Application of the general rate model with the Maxwell-Stefan equations for the prediction of the band profiles of the 1-indanol enantiomers

The adsorption isotherm data of R- and S-1-indanol and of their racemic mixture on cellulose tribenzoate were measured by frontal analysis. These experimental data were fitted to the single-component and the modified competitive Bilangmuir isotherms. The overloaded elution profiles of bands of the pure enantiomers and of the racemic mixture were calculated for different sample sizes, using the best competitive isotherm model and the General Rate Model of chromatography coupled with the generalized Maxwell-Stefan equation that describes the surface diffusion flux. The calculated and the experimental profiles were found to be in excellent agreement in all cases. The parameters of the model of the mass transfer kinetics were derived from the band profiles obtained for the pure enantiomers. The same values of these parameters give an excellent prediction of the profiles of multicomponent bands. The new model described here allows a satisfactory interpretation of the competitive mass transfer kinetics.     

Studies on obtaining of aluminium ammonium calcium phosphates

Aluminium ammonium calcium phosphates were prepared with the use of AlCl₃, CaCO₃, H₃PO₄. The influence of the process parameters (pH 5 ± 3, the molar ratios of Ca²⁺:Al⁺³:PO₄^?3 in the substrates, respectively 0.31:0.62:1; 0.5:0.5:1; 0.72:0.36:1, temperature 40 ± 20 °C) on the phase composition and the product properties was determined. The process parameters that enable to obtain the material with expected physicochemical properties were determined based on the statistical evaluation of the experiments (fractional factorial design at three levels 3^(k?p)27). The phase composition of the obtained samples was studied with the use of XRD analysis. The specific surface area was calculated with the use of S_BET method and the particle size was determined by the laser scanning microscopy. The materials with the molar ratio of Al³⁺/NH₄⁺ and Al³⁺/Ca²⁺ in the range of 0.70–27.93 and 0.47–24.48, respectively, with an absorption oil number of 95–157 g/100 g paraffin oil, the S_BET within 25–118 m²/g, the pore volume within 0.14–0.74 cm³/g and the particle size in the range of 168–285 nm were obtained.     

Polyurethane/Polylactide-Based Electrospun Nonwovens as Carriers for Human Adipose-Derived Stromal Stem Cells and Chondrogenic Progenitor Cells

Articular cartilage dysfunctions are major cause of pain and disability and lead to serious health complications. Cell-based therapies are proposed as treatment methods for cartilage regeneration. In this study, we proposed polyurethane/poly(L-lactide-co-D, L-lactide)-based electrospun nonwovens as carriers for the delivery of human adipose-derived stromal stem cells. We found that 6:4 and 8:2 polyurethane/poly(L-lactide-co-D, L-lactide) initially enhance proliferative rate of human adipose-derived stromal stem cells, shorten their population doubling time, promote creation of functional chondrogenic nodules during chondrogenic differentiation, improve the collagen-2-to-collagen-1 protein ratio, and upregulate the expression of collagen-2 and aggrecan genes.     

The influence of electron beam irradiation,plastic deformation,and re‐irradiation on crystallinity degree,mechanical and sclerometric properties of GUR 1050 used for arthroplasty

The article describes the influence of an electron beam irradiation (I), plastic deformation (D), and re‐irradiation (R) on the properties of ultrahigh molecular weight polyethylene (GUR 1050). It was found that the modification through irradiation entailed a gradual increase in the degree of crystallinity (after irradiation–I). After plastic deformation and re‐irradiation (IDR) the degree of crystallinity decreases which had a direct influence on the mechanical properties. The polymer irradiation only (technique I) resulted in an increase in the maximum stress as compared with the material in the initial state. The application of deformation and re‐irradiation (technique IDR) allowed increasing the deformation resistance by more than 40%. Moreover, the irradiation with an electron beam resulted in the increase in hardness (H) and Young's modulus (E) proportionally to the applied irradiation dose and in the reduction of total indentation work (W_tot) and its components. After deformation and re‐irradiation the polyethylene hardness went down. The application of technique (I) caused an improvement to the material abrasion resistance (reduction of parameter PD–working scratch depth) with the increasing irradiation dose. The introduction of deformation and re‐irradiation did not have a material impact on parameter (PD) increasing at the same time elastic properties of UHMWPE (increase in parameter NPS–elastic recovery). Modification IDR has changed the wear mechanism (β) toward ploughing and has increased the abrasion‐resistance index (W_β) and also significantly reduced the coefficient of friction (μ) of GUR 1050. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43683.     

Structural studies of poly(butyl acrylate) - poly(ethylene oxide) miktoarm star polymers

Structural behavior of miktoarm star polymers comprising poly(butyl acrylate) (PBA) and poly(ethylene oxide) (PEO) arms was studied by means of Differential Scanning Calorimetry (DSC), Wide Angle X-Ray Scattering (WAXS), Polarized Optical Microscopy (POM) and Fourier Transform Infrared Spectroscopy (FTIR) methods. The aim of this study was to correlate changes in the composition of the arms of the PBA/PEO miktoarm star polymers with their structures. As a consequence of increasing PBA content, the decrease in crystallinity of the studied PBA/PEO heteroarm star copolymers was observed. Regardless of the copolymer composition, fraction of oxyethylene units in the crystalline PEO phase was similar in all investigated systems. The POM images showed spherulitic morphology of the materials having low PBA content, while an increase in PBA arms fraction leads to the formation of less ordered structures. The analysis of FTIR vibrational spectrum indicates helical conformation of PEO chains in the crystalline phase. Isothermal crystallization studies carried out using the FTIR technique suggest the existence of isolated domains in the nanoscopic scale of investigated materials.     

The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002     

Experimental study of melting of LDPE/PS polyblend in an intermeshing counter‐rotating twin screw extruder

An experimental study is presented of the melting mechanism in a starve‐fed closely intermeshing counter‐rotating twin screw extruder of a modular Leistritz design. Various polymeric materials, semicrystalline low density polyethylene (LDPE), amorphous polystyrene (PS), and (LDPE/PS) polyblend were investigated at various operating conditions. A “screw pulling‐out” technique was used to investigate polymer behavior along the screw axis. In particular, the solid conveying, melting positions, the extent of starved character along the screw, and the fully filled regions were observed. Polymer samples were stripped off from each screw which was removed from the machine to investigate melting mechanism. Generally, it has been concluded that the melting mechanism revealed by White and Wilczyński for polyolefines has been proved for other polymeric materials under study. This mechanism consists of pellets being dragged into the calendering gap where they are melted due to calendering action. The molten polymer is expelled from the gap and pushes against the pellet bed which is continuously dragged into the gap. The composite modeling of an intermeshing counter‐rotating twin screw extrusion of polyblends has also been discussed. POLYM. ENG. SCI., 52:449–458, 2012. © 2011 Society of Plastics Engineers     

Rhodium(I) complex catalyst immobilized on terpolymers of N‐vinylpyrrolidinone and 1‐vinylimidazole

The hydrosilylation of cyclohexanone and acetone with triethysilane and diphenysilane catalyzed by polymer‐supported Rh(I) complex has been investigated. Two terpolymers of styrene, divinylbenzene, and 1‐vinylimidazole (S/DVB/VI) or N‐vinylpyrrolidinone (S/DVB/NVP) were used as the catalysts supports. Physical characterization of these materials has involved the measurements of the structural parameters in the dry and swollen states by DSC, the nitrogen BET adsorption method and inverse steric exclusion chromatography ISEC. From these results it can be concluded that the original polymer structure has been changed during the complex attachment giving rise to materials of higher porosity. X‐ray photoelectron spectroscopy XPS, IR, and AAS spectroscopy were used to characterization of heterogeneous complexes before and after use. The effect of the morphology of the support on the catalytic properties of the polymer‐supported Rh(I) species was tested in the hydrosilylation of ketones and correlated with the reaction mechanism. It was demonstrated that the high selectivity of homogeneous rhodium complex toward the silyl ethers can be partially reversed to the dehydrogenative silylation products by a proper choice of polymer support with favorable microporous structure. Recycling tests demonstrated high stability of the supported catalysts during prolonged use. The constant selectivity of the supported catalysts demonstrated during recycling experiments showed that they could be useful for practical application. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Selective separation of yttrium from rare earth elements by ion interaction chromatography. Analytical and larger scale applications

ABSTRACT

New ion interaction chromatographic (IIC) method employing Kromasil 100 C₁₈ column and tetra-n-butylammonium hydroxide (TBAOH) as an ion interaction reagent (IIR) is able to separate yttrium from Rare Earth Elements (REE) as anionic complexes with nitrilotriacetic acid (NTA). New method for the chromatographic determination of Y in REE mixture was devised and validated by the analysis of the certified reference material (CRM). Potential possibilities of the new chromatographic system for larger scale applications including macro-micro events were demonstrated.     

A Stochastic Petri Net-Based Model of the Involvement of Interleukin 18 in Atherosclerosis

Interleukin 18 (IL-18) is a proinflammatory and proatherogenic cytokine with pleiotropic properties, which is involved in T and NK cell maturation and the synthesis of other inflammatory cytokines and cell adhesion molecules. It plays a significant role in orchestrating the cytokine cascade, accelerates atherosclerosis and influences plaque vulnerability. To investigate the influence of IL-18 cytokine on atherosclerosis development, a stochastic Petri net model was built and then analyzed. First, MCT-sets and t-clusters were generated, then knockout and simulation-based analysis was conducted. The application of systems approach that was used in this research enabled an in-depth analysis of the studied phenomenon. Our results gave us better insight into the studied phenomenon and allow revealing that activation of macrophages by the classical pathway and IL-18-MyD88 signaling axis is crucial for the modeled process.