Characterization of a class of spatially interconnected systems (ladder circuits) using two-dimensional systems theory

Multidimensional Systems and Signal Processing - This paper considers a class of spatially interconnected systems formed by ladder circuits using two-dimensional systems theory. The individual...     

Why Do We Need More Active ATRP Catalysts?

Atom transfer radical polymerization (ATRP) is a staple technique for the preparation of polymers with well-defined architecture. In ATRP, the catalyst governs the equilibrium between propagating radicals and dormant species, thus affecting the polymerization control for a range of monomers and transferable atoms employed in the process. The design and the use of highly active catalysts could diminish the amount of transition metal complexes, extend ATRP to less active monomers and give access to new chain-end functionalities. At the same time, very active catalysts can be involved in formation of organometallic species. Herein, the role of the catalyst on the ATRP equilibrium is carefully elucidated, together with recent observations on the impact of the catalyst nature on formation of organometallic species and relevant side reactions. Based on this knowledge, a perspective on the benefits and challenges that derive from the use of highly active ATRP catalysts is presented.     

Insect Gut Bacteria Promoting the Growth of Tomato Plants (Solanum lycopersicum L.)

Simple SummaryA new sources of plant growth-promoting (PGP) bacteria are needed to increase the agricultural crops without increasing the usage of chemicals. The aim of this study was to test the hypothesis that insect-gut bacteria promote tomato plant growth. The insect gut bacteria were screened for the presence of PGP traits. The plants treated with bacterial consortium showed a significant increase in fruit yield, in both number of fruits (+41%) and weight of fruits (+44%). Our results showed that: (i) D. virgifera gut’s bacteria significantly promote the growth of tomato plants, and (ii) bacteria other than plant-related can be considered as PGP. It must be underlined that even though the insect gut bacteria were proven to stimulate the plant’s growth, their practical usage must be preceded by an examination of their influence on ecological and biological safety.AbstractWe investigated gut bacteria from three insect species for the presence of plant growth properties (PGP). Out of 146 bacterial strains obtained from 20 adult specimens of Scolytidae sp., 50 specimens of Oulema melanopus, and 150 specimens of Diabrotica virgifera, we selected 11 strains displaying the following: PGP, phosphate solubility, production of cellulase, siderophore, lipase, protease, and hydrogen cyanide. The strains were tested for growth promotion ability on tomato (Lycopersicon esculentum) plants. Each strain was tested individually, and all strains were tested together as a bacterial consortium. Tomato fruit yield was compared with the negative control. The plants treated with bacterial consortium showed a significant increase in fruit yield, in both number of fruits (+41%) and weight of fruits (+44%). The second highest yield was obtained for treatment with Serratia liquefaciens Dv032 strain, where the number and weight of yielded fruits increased by 35% and 30%, respectively. All selected 11 strains were obtained from Western Corn Rootworm (WCR), Diabrotica virgifera. The consortium comprised: Ewingella americana, Lactococcus garvieae, L. lactis, Pseudomonas putida, Serratia liquefaciens, and S. plymuthica. To our knowledge, this is the first successful application of D. virgifera gut bacteria for tomato plant growth stimulation that has been described.     

Thermal decomposition kinetics of dynamically vulcanized polyamide 6–acrylonitrile butadiene rubber–halloysite nanotube nanocomposites

Thermally stable thermoplastic elastomer nanocomposites based on polyamide 6 (PA6), acrylonitrile butadiene rubber (NBR), and halloysite nanotubes (HNTs) were dynamically vulcanized, and their nonisothermal decomposition kinetics were examined. The Friedman, Kissinger–Akahira–Sunose (KAS), Ozawa–Wall–Flynn (FWO), and modified Coats–Redfern (m-CR) isoconversional models were used to obtain information about the kinetics of the thermal decomposition of PA6–NBR–HNTs in terms of the activation energy per partial mass loss monitored through thermogravimetric analyses performed at different heating rates. An erratic trend was due to the Friedman model, especially for systems having higher HNT loadings, whereas the KAS, FWO, and m-CR models revealed very similar meaningful thermal decomposition kinetics. A relatively high activation energy corroborating a reliable thermal stability was obtained by the addition of HNTs to PA6–NBR, and the resistance against decomposition was higher for systems containing more HNT. This signified the role of the HNTs as thermal stability modifiers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47483.     

Structural studies of poly(butyl acrylate) - poly(ethylene oxide) miktoarm star polymers

Structural behavior of miktoarm star polymers comprising poly(butyl acrylate) (PBA) and poly(ethylene oxide) (PEO) arms was studied by means of Differential Scanning Calorimetry (DSC), Wide Angle X-Ray Scattering (WAXS), Polarized Optical Microscopy (POM) and Fourier Transform Infrared Spectroscopy (FTIR) methods. The aim of this study was to correlate changes in the composition of the arms of the PBA/PEO miktoarm star polymers with their structures. As a consequence of increasing PBA content, the decrease in crystallinity of the studied PBA/PEO heteroarm star copolymers was observed. Regardless of the copolymer composition, fraction of oxyethylene units in the crystalline PEO phase was similar in all investigated systems. The POM images showed spherulitic morphology of the materials having low PBA content, while an increase in PBA arms fraction leads to the formation of less ordered structures. The analysis of FTIR vibrational spectrum indicates helical conformation of PEO chains in the crystalline phase. Isothermal crystallization studies carried out using the FTIR technique suggest the existence of isolated domains in the nanoscopic scale of investigated materials.     

Conversion efficiency of glucose/xylose mixtures for ethanol production using Saccharomyces cerevisiae ITV01 and Pichia stipitis NRRL Y‐7124

BACKGROUND: Efficient conversion of glucose/xylose mixtures from lignocellulose is necessary for commercially viable ethanol production. Oxygen and carbon sources are of paramount importance for ethanol yield. The aim of this work was to evaluate different glucose/xylose mixtures for ethanol production using S. cerevisiae ITV‐01 (wild type yeast) and P. stipitis NRRL Y‐7124 and the effect of supplying oxygen in separate and co‐culture processes. RESULTS: The complete conversion of a glucose/xylose mixture (75/30 g L^?1) was obtained using P. stipitis NRRL Y‐7124 under aerobic conditions (0.6 vvm), the highest yield production being Y_p/s = 0.46 g g^?1, volumetric ethanol productivity Q_pmax = 0.24 g L^?1 h^?1 and maximum ethanol concentration P_max = 34.5 g L^?1. In the co‐culture process and under aerobic conditions, incomplete conversion of glucose/xylose mixture was observed (20.4% residual xylose), with a maximum ethanol production of 30.3 g L^?1, ethanol yield of 0.4 g g^?1 and Q_pmax = 1.26 g L^?1 h^?1. CONCLUSIONS: The oxygen present in the glucose/xylose mixture promotes complete sugar consumption by P. stipitis NRRL Y‐7124 resulting in ethanol production. However, in co‐culture with S. cerevisiae ITV‐01 under aerobic conditions, incomplete fermentation occurs that could be caused by oxygen limitation and ethanol inhibition by P. stipitis NRRL Y‐7124; nevertheless the volumetric ethanol productivity increases fivefold compared with separate culture. Copyright © 2011 Society of Chemical Industry     

Experimental study of melting of LDPE/PS polyblend in an intermeshing counter‐rotating twin screw extruder

An experimental study is presented of the melting mechanism in a starve‐fed closely intermeshing counter‐rotating twin screw extruder of a modular Leistritz design. Various polymeric materials, semicrystalline low density polyethylene (LDPE), amorphous polystyrene (PS), and (LDPE/PS) polyblend were investigated at various operating conditions. A “screw pulling‐out” technique was used to investigate polymer behavior along the screw axis. In particular, the solid conveying, melting positions, the extent of starved character along the screw, and the fully filled regions were observed. Polymer samples were stripped off from each screw which was removed from the machine to investigate melting mechanism. Generally, it has been concluded that the melting mechanism revealed by White and Wilczyński for polyolefines has been proved for other polymeric materials under study. This mechanism consists of pellets being dragged into the calendering gap where they are melted due to calendering action. The molten polymer is expelled from the gap and pushes against the pellet bed which is continuously dragged into the gap. The composite modeling of an intermeshing counter‐rotating twin screw extrusion of polyblends has also been discussed. POLYM. ENG. SCI., 52:449–458, 2012. © 2011 Society of Plastics Engineers