An Advanced Centrifugal Technique to Characterize the Sticking Properties of Tomato Pulp during Drying

An advanced centrifugal technique was developed to characterize the stickiness of tomato pulp at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to six different moisture levels. By noting the rotational speed for a tomato pulp droplet detachment and weighing the mass of the droplet remaining on the surface it is possible to gauge the approximate attachment forces holding the droplet to the substrate. The effects of droplet mass and centrifugation time after reaching the desired rotor speed on the detachment rate were also studied. The detachment force was found to increase at the beginning and then started decreasing as the moisture content decreased presenting a maximum at moisture content of about 34%. In addition, the higher the droplet temperature, the higher the attachment force.     

Shikonin‐loaded liposomes as a new drug delivery system: Physicochemical characterization and in vitro cytotoxicity

Alkannin and shikonin are naturally occurring hydroxynaphthoquinones with a well‐established spectrum of wound healing, antimicrobial, anti‐inflammatory, and antioxidant activities. Recently, extensive scientific effort has been focused on their effectiveness on several tumors and mechanism(s) of antitumor activity. Liposomes have been proved as adequate drug carriers offering significant advantages over conventional formulations, such as controlled release and targeted drug delivery, leading to the appearance of several liposomal formulations in the market, some of them concerning anticancer drugs. The aim of the present study was to prepare shikonin‐loaded liposomes for the first time in order to enhance shikonin therapeutic index. An optimized technique based on the thin film hydration method was developed and liposomes characterization was performed in terms of their physicochemical characteristics, drug entrapment efficiency, and release profile. Results indicated the successful incorporation of shikonin into liposomes, using both 1,2‐dipalmitoylphosphatidylcholine and egg phosphatidylcholine lipids. Liposomes presented good physicochemical characteristics, high entrapment efficiency and satisfactory in vitro release profile. In vitro cytotoxicity of liposomes was additionally tested against three human cancer cell lines (breast, glioma, and non‐small cell lung cancer) showing a moderate growth inhibitory activity. Practical applications: Shikonin is a naturally occurring hydroxynaphthoquinone and extensive scientific research (in vitro, in vivo, and clinical trials) has been conducted during the last years, focusing on its effectiveness on several tumors and mechanism(s) of antitumor action. The purpose of this work was to prepare and characterize shikonin‐loaded liposomes as a new drug delivery system for shikonin. Liposomal formulations provide significant advantages over conventional dosage forms, such as controlled release and targeted drug delivery for anticancer agents. Thus, liposomes could reduce shikonin's side effects, enhance selectivity to cancer cells and protect shikonin from internal biotransformations and instability matters (oxidization and polymerization). Furthermore, liposomal delivery helps overcome the low aqueous solubility of shikonin, which is the major barrier to its oral and internal administration, since it cannot be dissolved and further absorbed from the receptor.     

Estimating design reliability of composite rotor blades under ultimate loading

A probabilistic stress analysis tool predicting reliability of composite wind turbine rotor blades was developed and validated by comparing with results from a three‐dimensional shell finite element model of a blade. Stress analysis was based on thin wall multicellular Euler–Bernoulli beam theory using as input section stress resultants directly from aeroelastic simulations; a finite strip method was implemented for elastic stability calculations. Reliability analysis was performed at the ply level of the multidirectional laminates implementing various methods such as the response surface method, β‐index and crude Monte Carlo simulation. Physical and statistical uncertainties of the basic variables was taken into account while several model uncertainties related to the material properties were further introduced and quantified in the light of appropriate test results. To prove the efficiency of the code as a design tool, the effect of various probabilistic assumptions concerning the material properties was directly investigated on the estimated reliability β‐index values for two rotor blade design cases typical of stall‐regulated and pitch‐regulated wind turbines. Copyright © 2014 John Wiley & Sons, Ltd.     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.     

Simulating Future Groundwater Recharge in Coastal and Inland Catchments

Groundwater is a primary source of drinking water in the Mediterranean, however, climate variability in conjunction with mismanagement renders it vulnerable to depletion. Spatiotemporal studies of groundwater recharge are the basis to develop strategies against this phenomenon. In this study, groundwater recharge was spatiotemporally quantified using the Soil and Water Assessment Tool (SWAT) in one coastal and one inland hydrological basin in Greece. A double calibration/validation (CV) procedure using streamflow data and MODIS ET was conducted for the inland basin of Mouriki, whereas only ET values were used in the coastal basin of Anthemountas. Calibration and simulation recharge were accurate in both sites according to statistical indicators and previous studies. In Mouriki basin, mean recharge and runoff were estimated as 16% and 9%, respectively. In Anthemountas basin recharge to the shallow aquifer and surface runoff were estimated as 12% and 16%, respectively. According to the predicted RCP 4.5 and 8.5 scenarios, significant variations in groundwater recharge are predicted in the coastal zone for the period 2020–2040 with average annual recharges decreasing by 30% (RCP 4.5) and 25% (RCP 8.5). Variations in groundwater recharge in the inland catchment of Mouriki were insignificant for the simulated period. Anthemountas basin was characterized by higher runoff rates. Groundwater management in coastal aquifers should include detailed monitoring of hydrological parameters, reinforced groundwater recharge during winter and reduced groundwater abstraction during summer depending on the spatiotemporal distribution of groundwater recharge.

     

Volatile profile of Stilton cheeses: Differences between zones within a cheese and dairies

Penicillium roqueforti grows and sporulates during the ripening period of blue cheeses and it is responsible for the typical blue cheese flavour formation. However, the sporulation (blue veins) is taking place in a fraction of the total mass and the cheese matrix is highly heterogeneous. The aroma profiles regarding the three different sections of Stilton cheese, blue veins outer crust and white core, were studied using solvent extraction GC–MS, a headspace GC–MS technique (SPME GC–MS) and direct headspace analysis (APCI–MS). Cheeses from different dairies were analysed, allowing the question of how similar are different batches of cheese from different dairies.     

A knowledge-based approach to user interface adaptation from preferences and for special needs

Moving between devices is omnipresent, but not for people with disabilities or those who require specific accessibility options. Setting up assistive technologies or finding settings to overcome a certain barrier can be a demanding task for people without technical skills. Context-sensitive adaptive user interfaces are advancing, although migrating access features from one device to another is very rarely addressed. In this paper, we describe the knowledge-based component of the Global Public Inclusive Infrastructure that infers how a device shall be best configured at the operating system layer, the application layer and the web layer to meet the requirements of a user including possible special needs or disabilities. In this regard, a mechanism to detect and resolve conflicting accessibility policies as well as recommending preference substitutes is a main requirement, as elaborated in this paper. As the proposed system emulates decision-making of accessibility experts, we validated the automatic deduced configurations against manual configurations of ten accessibility experts. The assessment result shows that the average matching score of the developed system is high. Thus, the proposed system can be considered capable of making precise decisions towards personalizing user interfaces based on user needs and preferences.     

Pressure- and Temperature-Driven Flow Through Triangular and Trapezoidal Microchannels

A detailed study of pressure- and temperature-driven flows through long channels of triangular and trapezoidal cross sections is carried out. Due to the imposed pressure and temperature gradients there is a combined gas flow consisting of a thermal creep flow from the cold toward the hot reservoir and a Poiseuille flow from the high- toward the low-pressure reservoir. The formulation is based on the linearized Shakhov model subject to Maxwell boundary conditions, and it is solved numerically using a finite-difference scheme in the physical space and the discrete velocity method in the molecular velocity space. The results are valid in the whole range of the Knudsen number. In addition to the dimensionless flow rates, a methodology is presented to estimate for a certain set of input data the mass flow rates and the pressure distribution along the channel. Finally, special attention is given to the case of zero net mass flow and to the computation of the coefficient of the thermomolecular pressure difference.     

Implementation of a high speed frequency synthesizer employing a dual input phase accumulator

We present a new PLL based frequency synthesizer, in which we have replaced the conventional phase frequency detector and the dividers (programmable counters) with a sequential dual input phase accumulator (DIPA), consisting of a digital circuit employing adders, registers and a ladder. The main feature of the DIPA is that the two input frequencies are not required to be normalized (divided down) to the step frequency of the synthesizer. Instead, the two different high frequencies, that is the reference and the output frequency of the synthesizer, are applied directly. The DIPA samples and normalizes their phases at very high rates, calculates their phase difference, producing an output that consists of a dc component proportional to the phase difference and harmonics of the two input high frequencies. These harmonics are high frequencies and can easily be rejected by a wide bandwidth filter of the loop, without affecting the high convergence speed of the loop. Moreover, these harmonics do not generate spurs near the output frequency. The resolution of the DIPA based synthesizer depends only on the length of the digital word of the DIPA, and its convergence speed depends on the lower of the two input frequencies. The output of the DIPA is a linear function of the phase difference of the two input frequencies and its dynamic range exceeds the limit of ±2π that governs the conventional phase detectors. Thus, the proposed frequency synthesizer based on the DIPA has low phase noise, no spurs nearby the output frequency, high resolution and fast convergence rate. Additionally, the output frequency can be digitally modulated under the control of the closed loop, either by phase or frequency modulation.