Effect of galvanodynamic electrolysis conditions on the properties of a copper powder and the strength of compacts pressed from it

Conclusions Electrolysis under conditions of linear current application ensures that the loose deposit has a fine dendritic structure and enables the formation of particles larger than 220 m to be prevented almost completely. By varying the rate of current application and electrolyte concentration, it is possible to exercise control over certain processing properties of the powder.Translated from Poroshkovaya Metallurgiya, No. 11(287), pp. 4–7, November, 1986.     

Effect of Tensile Stress on Hall Coefficients of Nickel-Base Superalloys

This paper reports on Hall Effect measurements on nickel-base superalloys and their stress dependency. The work is motivated by the desire to develop a nondestructive method of characterizing the near-surface protective residual stress in metals. Our approach is based on the assumption that the Hall coefficient deviates under the stress. It is anticipated that stress measurements based on the Hall Effect are less contaminated by cold work and other effects than conductivity-based measurements such as eddy current. The paper focuses on the two superalloys, Inconel 718 and Inconel 600. The challenge is that Hall coefficients are small in metals, and the stress-induced changes are even smaller. To measure the small effect, the lock-in technique was used, with AC injected current and AC magnetic field. It was found that the Hall coefficients indeed vary proportionally to the stress. The proportionality coefficients are significantly larger than what are estimated from the volumetric effect in a free carrier gas model. The temperature and injected current dependences of the Hall coefficients were also measured, while no dependence on the magnetic flux density was observed.     

Imaging nanometer scale optical heterogeneities in phospholipid monolayers deposited on metal island films

Near-field scanning optical microscopy was applied to study the distribution of fluorescently labeled phospholipid monolayers deposited on the surface of gold island films by the Langmuir-Blodgett technique. Nanometer scale (approximately 50 nm) optical heterogeneities were observed in near-field fluorescence images of the monolayer deposited at 10 mN/m surface pressure. At higher surface pressure (30 mN/m) the heterogeneities became less pronounced. Overlaying of the near-field transmission and fluorescence images from the same area of the sample shows local transmission of gold island film is at a minimum where the fluorescence of the lipid monolayer is at a maximum. It was concluded that coverage of the metal island film by the Langmuir-Blodgett phospholipid monolayer is incomplete, and lipid molecules are preferentially localized in crevices of the film.     

On the extinction of radiation by a homogeneous but spatially correlated random medium: comment

Some extinction laws for radiation transmitted through inhomogeneous random media were discussed by Kostinski [J. Opt. Soc. Am. A 18, 1929 (2001)] by means of a complicated use of concepts of statistical theory of fluids. We show that these extinction laws are readily obtained in terms of classical probability theory. The validity of exponential extinction laws for large observation distances (as compared with the size of inhomogeneities of a medium) is proven and emphasized. It is shown that Kostinski's results turn out to be applicable to small observation distances only, for which the concept of extinction law is hardly applicable.     

What You Always Wanted to Know about Rigid E-Unification

This paper solves an open problem posed by a number of researchers: the construction of a complete calculus for matrix-based methods with rigid E-unification. The use of rigid E-unification and simultaneous rigid E-unification for such methods was proposed by Gallier et al., in 1987. After our proof of the undecidability of simultaneous rigid E-unification in 1995. (Degtyarev and Voronkov, 1996d), it became clear that one should look for more refined techniques to deal with equality in matrix-based methods. In this article, we define a complete proof procedure for first-order logic with equality based on an incomplete but terminating procedure for rigid E-unification. Our approach is applicable to the connection method and the tableau method and is illustrated on the tableau method.     

Electric-Field-Controlled Permittivity Ferroelectric Composition for Microwave LTCC Modules

A low-temperature cofired ferroelectric ceramic composition for electrically tunable radio frequency devices is introduced. A sintering temperature of 950°C for BaSrTiO₃–MgO was obtained following the combined addition of B₂O₃ and Li₂CO₃. The effects of these sintering aids on densification, microstructure, and ferroelectric properties were investigated. The permittivity and dissipation factor values were 234 and 0.0010, respectively, measured at 286.3 K, 1 kHz. The electrically tunable ferroelectric structure for microwave measurement was fabricated throughout the tape-casting process. Measured permittivity was 130 at 26 GHz and tunability >15% (4 V/μm).