Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Multilayer power printed structures suitable for controlling EMI noises generated in power converters

Electromagnetic interference (EMI) noises generated in power converters are diffused on the surface of conductors. This means influences occur from radiated EMI noises emitted from power transmission lines as well as conducted EMI noises transmitted from them. EMI noises diffusing on the surface of conductors are generally difficult to control using conventional concentrated constant theory. Thus, a new approach based on distributed constant circuit theory is needed in order to control EMI noises. A power converter structure to control EMI noises using multilayer power printed circuit technology is studied in this paper. A structure which can control EMI noises should simultaneously satisfy two conditions, i.e., one to shut down and one to attenuate EMI noises. The structure satisfying these conditions is studied through simulations using the Transmission-Line Modeling Method. The simulations show that the diffusion of EMI noises is controlled by dividing the flow of currents produced by EMI noises into the horizontal and perpendicular directions. That is, the horizontal current flow is controlled inside using the differences in the resistance produced from differences between inner and outer diameter of power transmission lines and the perpendicular current flow can be controlled by properly designing the thickness of the dielectric layer sandwiched between P-and N-power transmission lines with the symmetrical structure. Moreover, it is confirmed by simulations and experiments that the attenuation of EMI noises is affected by the width of the power transmission lines. It is expected that the results obtained in this paper can provide important rules when designing power converters with EMI noise control functions which use the multilayer power printed circuit technology.     

Effects of antiallergic drug, pemirolast potassium on phospholipase D activation in antigen-stimulated rat basophilic leukemia (RBL-2H3) cells

An anti-allergic drug, permirolast potassium (TBX), inhibited antigen (Ag)-induced phospholipase D (PLD) activation in rat basophilic leukemia (RBL-2H3) cells. The concentration-dependent inhibitory profile for Ag-induced PLD activation was parallel to those for secretory response and inositol phosphate formation. In contrast, TBX had no effect on PLD activation caused by calcium ionophore A23187 or phorbol myristate acetate. These results suggest that TBX inhibits Ag-induced PLD activation by interfering with the signal transduction pathway upstream of Ca2+ mobilization and protein kinase C activation.     

Hybrid Link/Path-Based Design for Translucent Photonic Network Dimensioning

The advancement of ultralong-haul transmission technology has dramatically enhanced the all-optical reaches. However, the actual situations of installed fiber and sites for terrestrial network often prevent implementing a purely transparent network, and thus, opaque reshaping retiming regenerating (3R) regeneration is required to guarantee optical signal reachability. Since 3R regenerators based on optical/electrical/optical conversion tend to dominate the total network costs, an efficient network design method that allocates a minimum number of 3R regenerators to optimum locations is essential to build a cost-effective photonic network. In this paper, we propose such a network-dimensioning method by combining the advantages of link-based and path-based design approaches. It first guarantees optical signal reachability for any possible traffic demand in each segmented linear link. After combining all the links, excessive regenerators are eliminated based on the optical signal quality check with -factor calculation for each wavelength path. A trial design of a large-scale mesh network demonstrated a significant cost savings of more than 30% in comparison with a conventional link-based design. In the trial, the impact of fiber loss coefficient over the total network cost was investigated quantitatively, addressing the importance of such quantitative modeling and analysis.     

A practical guide to the measurement of structure phases and magnitudes by three-beam convergent beam electron diffraction

The practical details for the direct measurement of structural phases and magnitudes from centrosymmetric crystals using three-beam convergent beam electron diffraction patterns are given. These details are presented as a step-by-step guide for easy implementation. Each step is illustrated with worked examples from alpha-Al(2)O(3). Twenty-nine measurements of 6 independent three-phase invariants and 87 measurements of 10 independent structure magnitudes have been made.     

Electrospinning of poly(vinylpyrrodine) template for formation of ZrO2 nanoclusters for enhancing properties of composite proton conducting membranes

Nanosized ZrO₂ clusters were prepared by electrospinning a poly(vinylpyrrodine) (PVP)/ZrO₂ mixture for calcination to remove PVP template and sizing. The morphological, chemical, structural, and thermal resistance changes during preparation stages were investigated using scanning electron microscope, energy-dispersive X-ray spectroscopy, transmission electron microscope, X-ray diffraction, and thermogravimetric analysis. The obtained ZrO₂ clusters were used for preparation of nanocomposite membranes by dispersion in 2,6-pyridine polybenzimidazole (2,6-Py-PBI) matrix at 5?wt% content followed by phosphoric acid (PA) doping. The ZrO₂ nanoclusters were found to be uniformly distributed in 2,6-Py-PBI/PA matrix leading to a remarkable increase in the PA doping level and proton conductivity of the obtained composite membrane.     

Cooperative Control by System Voltage Control Equipments in Consideration of Reducing Capacity of STATCOM

In recent years, the number of renewable energy sources (RESs) such as photovoltaic generation systems and wind power generation systems connected to the grid has been increasing as a way of reducing negative effects on the environment. The outputs of these RESs vary rapidly because of the influence of the weather and the conditions of the location. Therefore, there are concerns that the point voltages in a distribution system may vary drastically and that the voltages may deviate from the appropriate voltage range as a result of the influence of the RES connected to the distribution system or to the diversification of loads. Furthermore, there are concerns about adverse effects on electric power quality, such as voltage imbalances and harmonics. In this paper, we propose a cooperative voltage control method for a distribution system using system voltage control equipment in order to reduce the capacity of the static synchronous compensator. Numerical calculations were performed in order to verify the validity of the proposed method.     

Pollution control of actual flue gas using pulsed power at a thermal power plant

There are several important environmental problems in the world. One of them is acid rain caused by combustion flue gases from thermal power plants, factories, and automobiles. Different kinds of gas discharges, such as surface discharge, dc and ac corona discharge, silent discharge, and electron beam controlled discharge, have been studied for the removal of NO_x and SO₂ from flue gases. The recent development of repetitive pulsed power generators gives the pulsed steamer corona discharges a chance of success in the removal of NO_x and SO₂. In this paper, the experimental results of NO_x and SO₂ removal by a repetitive pulse power generator are described. The actual flue gas at a thermal power plant was used. It is shown that about 90% of the NO was removed at a flow rate of 0.8 liters/min and a repetition rate of 7 pps. © 2001 Scripta Technica, Electr Eng Jpn, 134(4): 28–35, 2001     

Optimization of exit-plane waves restored from HRTEM through-focal series

Atomic-resolution transmission electron microscopy has largely benefited from the implementation of aberration correctors in the imaging part of the microscope. Though the dominant geometrical axial aberrations can in principle be corrected or suitably adjusted, the impact of higher-order aberrations, which are mainly due to the implementation of non-round electron optical elements, on the imaging process remains unclear. Based on a semi-empirical criterion, we analyze the impact of residual aperture aberrations on the quality of exit-plane waves that are retrieved from through-focal series recorded using an aberration-corrected and monochromated instrument which was operated at 300 kV and enabled for an information transfer of ∼0.05 nm. We show that the impact of some of the higher-order aberrations in retrieved exit-plane waves can be balanced by a suitable adjustment of symmetry equivalent lower-order aberrations. We find that proper compensation and correction of 1st and 2nd order aberrations is critical, and that the required accuracy is difficult to achieve. This results in an apparent insensitivity towards residual higher-order aberrations. We also investigate the influence of the detector characteristics on the image contrast. We find that correction for the modulation transfer function results in a contrast gain of up to 40%.     

An automatic Euler solver using the unstructured upwind method

A fully-automatic grid generator and an unstructured upwind method for the Euler equations are developed in order to achieve automation in flow computations. The unstructured grid is generated using two techniques: a geometry-adaptive refinement; and a solution-adaptive refinement. The former introduces information about the flowfield geometry into the grid, and the latter introduces the fluid physics. A combination of these two techniques enables the generation of a grid in a fully-automatic manner. Flowfields are solved by an unstructured upwind solver, which is an extension of the flux-vector splitting method of Van Leer for use on arbitrary-shaped unstructured meshes. This robust flow solver with the automatic grid generator can be a useful CFD tool for routine engineering work. The method is applied to external and internal flow problems to demonstrate its capability.