Garlic extract and its selected organosulphur constituents promote ileal immune responses ex vivo

The effects of garlic extract and three organosulphur compounds of garlic on intestinal immune responses in mice were investigated. Peyer’s patch (PP) cells were isolated from mice orally administered with garlic extracts or one of three organosulphur compounds (alliin, allicin, diallyl disulphide (DADS)). PP cells isolated from mice that had been orally injected with ethanol extract significantly produced interferon (IFN)-γ and interleukin (IL)-4. IL-2 production in PP cells was significantly reduced by hot-water and ethanol extracts from garlic. PP cells from mice administered with two organosulphur compounds, alliin or DADS (5 mg/kg/day), could produce IL-2, IFN-γ and IL-4, whereas allicin showed moderate activity. The enhancement activity of IL-2 and IFN-γ productions in PP cells by DADS was higher than those obtained by administration of alliin or allicin. Comprehensive analyses of genetic profiles in PP tissue from mice administered with ethanolic extracts, allicin or alliin revealed that oral administration of samples increased 68–144 genes and decreased 50–52 genes by ?1.8-fold. Analyses of clustering profiles of microarrays indicated that ethanol extract and alliin upregulated the expression of IFN-γ. These data showed that garlic and its organosulphur compounds stimulate de novo IFN-γ biosynthesis in PP cells, thereby promoting ileal immune responses.     

Sphingomyelinase C from Streptomyces sp. A9107: Unusual primary structure for bacterial sphingomyelinase C

A sphingomyelinase C (SMase) was identified in the culture supernatant of Streptomyces sp. A9107 (S-SMase). Although S-SMase seems to be a typical bacterial SMase, the primary structure of S-SMase was unusual for known bacterial SMase. The gene was functionally overexpressed in the culture medium of recombinant Rhodococcus erythropolis.     

Charge resolution of CR-39 plastic nuclear track detectors for intermediate energy heavy ions

The charge resolution (δZ) for heavy ions (nuclear charge: Z < 40) of 0.1-1 GeV/n energy in CR-39 plastic nuclear track detector (PNTD) and its dependence on etching time, and on projectile Z and energy were investigated and optimized as part of an effort to make precise measurements of projectile charge-changing cross sections. Two types of CR-39 PNTD, HARZLAS TD-1 and BARYOTRAK, were exposed to heavy ion beams with seven values of Z behind thick targets to produce projectile fragments. Following chemical etching (7 N NaOH at 70 °C) for varying etch times, δZ of the projectiles was determined for each detector type. A strong dependence of δZ on the amount of bulk etch (B) was seen. It was also observed that δZ can be remarkably improved with longer etching time as a function of B^−1/2, in accordance with the trend seen in other types of track detector such as glass nuclear track detector. However, for B ? 60 μm (30 h etching), saturation occurs and there is no further improvement in δZ. Analysis of the correlations between projectile Z, energy, detector response, and fluctuation of the response make it possible to develop a model to predict the δZ for projectiles of given Z and energy. The predicted and measured values of δZ show good agreement within 10%. We conclude that 4 ? Z ? 30 at intermediate energy can be identified with good δZ in these detectors. The predictive model will be used in designing future cross section measurement experiments.     

Decomposition kinetics and recycle of binary hydrogen‐tetrahydrofuran clathrate hydrate

Decomposition kinetics and recycle of hydrogen–tetrahydrofuran (H₂–THF) clathrate hydrates were investigated with a pressure decay method at temperatures from 265.1 to 273.2 K, at initial pressures from 3.1 to 8.0 MPa, and at stoichiometric THF hydrate concentrations for particle sizes between 250 and 1000 μm. The decomposition was modeled as a two‐step process consisting of H₂ diffusion in the hydrate phase and desorption from the hydrate cage. The adsorption process occurred at roughly two to three times faster than the desorption process, whereas the diffusion process during formation was slightly higher (ca. 20%) than that during decomposition. Successive formation and decomposition cycles showed that occupancy seemed to decrease only slightly with cycling and that there were no large changes in hydrate structure due to cycling. Results provide evidence that the formation and decomposition of H₂ clathrate hydrates occur reversibly and that H₂ clathrate hydrates can be recycled with pressure. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Changes in the melting temperature and crystal structure of poly(vinylidene fluoride) by knotting

A significant increase in the melting temperature of knotted fibers of poly(vinylidene fluoride) (PVDF) was detected by differential scanning calorimetry. The melting peak partially returned to the original peak after the fibers were unknotted. Knotted PVDF fibers were observed with an optical microscope at crossed‐nicol conditions. The knotted portions of the fibers showed birefringence even above the melting temperature of the fibers before knotting. The dependence of the physical properties of PVDF under applied stress was estimated in order to investigate the influence of knotting. The fracture temperature of PVDF fibers increased with applied stress below 1 MPa and decreased above 10 MPa because the applied stress increased the melting temperature of PVDF crystals, but strong stress mechanically broke the fibers. The X‐ray diffraction patterns of the PVDF fibers under different stress were divided into the peaks of α‐ and β‐phase crystals and amorphous. The peak area of the β‐phase crystal increased and that of the amorphous decreased with applied stress. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A Unique Approach to Characterization of Sol‐Gel‐Derived Rare‐Earth‐Doped Oxyfluoride Glass‐Ceramics

Using the sol‐gel route Nd³⁺‐doped oxyfluoride glass‐ceramics were prepared. LiYF₄ and YF₃ crystals were deposited in the glass‐ceramics and their size, distribution, and amount ratio were varied by changing the compositions and heating temperatures. The incorporation of Nd³⁺ ions into both the fluoride crystals was confirmed by the high‐resolution elemental mapping of the glass‐ceramics. The incorporated Nd³⁺ ions showed up and down conversion photoluminescence whose properties were obviously different among the samples. The preliminary site analysis for Nd³⁺ ions was carried out using a unique approach associated with the Prony series approximation. Finally, the approach was found to be useful for the analysis of materials that are structurally complicating.     

Laser manipulation of micro untransmissive particles in water

The laser trapping of untransmissive particles are discussed in this paper. Photon can generate the momentum to the untransmissive particle by diffraction and reflection on the surface of the particles. We tried laser trapping of untransmissive particles using an attractive force caused by the diffraction and radiation force caused by reflection. The laser trapping system includes CW YAG laser, which has 1.064 μm in wave length and an optical microscope. The motions of particles were monitored by a CCD camera on the top of the microscope and recorded by PC connected to the CCD camera.     

Structure and Viscosity of Grain Boundary in High-Purity SiAlON Ceramics

Three high-purity SiAlON materials (Si_{6− z} Al _z O _z N_{8− z} , z = 1, 2, 3) were characterized with respect to both structure and viscous behavior of internal grain boundaries. Internal friction experiments provided a direct measure of the intrinsic viscosity of grain boundaries and concurrently revealed the occurrence of a grain-boundary interlocking mechanism that suppressed sliding. A residual glass phase (consisting of aluminum-rich SiO₂) and nanometer-sized mullite residues were found at glassy triple-grain junctions of the z = 1 SiAlON. A low-melting intergranular phase dominated the high-temperature behavior of this material and caused grain-boundary sliding at temperatures as low as 1100°C. A quantitative analysis of the grain-boundary internal friction peak as a function of oscillation frequency indicated an intergranular film viscosity of log η∼ 7.5 Pa · s at 1100°C. Glass-free grain boundaries were a characteristic of SiAlON materials with z ≥ 2, which yielded a significant improvement in refractoriness as compared to the z = 1 SiAlON material. In these materials, relaxation resulting from grain-boundary sliding was suppressed, and the internal friction curve simply experienced an exponential-like increase.     

Porous Titania Ceramic Prepared by Mimicking Silicified Wood

A porous titania ceramic with a woodlike microstructure that was analogous to silicified wood was prepared. The production of "titanified wood" was performed using the following process: (i) introduction of titanium tetraisopropoxide into wood materials via vacuum infiltration, (ii) hydrolysis of the titanium tetraisopropoxide in the cell structure to form a titania gel, and (iii) firing at a temperature of 600°–1400°C in air. The resulting titania ceramic had the same external and internal forms of the original wood.     

Method of determination of the effective capacity of refrigeration and A/C units of variable speeds

A new evaluation method of transport refrigeration and A/C units is presented. This method allows the overall cooling performance during truck or bus operation, with respect to different engine speeds and driving styles, to be taken into account. The use of this method is demonstrated in the evaluation of two refrigeration units.