Dopant Migration-Induced Interface Dipole Effect in n-Doped GaAs/AlGaAs Terahertz Detectors

A heterojunction interfacial workfunction internal photoemission (HEIWIP) terahertz detector with ~1times10¹⁸cm^-3 n-type doped GaAs emitters in a multilayer GaAs/Al_0.13Ga_0.87 As heterostructure is presented. The detection mechanism is based on free carrier absorption with a broad response extending to ~ 5.26 THz (57 mum), corresponding to an effective workfunction of ~ 21.8 meV, which is much smaller than the offset expected for an Al fraction of x = 0.13 at a 1times10¹⁸ cm^-3 doping. This is attributed to a reduction of the conduction band offset by interface dipole formation between the accumulated negative charges at the interface states and migrated positively charged donors in the barrier. The device has a peak responsivity of 0.32 A/W at ~ 26 mum at 5 K. It is demonstrated that the dopant migration-induced interface dipole effect can be used to extend the zero response threshold frequency (f ₀) of n-type HEIWIP detectors.     

Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

Closed-Form Analysis of Various Diversity Techniques for Multiband OFDM UWB System Over Log-Normal Fading Channels

Wireless Personal Communications - In this paper, we investigate the effect of multipath fading on the combined signal-to-noise ratio (SNR) in conjunction with multiband orthogonal frequency...     

LI-BIST: A Low-Cost Self-Test Scheme for SoC Logic Cores and Interconnects

For system-on-chips (SoC) using deep submicron (DSM) technologies, interconnects are becoming critical determinants for performance, reliability and power. Buses and long interconnects being susceptible to crosstalk noise, may lead to functional and timing failures. Existing at-speed interconnect crosstalk test methods propose inserting dedicated interconnect self-test structures in the SoC to generate vectors which have high crosstalk defect coverage. However, these methods may have a prohibitively high area overhead. To reduce this overhead, existing logic BIST structures like LFSRs could be reused to deliver interconnect tests. But, as shown by our experiments, use of LFSR tests achieve poor crosstalk defect coverage. Additionally, it has been shown that the power consumed during testing can potentially become a significant concern.In this paper, we present Logic-Interconnect BIST (LI-BIST), a comprehensive self-test solution for both the logic of the cores and the SoC interconnects. LI-BIST reuses existing logic BIST structures but generates high-quality tests for interconnect crosstalk defects, while minimizing the area overhead and interconnect power consumption. The application of the LI-BIST methodology on example SoCs indicates that LI-BIST is a viable, low-cost, yet comprehensive solution for testing SoCs.     

Conservative Approximation–Based Full‐Search Block Matching Algorithm Architecture for QCIF Digital Video Employing Systolic Array Architecture

This paper presents a power‐efficient hardware realization for a motion estimation technique that is based on the full‐search block matching algorithm (FSBMA). The considered input is the quarter common intermediate format of digital video. The mean of absolute difference (MAD) is the distortion criteria employed for the block matching process. The conventional architecture considered for the hardware realization of FSBMA is that of the shift register–based 2‐D systolic array. For this architecture, a conservative approximation technique is adapted to eliminate unnecessary MAD computations involved in the block matching process. Upon introducing the technique to the conventional architecture, the power and complexity of its implantation is reduced, while the accuracy of the motion vector extracted from the block matching process is preserved. The proposed architecture is verified for its functional specifications. A performance evaluation of the proposed architecture is carried out using parameters such as power, area, operating frequency, and efficiency.     

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li_1.2Mn_0.6Ti_0.2O_1.8F_0.2, based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g⁻¹ and specific energy of 754 Wh kg⁻¹, with 206 mAh g⁻¹ retained after 200 cycles. The combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.     

Using channel state dependent packet scheduling to improve TCPthroughput over wireless LANs

In recent years, a variety of mobile computers equipped with wireless communication devices have become popular. These computers use applications and protocols, originally developed for wired desktop hosts, to communicate over wireless channels. Unlike wired networks, packets transmitted on wireless channels are often subject to burst errors which cause back to back packet losses. In this paper we study the effect of burst packet errors and error recovery mechanisms employed in wireless MAC protocols on the performance of transport protocols such as TCP. Most wireless LAN link layer protocols recover from packet losses by retransmitting lost segments. When the wireless channel is in a burst error state, most retransmission attempts fail, thereby causing poor utilization of the wireless channel. Furthermore, in the event of multiple sessions sharing a wireless link, FIFO packet scheduling can cause the HOL blocking effect, resulting in unfair sharing of the bandwidth. This observation leads to a new class of packet dispatching methods which explicitly take wireless channel characteristics into consideration in making packet dispatching decisions. We compare a variety of channel state dependent packet (CSDP) scheduling methods with a view towards enhancing the performance of transport layer sessions. Our results indicate that by employing a CSDP scheduler at the wireless LAN device driver level, significant improvement in channel utilization can be achieved in typical wireless LAN configurations. This revised version was published online in July 2006 with corrections to the Cover Date.     

Performance comparison of battery power consumption in wireless multiple access protocols

Energy efficiency is an important issue in mobile wireless networks since the battery life of mobile terminals is limited. Conservation of battery power has been addressed using many techniques such as variable speed CPUs, flash memory, disk spindowns, and so on. We believe that energy conservation should be an important factor in the design of networking protocols for mobile wireless networks. In particular, this paper addresses energy efficiency in medium access control (MAC) protocols for wireless networks. The paper develops a framework to study the energy consumption of a MAC protocol from the transceiver usage perspective. This framework is then applied to compare the performance of a set of protocols that includes IEEE 802.11, ECMAC, PRMA, MDRTDMA, and DQRUMA*. The performance metrics considered are transmitter and receiver usage times for packet transmission and reception. The time estimates are then combined with power ratings for a Proxim RangeLAN2 radio card to obtain an estimate of the energy consumed for MAC related activities. The analysis here shows that protocols that aim to reduce the number of contentions perform better from an energy consumption perspective. The receiver usage time, however, tends to be higher for protocols that require the mobile to sense the medium before attempting transmission. The paper also provides a set of principles that could be applied when designing access protocols for wireless networks.*ECMAC: energyconserving MAC. PRMA: packet reservation multiple access. MDRTDMA: multiservices dynamic reservation TDMA. DQRUMA: distributedqueuing request update multiple access.     

On the speedup required for work-conserving crossbar switches

This paper describes the architecture for a work-conserving server using a combined I/O-buffered crossbar switch. The switch employs a novel algorithm based on output occupancy, the lowest occupancy output first algorithm (LOOFA), and a speedup of only two. A work-conserving switch provides the same throughput performance as an output-buffered switch. The work-conserving property of the switch is independent of the switch size and input traffic pattern. We also present a suite of algorithms that can be used in combination with LOOFA. These algorithms determine the fairness and delay properties of the switch. We also describe a mechanism to provide delay bounds for real-time traffic using LOOFA. These delay bounds are achievable without requiring output-buffered switch emulation     

Synergistic Use of Pyridine and Selenophene in a Diketopyrrolopyrrole‐Based Conjugated Polymer Enhances the Electron Mobility in Organic Transistors

To achieve semiconducting materials with high electron mobility in organic field‐effect transistors (OFETs), low‐lying energy levels (the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO)) and favorable molecular packing and ordering are two crucial factors. Here, it is reported that the incorporation of pyridine and selenophene into the backbone of a diketopyrrolopyrrole (DPP)‐based copolymer produces a high‐electron‐mobility semiconductor, PDPPy‐Se. Compared with analogous polymers based on other DPP derivatives and selenophene, PDPPy‐Se features a lower LUMO that can decrease the electron transfer barrier for more effective electron injection, and simultaneously a lower HOMO that, however, can increase the hole transfer barrier to suppress the hole injection. Combined with thermal annealing at 240 °C for thin film morphology optimization to achieve large‐scale crystallite domains with tight molecular packing for effective charge transport along the conducting channel, OFET devices fabricated with PDPPy‐Se exhibit an n‐type‐dominant performance with an electron mobility (μ_e) as high as 2.22 cm² V^?1 s^?1 and a hole/electron mobility ratio (μ_h/μ_e) of 0.26. Overall, this study demonstrates a simple yet effective approach to boost the electron mobility in organic transistors by synergistic use of pyridine and selenophene in the backbone of a DPP‐based copolymer.