Solvent‐Assisted Low‐Temperature Crystallization of SnO2 Electron‐Transfer Layer for High‐Efficiency Planar Perovskite Solar Cells

A high‐quality polycrystalline SnO₂ electron‐transfer layer is synthesized through an in situ, low‐temperature, and unique butanol–water solvent‐assisted process. By choosing a mixture of butanol and water as a solvent, the crystallinity is enhanced and the crystallization temperature is lowered to 130 °C, making the process fully compatible with flexible plastic substrates. The best solar cells fabricated using these layers achieve an efficiency of 20.52% (average 19.02%) which is among the best in the class of planar n–i–p‐type perovskite (MAPbI₃) solar cells. The strongly reduced crystallization temperature of the materials allows their use on a flexible substrate, with a resulting device efficiency of 18%.     

Electron Transfer in a Bio-Photoelectrode Based on Photosystem I Multilayer Immobilized on the Conducting Glass

A film of ~40 layers of partially oriented photosystem I (PSI) complexes isolated from the red alga Cyanidioschyzon merolae formed on the conducting glass through electrodeposition was investigated by time-resolved absorption spectroscopy and chronoamperometry. The experiments were performed at a range of electric potentials applied to the film and at different compositions of electrolyte solution being in contact with the film. The amount of immobilized proteins supporting light-induced charge separation (active PSI) ranged from ~10%, in the absence of any reducing agents (redox compounds or low potential), to ~20% when ascorbate and 2,6-dichlorophenolindophenol were added, and to ~35% when the high negative potential was additionally applied. The origin of the large fraction of permanently inactive PSI (65–90%) was unclear. Both reducing agents increased the subpopulation of active PSI complexes, with the neutral P700 primary electron donor, by reducing significant fractions of the photo-oxidized P700 species. The efficiencies of light-induced charge separation in the PSI film (10–35%) did not translate into an equally effective generation of photocurrent, whose internal quantum efficiency reached the maximal value of 0.47% at the lowest potentials. This mismatch indicates that the vast majority of the charge-separated states in multilayered PSI complexes underwent charge recombination.     

Triangular Bézier surface patches in modeling shape of boundary geometry for potential problems in 3D

This paper presents a new boundary shape representation for 3D boundary value problems based on parametric triangular Bézier surface patches. Formed by the surface patches, the graphical representation of the boundary is directly incorporated into the formula of parametric integral equation system (PIES). This allows us to eliminate the need for both boundary and domain discretizations. The possibility of eliminating the discretization of the boundary and the domain in PIES significantly reduces the number of input data necessary to define the boundary. In this case, the boundary is described by a small set of control points of surface patches. Three numerical examples were used to validate the solutions of PIES with analytical and numerical results available in the literature.     

Modification of Fe and Al elemental powders’ sintering with addition of magnesium and magnesium hydride

An attempt to modify sintering of iron and aluminium elemental powders with use of small additions of Mg and MgH₂ was presented in this paper. The kinetics of such modified sintering was investigated using DSC technique, XRD analysis and SEM observations. Significant changes in the mechanism of exothermal formation reaction of Fe–Al intermetallic phases in compositions doped with magnesium and its hydride was observed. Initiation temperature of Self-propagating High-temperature Synthesis (SHS) reaction was pronouncedly shifted to lower value as compared with undoped composition. Influence of additions on the SHS reaction kinetics parameters was also calculated with use of the JMA model and changes of the Avrami exponent value of specific phase formation was noticed. Positive effect of MgH₂ addition on partial homogeneity of final product was also studied.     

Investigations on printed elastic resistors containing carbon nanotubes

This paper presents the results of authors investigations on elaboration of a new thick film composition filled with carbon nanotubes (CNTs). The polymer composition consists of polymer vehicle, which is the solution of organic resin in certain combination of solvents, and functional phase—carbon nanotubes well dispersed in the vehicle. The pastes were applied with screen-printing on several substrates and temperature cured. The properties of obtained layers were characterized. Series of samples were prepared with different amount of CNTs to evaluate electrical properties. Changes in resistance were investigated during periodic mechanical and temperature stresses, realized through cyclical bending and rapid temperature change. Tensometric effect was also investigated. Investigations have proved that polymer composites based on carbon nanotubes exhibit high resilience to stress factors. Resistance change in function of temperature was also investigated to evaluate temperature coefficient of resistance (TCR). All this aspects are important for elastic resistors fabrication in printed electronics microcircuits. Resistance and noise measurements in cryostats have also been involved. 1/f type noise has been observed. Noise intensity, calculated in decade frequency bands, rises significantly with increasing temperature. Activation energies of thermally activated noise sources (TANS) have been revealed using low-frequency noise spectroscopy. Relatively large value of negative TCR has been obtained from resistance versus temperature curve. Calculated dimensionless sensitivity is similar to that observed in cryogenic temperature sensors. However, bulk noise intensity of resistive layer is larger than obtained for lead containing RuO₂ based resistive layers.     

Microstructure Evolution as an Effect of Strain Reversal During the Hot Deformation of Microalloyed Steels

Susceptibility of the steel for further cold processing strongly depends on the whole prior history of deformation in the hot working regime.In the industrial hot working processes,e.g.at the roughing stage of hot rolling,or forging,material undergoes complex deformation modes that leads to gradients of both microstructure and properties across the deformed cross-section.Torsion and multiaxial compression tests with different amounts of strain reversals were conducted at elevated temperatures to study the effect of applied strain path on the phenomena occurring during microstructure evolution of Nb-microalloyed steels.Gathered results will provide data for the modification of existing constitutive equations that mostly do not account for the strain path changes.Better through-process modelling will then enable to achieve better properties and quality of the products for further cold processing.     

Determination of Physical and Chemical Properties of Electric Arc Furnace Dusts for the Purposes of Their Utilization

Electric arc furnace dusts are among the most environment polluting wastes. Numerous utilization technologies have been developed for dusts containing up to 4% of Zn and more than 20% of Zn. However, the remaining part of steelmaking dusts are the most problematic ones, as they are mostly dumped generating costs and posing serious environmental threats. This paper provides an analysis of the potential utilization options for dusts containing ca. 10% of zinc generated in a single electric steelmaking shop. Physical and chemical properties of dusts have been determined and examined, and furthermore, results of the studies on the EAFD utilization in production of cement clinker and industrial glass have been discussed. It has been found that a particularly beneficial feature of the production technology proposed is that the iron content exceeds 30%. The influence of the dusts used on the functional properties of the products obtained has been established as well as the environmental impact of the processes and products in question and the dust mass possible to be utilized in the production technology proposed have been determined.     

Hydrogen Evolution on Binary and Ternary Cobalt Alloys Deposited With Superimposed Magnetic Field

The article presents results of electrodeposition of Co-Mo Co-Mo-C alloys in a magnetic field characterized by low overvoltage of hydrogen evolution.Addition of molybdenum and carbon was to lower the values of overvoltage of hydrogen evolution on cobalt.The influence of bath pH,bath composite,current density and magnetic field with different orientation on the deposits composition,structure and overpotential for hydrogen evolution reaction(HER)was determined.Electrocatalytic properties of the obtained alloy coatings within the range of hydrogen evolution were tested in a concentrated NaOH solution.The comparison of electrocatalytic properties of Co-Mo alloys with properties of Co-Mo-C ones enabled determining the influence of carbon presence in cathodic deposits on the overpotential values for hydrogen evolution.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Use of the radiofrequency-intermodulation distortion technique to investigate intrinsic nonlinearity at the electrode-electrolyte interface

We report on investigations of nonlinear radiofrequency responses of electrolytes with Na(+) and Cl(-) ions placed within gold electrodes of a capacitor. The sample was part of a frequency-adjustable inductance-capacitance-resistance (LCR) parallel resonant circuit, and measurements were carried out using the two frequencies intermodulation distortion technique. We employed double layer model to analyze the observed nonlinearities and their dependence on ionic concentration. Electrode-electrolyte interface polarization was found to be a predominant cause of this intrinsic nonlinearity and to be dependent on electrolytic ion concentration. We also measured and calculated coefficients of resistive and capacitive components of the observed nonlinearity.