Effects of primary and quaternary amine intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber

The effects of primary and quaternary amine modified montmorillonite (MMT) on the nanocomposite formation in an ethylene/propylene/diene rubber (EPDM) were studied. The organoclay was introduced in 10 parts per 100 rubber (phr) amount in the related recipes. X-ray diffraction spectra (XRD) were recorded in various stages of their processing in order to get information about the intercalation process. The curatives found to play a crucial role, as they promote the intercalation/exfoliation phenomena. Incorporation of MMT modified with octadecylamine (MMT-PRIM) in the EPDM and its more polar version (contains maleic anhydride grafted EPDM, EPDM-MA) resulted in intercalated and exfoliated structures, respectively. Deintercalation of the clay (collapse of the layers), generated in both EPDM and EPDM-MA during vulcanization, was attributed to the reactivity of the PRIM and to its ability to participate in complex formation with the curatives (vulcanization intermediates). This explanation was supported by the non-collapse of the MMT layers when the less reactive modifier, viz. octadecyltrimethylamine served as MMT intercalant (MMT-QUAT). In the latter case the corresponding nanocomposite contained mostly intercalated clay layers based on XRD and transmission electron microscopic (TEM) results.